CREE LM1-PPP1-01-N1 Smd led Datasheet

Cree® SMD LED
Model # LM1-PPP1-01-N1
Data Sheet
120-degree, 3.2 x 2.8-mm, SMT LED in full color with water-transparent lens
Applications
•
•
•
•
Indoor and Outdoor Displays
Backlighting
Coupling into Light Guides
RGB Full-Color Displays
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
R
G
B
IF
50
25
25
mA
IFP
200
100
100
mA
Reverse Voltage
VR
5
5
5
V
Power Dissipation
PD
125
100
100
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
+110
110
110
°C
RTHJA
450
400
450
°C/W
RTHJA
650
580
680
°C/W
Junction/solder point 1 chip on
RTHJS
300
280
300
°C/W
Junction/solder point 3 chips on
RTHJS
450
430
480
°C/W
Forward Current
Note 1
Peak Forward Current
Note 2
Junction/ambient 1 chip on
Note 3
Junction/ambient 3 chips on
Note 3
Notes:
1.
2.
3.
Single-color light.
Pulse width <=0.1 msec, duty <=1/10.
RTH test condition: mounted on PC Board FR 4 (pad size >=16mm2)
D-CT149.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C)
Values
Characteristics
Condition
Symbol
Wavelength at peak emission
IF = 20 mA
Dominant Wavelength
IF = 20 mA
Spectral bandwidth at 50% IREL max
IF = 20 mA
λ
24
38
28
nm
Viewing Angle at 50% IV
IF = 20 mA
2θ½
120
120
120
deg
Forward Voltage
IF = 20 mA
V
Luminous Intensity
Reverse Current (max)
IF = 20 mA
VR = 5 V
Unit
R
G
B
λPEAK
620
520
465
nm
λDOM
612~622
520~540
460~480
nm
VF(avg)
2.0
3.4
3.4
VF(max)
2.5
4.0
4.0
V
IV(min)
180
280
71
mcd
IV(avg)
300
450
110
mcd
IR
10
10
10
μA
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LM1-PPP1-01-N1 (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown.
Orders for LM1-PPP1-01-N1 may be filled with any or all bins contained as below.
Luminous Intensity (IV)
Luminous Intensity (IV)
Luminous Intensity (IV)
All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA.
U or
above
450 mcd
T
280 mcd
S
180 mcd
612 nm
Dominant Wavelength (λD)
622 nm
V or
above
710 mcd
U
450 mcd
T
280 mcd
520 nm
Dominant Wavelength (λD)
540 nm
S or
above
180 mcd
R
112 mcd
Q
71 mcd
460 nm
Dominant Wavelength (λD)
480 nm
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of the dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT149.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs
Document No.
Rev. No.
SPE/LM1-PPP1-01-N1
02
Graphs
100%
BLUE
RED
GREEN
80%
60%
40%
20%
0%
400
350
450
500
600
550
650
700
Wd(nm)
RELATIVE INTENSITY VS, DOMINANT WAVE LENGTH
If (mA)
If (mA)
100.0
80.0
100.0
80.0
GREEN
60.0
60.0
40.0
40.0
BLUE
20.0
0.0
3.0
Vf(V)
3.4
3.8
4.2
4.6
RED
20.0
0.0
1.8
5.0
FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vf(V)
2.0
2.2
2.4
2.6
5.0
5.0
4.0
4.0
RED
3.0
3.0
2.0
2.0
1.0
1.0
BLUE
GREEN
0.0
0.0
If(mA)
20.0 40.0 60.0
80.0 100.0
RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT.
0.0
0.0
If(mA)
20.0
40.0
60.0
80.0
CLD-CT149.000
4/6
100.0
RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
2.8
FORWARD CURRENT VS.
FORWARD VOLTAGE.
Format #:
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
COTCO-D-074
REV.4
Document No.
Rev. No.
Graphs
SPE/LM1-PPP1-01-N1
02
Graphs
50% Power Angle :
0
100%
80%
60%
40%
20%
-30
-60
-90
0
0%
90
60
30
FAR FIELD PATTERN
70
IF(mA)
70
60
60
RED
50
RED
50
40
40
30
30
GREEN
GREEN
20
20
BLUE
10
0
20
60
40
80
BLUE
10
T( C)
0
70
IF(mA)
IF(mA)
T( C)
0
0
100
70
20
40
60
80
100
60
80
100
IF(mA)
60
60
RED
50
RED
50
40
40
30
30
GREEN
GREEN
20
20
BLUE
10
T( C)
0
0
20
40
60
BLUE
10
80
100
5/6
T( C)
0
0
20
40
Format #: COTCO-D-074
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT149.000
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No.
Rev. No.
SPE/LM1-PPP1-01-N1
02
Graphs
CIE 1931 Graph
the color coordinates of the mixed light can be expected within the area of the color triangle marked a).
The color coordinates of the mixed light can be expected within the area of the color triangle marked “a)”.
the
point
(x=0.33,y=0.33)
is marked“+”
Theachromatic
achromatic
point
(x=0.33,y=0.33)
is marked “+”.
Items
Signatures
Date
Prepared by
Meiliping
2005-07-06
Rev.No
Checked by
XieJH
2005-07-06
02
Approved by
DavidLiu
2005-07-06
FCN#
Revision History
Date
Change Description
2005-07-06 Release.
FCN20050192
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright@2002 Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
6/6
CLD-CT149.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074
REV.4
displays
Document No.
Rev. No.
Mechanical Dimensions
Dimension Draw ing
SPE/LM1-PPP1-01-N1
02
All dimensions are in mm.
uides
ays
ings at Ta = 25°C
Absolute maximum
Rating
R
G
B
Unit
IF
50
25
25
mA
IFP
200
100
100
mA
VR
5
5
5
V
PD
125
100
100
mW
Symbol
Topr
-40~+100
°C
Tstg
-40~+100
°C
Tj
+110
+110
+110
°C
*3
Rth JA
450
400
450
°C/W
*3
Rth JA
650
580
680
°C/W
on
Rth JS
300
280
300
°C/W
on
Rth JS
450
430
480
°C/W
width <=0.1msec duty <=1/10 *3 Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2)
tiical Characteristics ( Ta = 25°C)
Condition
Symbol
IF=20mA
IF=20mA
Notes
on
Irel max
IF=20mA
RoHS Compliance
Values
Unit
R
G
B
Opeak
620
520
465
nm
Odom
612~622
520~540
460~480
nm
24
38
28
nm
O
120
120 biologically
120 toxic (PBT),
Deg.
=20mAof environmentally
2 T½
TheIFlevels
sensitive,
persistent
persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted
for such
in an exempted
VF(avg)
2.0 substances,
3.4or are used3.4
V application, in accordance with EU DirectiveIF2002/95/EC
on the restriction of the use of certain hazardous substances in electrical and electronic equipment
=20mA
(RoHS), as amended
V through April
2.521, 2006. 4.0
4.0
V
F(max)
Iv(Min)
180
280
71
mcd
Vision Advisory Claim
IF=20mA
Iv(Avg)
110 product. The
mcd
Users should be cautioned
not to300
stare at the 450
light of this LED
bright light can damage the eye.
VR=5V
IR
10
10
10
PA
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT149.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Contact Cree Sales
Description
SMD 120 Full Color, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT149.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages