DO Series • Mini-SIP SSR • Ratings to 1A @ 60 V DC • Bi-polar transistor output • DC control • Normally open or normally closed output PRODUCT SELECTION Control Voltage 3-9 VDC 1.7-9 VDC 1A DO061A (4), DO061A-B DO061B (4), DO061B -B AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description DO0 Operating Voltage Range (47-63Hz) [VDC] Maximum Off-State Leakage Current @ Rated Voltage [µA] Maximum Load Current [Adc] Minimum Load Current [Adc] Maximum Surge Current [Adc] Maximum On-State Voltage Drop @ Rated Current Minimum Power Factor (with Maximum Load) 3-60 200 1.0 0.02 5 (1sec) 1.5 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [µsec] Maximum Turn-Off Time [µsec] DO061A DO061B 3-9 VDC 3.0 VDC 1.0 VDC 15 mAdc 270 Ohm 50 50 1.7-9 VDC 1.7 VDC 0.8 VDC 15 mAdc 270 Ohm 50 150 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz)(3) Minimum Insulation Resistance (@ 500 VDC)(3) 4000 Vrms 109 Ohm Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation 8 pF -30 to 80 °C -30 to 125 °C 0.15 oz. (4.3g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Typical On-State Resistance=.13 3) Dielectric and ins ulation resistance are measured between input and output 4) Inductive loads should be diode suppressed MECHANICAL SPECIFICATIONS DC C ONTROL PIN 1: +DC LOAD PIN 2: -DC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 010411 ANNEX - ENVIROMENTAL INFORMATION