ACT ACTF9228 Low-loss rf filter Datasheet

Features
ACTF9228-1120-DCC6C
 Low-loss RF filter for mobile systems
 Low amplitude ripple
 No matching network required for operation at 50Ω
 Ceramic package for Surface Mounted
Technology (SMT)
 Lead-free production and RoHS compliant
Package Dimensions
Ceramic Package: DCC6C
Pin Configuration
2
Input
5
Output
1, 3, 4, 6
Ground
Marking
Top View, Laser Marking
"ACT”:
Manufacturer’s mark
“9228”:
Part number
“F”:
SAW filter
Maximum Ratings
Rating
Input Power Level
P
Value
Unit
10
dBm
DC Voltage
VDC
12
V
Operating Temperature Range
TA
-40 ~ +85
°C
Storage Temperature Range
Tstg
-40 ~ +85
°C
Electrical Characteristics (@25oC)
Minimum
Typical
Parameter
Unit
Center frequency
MHz
1120
Insertion Loss
dB
5.0
3 dB Bandwidth
MHz
40 dB Bandwidth
MHz
8
19
Fo-9MHz
dB
37
40
Attenuation
Fo+12MHz
dB
40
43
RoHS Compliant
Typical Frequency Response
1.5
ohm
5.5
9.5
Relative
SWR (Fo±3MHz)
Input/Output Impedance
Maximum
50
Electrostatic Sensitive Device
20.5
1.8
S11and S22
Stability Characteristics
Test item
Condition of test
1
Mechanical shock
(a) Drops: 3 times on concrete floor
(b) Height: 1.0 m
2
Vibration resistance
(a) Frequency of vibration: 10~55Hz
(c) Directions: X,Y and Z
(b) Amplitude: 1.5 mm
(d) Duration: 2 hours
3
Moisture resistance
(a) Condition: 40°C, 90~95% R.H.
(c) Wait 4 hours before measurement
(b) Duration: 96 hours
4
Climatic sequence
(a) +70°C for 16 hours
(b) +55°C for 24 hours, 90~95% R.H.
(c) -25°C for 2 hours
(d) +40°C for 24 hours, 90~95% R.H.
(e) Wait 4 hours before measurement
5
High temperature exposure
(a) Temperature: 70°C
(c) Wait 4 hours before measurement
6
Thermal impact
(a) +70°C for 30 minutes  -25°C for 30 minutes repeated 3 times
(b) Wait 4 hours before measurement
(b) Duration: 250 hours
Requirements: The SAW filer shall remain within the electrical specifications after tests.
Remarks
 SAW devices should not be used in any type of fluid such as water, oil, organic solvent, etc.
 Be certain not to apply voltage exceeding the rated voltage of components.
 Do not operate outside the recommended operating temperature range of components.
 Sudden change of temperature shall be avoided, deterioration of the characteristics can occur.
 Be careful of soldering temperature and duration of components when soldering.
 Do not place soldering iron on the body of components.
 Be careful not to subject the terminals or leads of components to excessive force.
 SAW devices are electrostatic sensitive. Please avoid static voltage during operation and storage.
 Ultrasonic cleaning shall be avoided. Ultrasonic vibration may cause destruction of components.
Test Circuit
Recommended Land Pattern
Recommended Soldering Profile
Packing Information
Carrier Tape
Reel Dimensions
Outer Packing
Type
Quantity
Dimension
Description
Weight
Carton Box
10000
190×190×95
0.85
Carton Box Ⅱ
20000
190×190×190
anti-static plastic bag & carton box
1 reel / bag
5 bags / box (10000 pcs)
10 bags / box (20000 pcs)
Unit: mm
1.80
Unit: kg
C ACT 2011. All Rights Reserved.
○
1.
2.
3.
The specifications of this device are subject to change or obsolescence without notice.
Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility
of the equipment manufacturer.
Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes
and circuits implemented within components or assemblies.
Similar pages