CC-E Series Ultra Compact, 1.5W to 25W Single and Dual DC-DC Converters Features u Compact Footprint / Low Profile u Through Hole or SMT Versions u 5V, 12V, 24V & 48V Inputs u 3.3 to 30V1 Single, ±12 to 15V Dual Outputs u Output Voltage Adjustment u Input - Output Isolation u RoHS Compliant u 5 Year Warranty u Self contained u Multiple Input Voltage configurations u Open frame (no potting) Key Market Segments & Applications Specifications Model V 3.3V 5V 12/15V ±12/15 (24/30)1 V 5V: 4.5-9.0V, 12V: 9-18V, 24V: 18-36V, 48V: 36-76V % 71 to 90% model dependant % 1.5-10W: ±3%, 15-25W: ±5% ±5% V 3.15-3.6V (5) 4.75-6.0V (5) 11.4-15V 22.8 - 30V mV 20 (40 CC15; 30 CC25) 40 80 mV 40 (120 CC15; 200 CC25) 100 6002 % <± 0.02%/°C No preload required mV 40/120 30/120 Output current limiting with automatic recovery, shutdown CC15, 25 type No - CC1R5, 3, 6, & 10: RC terminal open, output is OFF; RC terminal to -Vin (0-0.4V), output is ON CC15 & CC25: RC terminal open, output is ON; RC terminal to +Vin, output is OFF Operating Temp.- Convection °C -40 to 85°C, derates linearly to 40% load from 50°C to 85°C Operating Temp.- Forced Air °C -40°C to 85°C with 1m/s air full load Storage Temperature °C -40°C to 85°C Humidity (non Condensing) 95% RH max.(maximum wet-bulb temperature: 38°C) Isolation Voltage 500VAC 1 min. Input to output, input to case, output to case Isolation Resistance Input to output, input to case, output to case: 50M ohm min. (500VDC) Shock m/s2 980m/s2 (100G) 6ms (6 directions, each 3 times) Vibration (non Operating) 10 to 55Hz (sweep for 15min) 1.52mm constant, 3 directions X, Y, Z each 2 hours Safety Agency Approvals UL60950-1, CSA60950-1, EN60950-1, CE Mark Weight g CC1R5: 3.2, CC3: 4.5, CC6: 5.8, CC10:10.0, CC15: 12.5, CC25: 20.0 Size (L x W x H) in CC1R5: 0.650 x 0.654 x 0.335; CC3: 0.900 x 0.654 x 0.335; CC6: 0.900 x 0.831 x 0.335 (DIP Through Hole and SMD package) CC10: 1.400 x 0.890 x 0.335; CC15: 1.500 x 1.264 x 0.295; CC25: 1.701 x 1.768 x 0.295 (SIP Through Hole only) CC3 (SIP): 1.09 x 0.362 x 0.705 Warranty 5 years Nominal Output Voltage DC Input Efficiency Output Voltage Tolerance Output Adjustment (via trim pin) Line Regulation Load Regulation Temperature Coefficient Preload Output Ripple (typ./max.BW 50MHz) Overcurrent Protection Overvoltage Protection Remote On/ Off 1. For 24V/30V output - connnect across +Vout & -Vout and leave “common out” pin not connected 2. Based upon equal load current from both outputs 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 3. For 15V output connect trim to -Vout 4. See Installation Manual for full specs, test methods of parameters & application notes 5. Not available on CC15 and CC25 models 13 CC-E Series Model Selector Output Output Current (A) Power (W) Single Outputs 3.3 3.3 3.3 3.3 3.3 3.3 5 5 5 5 5 5 5 12(15) 12(15) 12(15) 12(15) 12(15) Dual Outputs ±12 (15)3 ±12 (15)3 ±12 (15)3 ±12 (15)3 ±12 (15)3 5V Input 12V Input 24V Input 48V Input 0.4 0.8 1.2 2.5 4.5 7.5 0.3 0.6 1.0 1.2 2.0 3.0 5.0 0.125(0.1) 0.25(0.2) 0.5(0.4) 0.8(0.64) 1.0(0.8) 1.5 3 6 10 15 25 1.5 3 5 6 10 15 25 1.5 3 6 10 10 CC1R5-0503SF-E CC3-0503SF-E CC6-0503SF-E CC10-0503SF-E CC1R5-0505SF-E CC3-0505SF-E CC6-0505SF-E CC10-0505SF-E CC1R5-0512SF-E CC3-0512SF-E CC6-0512SF-E CC10-0512SF-E - CC1R5-1203SF-E CC3-1203SF-E CC6-1203SF-E CC10-1203SF-E CC1R5-1205SF-E CC3-1205SF-E CC6-1205SF-E CC10-1205SF-E CC1R5-1212SF-E CC3-1212SF-E CC6-1212SF-E CC10-1212SF-E CC1R5-2403SF-E CC3-2403SF-E CC6-2403SF-E CC10-2403SF-E CC15-2403SF-E CC25-2403SF-E CC1R5-2405SF-E CC3-2405SF-E CC6-2405SF-E CC10-2405SF-E CC15-2405SF-E CC25-2405SF-E CC1R5-2412SF-E CC3-2412SF-E CC6-2412SF-E CC10-2412SF-E CC1R5-4803SF-E CC3-4803SF-E CC6-4803SF-E CC10-4803SF-E CC1R5-4805SF-E CC3-4805SF-E CC6-4805SF-E CC10-4805SF-E CC1R5-4812SF-E CC3-4812SF-E CC6-4812SF-E CC10-4812SF-E 0.06(0.05) 0.125(0.1) 0.25(0.2) 0.4(0.32) 0.45(0.36) 1.5 3 6 10 10 CC1R5-0512DF-E CC3-0512DF-E CC6-0512DF-E CC10-0512DF-E - CC1R5-1212DF-E CC3-1212DF-E CC6-1212DF-E CC10-1212DF-E CC1R5-2412DF-E CC3-2412DF-E CC6-2412DF-E CC10-2412DF-E CC1R5-4812DF-E CC3-4812DF-E CC6-4812DF-E CC10-4812DF-E Outline Drawing Outline Drawing CC10- F-E (DIP TYPE) 8.4 (8.5max.) CC10- R-E (SMD TYPE) 4.0 8.5 (8.8max.) 22.6±0.2 22.6±0.2 4.0 Output Voltage (V) t=0.3 3.5 t=0.3 35.56 6 7-0.3⋅ 0.6 1 10 9 7 Options Version F-E R-E S-E 3 4 2 5 7-0.3⋅ 0.6 1 6 7 Pinout (CC1R5, 3, 6, and 10) Description Through hole mounting (DIP pkg) Surface mount (DIP pkg) Through hole mounting (SIP pkg - CC3) Other Industrial Products PX PAQ, PAH, PAF 5.08 (3.68) 1.0 1.8 5.08 5.08 5.08 (3.68) 10.16 5 (3.68) 10.16 4 2 1.8 No.10, 11 2.7 11 Coplanarity 0.1max. 38.86 2.7 0.5 8 5.08 5.08 5.08 5.08 5.08 (3.68) 3 No.8, 9 3.5 25.4 5.08 0.5 25.4 35.56 10 - 40W 12, 24, 48V DC-DC converters 50 -700W quarter, half & full bricks Pin 1 2 3 4 5 6 7 Single Dual +Vin +Vin RC RC -Vin -Vin NC -Vout -Vout Common out TRM TRM +Vout +Vout For CC15 and 25 see Installation Manual online For Additional Information, please visit us.tdk-lambda.com/lp/products/cc-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 14 Revision A7: Nov 2011