NTD4806N, NVD4806N Power MOSFET 30 V, 76 A, Single N−Channel, DPAK/IPAK Features • • • • • Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses AEC−Q101 Qualified and PPAP Capable − NVD4806N These Devices are Pb−Free and are RoHS Compliant http://onsemi.com RDS(on) MAX V(BR)DSS 6.0 mW @ 10 V 30 V Applications D MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) N−Channel Symbol Value Unit Drain−to−Source Voltage VDSS 30 V Gate−to−Source Voltage VGS "20 V ID 15.6 A Parameter G S Continuous Drain Current (RqJA) (Note 1) TA = 25°C Power Dissipation (RqJA) (Note 1) TA = 25°C PD 2.65 W Continuous Drain Current (RqJA) (Note 2) TA = 25°C ID 11.3 A 3 DPAK CASE 369AA (Bent Lead) STYLE 2 TA = 85°C 4 12 4 1 2 8.8 PD 1.4 W Continuous Drain Current (RqJC) (Note 1) TC = 25°C ID 79 A Power Dissipation (RqJC) (Note 1) TC = 25°C TC = 85°C MARKING DIAGRAMS & PIN ASSIGNMENTS 61 PD 68 W TA = 25°C IDM 150 A TA = 25°C IDmaxPkg 45 A TJ, Tstg −55 to 175 °C IS 50 A Drain to Source dV/dt dV/dt 6.0 V/ns Single Pulse Drain−to−Source Avalanche Energy (VDD = 24 V, VGS = 10 V, L = 1.0 mH, IL(pk) = 21 A, RG = 25 W) EAS 220 mJ Lead Temperature for Soldering Purposes (1/8″ from case for 10 s) TL 260 °C tp=10ms Current Limited by Package Operating Junction and Storage Temperature Source Current (Body Diode) 2 3 IPAK CASE 369AD (Straight Lead) STYLE 2 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 4 Drain 4 Drain AYWW 48 06NG TA = 85°C 1 AYWW 48 06NG Steady State TA = 25°C Pulsed Drain Current 76 A 9.4 mW @ 4.5 V • CPU Power Delivery • DC−DC Converters • Low Side Switching Power Dissipation (RqJA) (Note 2) ID MAX 2 1 Drain 3 Gate Source A Y WW 4806N G 1 2 3 Gate Drain Source = Assembly Location* = Year = Work Week = Device Code = Pb−Free Package * The Assembly Location code (A) is front side optional. In cases where the Assembly Location is stamped in the package, the front side assembly code may be blank. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. © Semiconductor Components Industries, LLC, 2014 June, 2014 − Rev. 10 1 Publication Order Number: NTD4806N/D NTD4806N, NVD4806N THERMAL RESISTANCE MAXIMUM RATINGS Parameter Symbol Value Unit RqJC 2.2 °C/W Junction−to−Case (Drain) Junction−to−Tab (Drain) RqJC−TAB 3.5 Junction−to−Ambient − Steady State (Note 1) RqJA 56.7 Junction−to−Ambient − Steady State (Note 2) RqJA 106.8 1. Surface−mounted on FR4 board using 1 in sq pad size, 1 oz Cu. 2. Surface−mounted on FR4 board using the minimum recommended pad size. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 30 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate−to−Source Leakage Current V 27 VGS = 0 V, VDS = 24 V mV/°C TJ = 25°C 1.0 TJ = 125°C 10 IGSS VDS = 0 V, VGS = "20 V VGS(TH) VGS = VDS, ID = 250 mA mA "100 nA 2.5 V ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On Resistance RDS(on) 6.0 VGS = 10 to 11.5 V VGS = 4.5 V Forward Transconductance gFS 1.5 ID = 30 A 4.9 ID = 15 A 4.8 ID = 30 A 7.9 ID = 15 A 7.5 VDS = 15 V, ID = 15 A mV/°C 6.0 mW 9.4 14 S 2142 pF CHARGES AND CAPACITANCES Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VGS = 0 V, f = 1.0 MHz, VDS = 12 V 480 251 Total Gate Charge QG(TOT) 15 Threshold Gate Charge QG(TH) 3.0 Gate−to−Source Charge QGS Gate−to−Drain Charge QGD Total Gate Charge QG(TOT) VGS = 4.5 V, VDS = 15 V, ID = 30 A 23 nC 7.0 7.0 VGS = 11.5 V, VDS = 15 V, ID = 30 A 37 nC 13.9 ns SWITCHING CHARACTERISTICS (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(on) tr td(off) VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 29.7 18.3 7.8 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTD4806N, NVD4806N ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) (continued) Parameter Symbol Test Condition Min Typ Max Unit SWITCHING CHARACTERISTICS (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(on) tr td(off) ns 8.5 VGS = 11.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 23.8 26 4.7 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time tRR Charge Time ta Discharge Time tb Reverse Recovery Time VGS = 0 V, IS = 30 A TJ = 25°C 0.9 TJ = 125°C 0.8 26 VGS = 0 V, dIs/dt= 100 A/ms, IS = 30 A QRR 1.2 V ns 13 13 16 nC nH PACKAGE PARASITIC VALUES Source Inductance LS 2.49 Drain Inductance, DPAK LD 0.0164 Drain Inductance, IPAK LD Gate Inductance LG 3.46 Gate Resistance RG 1.0 TA = 25°C 1.88 W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 3 NTD4806N, NVD4806N TYPICAL PERFORMANCE CURVES 100 ID, DRAIN CURRENT (AMPS) 6V 5V 4.5 V 80 70 ID, DRAIN CURRENT (AMPS) 10 V 90 4.2 V 4V 60 50 3.8 V 40 30 3.6 V 20 3.4 V 10 3.2 V 0 1 4 3 2 VDS ≥ 10 V TJ = 125°C TJ = 25°C TJ = −55°C 0 5 1 2 3 4 6 5 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 0.048 ID = 30 A TJ = 25°C 0.043 0.038 0.033 0.028 0.023 0.018 0.013 0.008 0.003 3 4 5 6 7 8 9 10 0.015 TJ = 25°C VGS = 4.5 V 0.010 VGS = 11.5 V 0.005 0 50 55 60 65 70 75 80 85 90 VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPS) Figure 3. On−Resistance vs. Gate−to−Source Voltage Figure 4. On−Resistance vs. Drain Current and Gate Voltage 100,000 2.0 VGS = 0 V ID = 30 A VGS = 10 V TJ = 175°C 10,000 1.5 IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 1.0 0.5 0 −50 −25 1000 TJ = 125°C 100 10 0 25 50 75 100 125 150 175 5 10 15 20 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Drain Voltage http://onsemi.com 4 25 NTD4806N, NVD4806N C, CAPACITANCE (pF) 4000 VDS = 0 V VGS = 0 V VGS , GATE−TO−SOURCE VOLTAGE (VOLTS) TYPICAL PERFORMANCE CURVES TJ = 25°C Ciss 3000 Ciss 2000 Crss 1000 Coss 0 10 Crss 0 5 VGS 5 10 15 20 25 VDS 8 6 QT Q1 4 2 0 15 5 10 QG, TOTAL GATE CHARGE (nC) 20 Figure 8. Gate−To−Source and Drain−To−Source Voltage vs. Total Charge Figure 7. Capacitance Variation 30 1000 100 IS, SOURCE CURRENT (AMPS) VDD = 15 V ID = 30 A VGS = 11.5 V t, TIME (ns) ID = 30 A VGS = 4.5 V TJ = 25°C 0 GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (VOLTS) tr td(off) td(on) 10 tf 1 10 RG, GATE RESISTANCE (OHMS) VGS = 0 V 25 100 15 10 5 100 ms 1 ms 1 10 ms dc RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 0.1 0.1 1 10 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 100 EAS, SINGLE PULSE DRAIN−TO−SOURCE AVALANCHE ENERGY (mJ) 10 ms VGS = 20 V SINGLE PULSE TC = 25°C 0.7 0.8 1.0 0.9 Figure 10. Diode Forward Voltage vs. Current 1000 10 0.6 VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS) Figure 9. Resistive Switching Time Variation vs. Gate Resistance 100 TJ = 25°C 20 0 0.5 1 I D, DRAIN CURRENT (AMPS) VGS Q2 250 ID = 21 A 200 150 100 50 0 25 Figure 11. Maximum Rated Forward Biased Safe Operating Area 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 5 175 NTD4806N, NVD4806N TYPICAL PERFORMANCE CURVES I D, DRAIN CURRENT (AMPS) 100 100°C 25°C 125°C 10 1 1 100 10 PULSE WIDTH (ms) 1000 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 13. Avalanche Characteristics 1.0 D = 0.5 0.2 0.1 0.1 0.05 P(pk) 0.02 0.01 SINGLE PULSE 0.01 1.0E-05 1.0E-04 t1 t2 DUTY CYCLE, D = t1/t2 1.0E-03 1.0E-02 t, TIME (ms) RqJC(t) = r(t) RqJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) − TC = P(pk) RqJC(t) 1.0E-01 1.0E+00 1.0E+01 Figure 14. Thermal Response ORDERING INFORMATION Package Shipping† NTD4806NT4G DPAK (Pb−Free) 2500 / Tape & Reel NTD4806N−35G IPAK Trimmed Lead (3.5 ± 0.15 mm) (Pb−Free) 75 Units / Rail NVD4806NT4G DPAK (Pb−Free) 2500 / Tape & Reel Order Number †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 6 NTD4806N, NVD4806N PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369AA ISSUE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C A A E b3 c2 B 4 L3 Z D 1 2 H DETAIL A 3 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z L4 b2 e c b 0.005 (0.13) M C H L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 −−− 0.040 0.155 −−− 6.17 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 −−− 1.01 3.93 −−− NTD4806N, NVD4806N PACKAGE DIMENSIONS 3.5 MM IPAK, STRAIGHT LEAD CASE 369AD ISSUE B E A E3 L2 E2 A1 D2 D L1 L T SEATING PLANE NOTES: 1.. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2.. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30mm FROM TERMINAL TIP. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD GATE OR MOLD FLASH. A1 b1 2X e A2 3X E2 b 0.13 M T D2 OPTIONAL CONSTRUCTION DIM A A1 A2 b b1 D D2 E E2 E3 e L L1 L2 MILLIMETERS MIN MAX 2.19 2.38 0.46 0.60 0.87 1.10 0.69 0.89 0.77 1.10 5.97 6.22 4.80 −−− 6.35 6.73 4.57 5.45 4.45 5.46 2.28 BSC 3.40 3.60 −−− 2.10 0.89 1.27 STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 8 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTD4806N/D