BOOKHAM ATM2400C-J28 2.5gb/s apd preamp mini-dil receiver Datasheet

Data Sheet
2.5Gb/s APD preamp Mini-DIL receiver
ATM2400C
This product is a high sensitivity optical receiver optimized for
OC-48 optical transport systems. The high sensitivity
performance given by the avalanche photodiode (APD) and
preamp make the product ideal for maximizing unamplified
transmission distances. The receiver supports FEC data rates
up to 2.7Gb/s. The DC component cancellation function
offered by the preamp allows the product to operate error free
under high input power conditions. The receiver contains an
APD, a low noise preamplifier, a precision thermistor and a
single-mode connectorized fiber pigtail, all housed in an
industry-standard Mini-DIL package.
Features:
• High sensitivity, -34dBm typical
• Better than 0dBm overload
• Industry-standard Mini-DIL package footprint
• Differential data outputs
• -40°C to +85°C maximum operating
temperature range
• RoHS 5/6 compliant
Applications:
• OC-48 Optical transport Systems
• OC-48 DWDM Metro and Long Haul Systems
• STM-16 SDH or OC-48 SONET Systems
1
Data Sheet
Operating characteristics
All parameters are measured with outputs 50 Ohm AC coupled,
specified at a case temperature of 25°C unless otherwise stated.
Optical wavelength between 1525-1575nm. Data to 1610nm
available on request.
Parameter
Symbol
Measurement
Conditions
Min
APD breakdown voltage
Vbr
Id=10µA
50
APD temperature coefficient
of breakdown voltage
TVbr
Differential Transimpedance
gain
ZT
Bandwidth[1]
Lower cut-off frequency[1]
Max
Unit
65
V
0.09
0.1
0.12
V/°C
Iph = 40µA mean
2.8
3.5
4.5
kΩ
S21
-3dB from 100MHz
1.7
2.0
S21
-3dB from 100MHz
23-1
APD sensitivity over
temperature
PRBS,
2.5Gb/s, 2
extinction ratio = 15dB
BER < 1x10-10
-5°C to +70°C case
APD sensitivity
2.5Gb/s, 223-1 PRBS
extinction ratio = 15dB
BER < 1x10-10 25°C case
GHz
50
-32
kHz
-33.5
dBm
-34
dBm
dBm
APD overload over
temperature
Psat
2.5Gb/s, 223-1 PRBS,
extinction ratio 15dB
1x10-10 BER, M=3
-5°C to +70°C case
-3
+1
Output voltage swing
at overload
VOUT
Peak-to-peak differential
220
280
Optical return loss
ORL
Power supply current
ICC
Power supply voltage
VCC
3.0
Output return loss
up to 1.8GHz
S22
10
dB
Output return loss
up to 3.0GHz
S22
5
dB
Thermistor resistance
RTH
Note:
[1] Pin = 30dBm, M = 10.
2
Typ
400
30
Beta constant = 3950
mV
dB
28
45
mA
3.3
3.6
V
10
kΩ
Data Sheet
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Operating case temperature
Top
-40
+85
°C
Storage temperature
Tstg
-40
+85
°C
+1
dBm
Optical input power
Power supply voltage
-0.5
6.0
V
APD supply voltage[1]
0
Vbr
V
Fiber bend radius
20
mm
Lead soldering time at 260°C
10
s
Note:
[1] APD bias requirements vary from device to device. APD breakdown voltage and bias
data, relative to a thermistor resistance of 10kΩ will be supplied with each device.
Class 1 ESD precautions must be observed when handling these devices.
Outline Drawing
Gull-wing formed leads
3
Data Sheet
Pin Out
Pin #
Symbol
Description
1
VAPD
APD supply voltage (+ve)
2
GND
Case ground
3
OUT_P
Data out +ve
4
GND
Case ground
5
RTH
Thermistor
6
OUT_N
Data out -ve
7
GND
Case ground
8
VCC
Power supply (+ve)
Schematic Diagram
4
Data Sheet
RoHS Compliance
Bookham is fully committed to environment
protection and sustainable development and has
set in place a comprehensive program for
removing polluting and hazardous substances from
all of its products. The relevant evidence of RoHS
compliance is held as part of our controlled
documentation for each of our compliant products.
RoHS compliance parts are available to order,
please refer to the ordering information section for
further details.
Ordering Information:
ATM2400C
- (Connector)
J28 = SC/PC
J57 = LC
e.g. ATM2400C-J28 is a 3.3 volt 2.5Gb/s APD preamp Mini-DIL
receiver with gull-wing-formed leads and an SC/PC connector.
Other options available on request.
Contact Information
North America
Bookham Worldwide
Headquarters
Europe
Paignton Office
Asia
Shenzhen Office
2584 Junction Ave.
San Jose
CA 95134
USA
Brixham Road
Paignton
Devon
TQ4 7BE
United Kingdom
2 Phoenix Road
Futian Free Trade Zone
Shenzhen 518038
China
• Tel: +1 408 919 1500
• Tel: +44 (0) 1803 66 2000
• Fax: +1 408 919 6083
• Fax: +44 (0) 1803 66 2801
• Fax: +86 755 33305805
+86 755 33305807
www.bookham.com
[email protected]
5
ISO14001:1996
EMS 504193
TL9000 Rev 3.0 (ISO9001:2000)
FM15040
• Tel: +86 755 33305888
Important Notice
Performance figures, data and any illustrative material
provided in this data sheet are typical and must be
specifically confirmed in writing by Bookham before
they become applicable to any particular order or
contract. In accordance with the Bookham policy of
continuous improvement specifications may change
without notice. The publication of information in this
data sheet does not imply freedom from patent or other
protective rights of Bookham or others. Further details
are available from any Bookham sales representative.
BH12849 Rev 1.0 January 2007.
©Bookham 2006. Bookham is a registered trademark of Bookham Inc.
Similar pages