SSE DF01S Single phase glass passivated surface mount bridge rectifier Datasheet

SHANGHAI SUNRISE ELECTRONICS CO., LTD.
DF005S THRU DF10S
SINGLE PHASE GLASS
PASSIVATED SURFACE MOUNT
BRIDGE RECTIFIER
TECHNICAL
SPECIFICATION
VOLTAGE: 50 TO 1000V CURRENT: 1.0A
FEATURES
DF-S
• For surface mount application
• Reliable low cost construction utilizing
molded plastic technique
• Surge overload rating: 50 A peak
• High temperature soldering guaranteed:
250oC/10sec/ at terminals
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: UL-94 Class V-O recognized flame
retardant epoxy
• Polarity: Polarity symbol marked on body
• Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,
derate current by 20%)
RATINGS
SYMBOL
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
VRRM
VRMS
VDC
(Ta=40oC)
Peak Forward Surge Current (8.3ms single
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
(at forward current 1.0A)
Maximum DC Reverse Current
Ta=25oC
(at rated DC blocking voltage)
o
Ta=125 C
DF
DF
005S 01S
50
100
35
70
50
100
DF
02S
200
140
200
DF
04S
400
280
400
DF
06S
600
420
600
DF
DF
UNITS
08S 10S
800 1000
V
560 700
V
800 1000
V
IF(AV)
1.0
A
IFSM
50
A
VF
1.1
V
10.0
µA
500
µA
25
-55 to +150
pF
IR
CJ
Typical Junction Capacitance
(Note 1)
Storage and Operating Junction Temperature TSTG,TJ
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
o
C
http://www.sse-diode.com
Similar pages