LCC, TLCC www.vishay.com Vishay Dale Thin Film Hermetic, 50 mil Pitch, Leadless Thin Film Chip Resistor, Surface Mount Network FEATURES • High purity alumina substrate for high power dissipation • Leach resistant terminations with nickel barrier Available • 16, 20, 24 terminal gold plated wraparound true hermetic packaging Available • Military/aerospace • Hermetically sealed • Isolated/bussed circuits • Ideal for military/aerospace applications • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Actual Size Vishay Dale Thin Film offers a wide resistance range in 16, 20, and 24 terminal hermetic leadless chip carriers. The standard circuits in the ohmic ranges listed below will utilize the outstanding wraparound terminations developed for chip resistors. Should one of the standards not fit your application, consult the applications engineering group as we may be able to meet your requirements. Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE 25 ABSOLUTE 0.1 TCR TOL. Note • Resistance range: Noted on schematics. TRACKING 5 RATIO NA SCHEMATIC TLCC 16 A01 TLCC 20 A01 TLCC 24 A01 LCC 20A 1 kΩ to 100 kΩ 10 9 8 7 10 Ω to 200 kΩ 13 12 11 10 9 1 kΩ to 100 kΩ 151413121110 (10 Isolated Resistors) 10 Ω to 250 kΩ 13 12 11 10 9 11 12 13 14 6 5 4 3 14 15 16 17 18 8 7 6 5 4 16 17 18 19 20 21 9 8 7 6 5 4 15 16 1 2 19 20 1 2 3 22 23 24 1 2 3 TLCC 16 A03 TLCC 20 A03 TLCC 24 A03 100 Ω to 100 kΩ 10 9 8 7 10 Ω to 120 kΩ 13 12 11 10 9 1 kΩ to 100 kΩ 1514 13 12 1110 11 6 12 5 13 4 14 3 14 15 16 17 18 8 7 6 5 4 19 20 1 2 3 22 23 24 1 2 3 TLCC 16 A06 TLCC 20 A06 TLCC 24 A06 100 Ω to 100 kΩ 10 9 8 7 1 kΩ to 110 kΩ 13 12 11 10 9 1 kΩ to 100 kΩ 151413121110 15 16 1 2 11 6 12 5 13 4 14 3 15 16 Revision: 14-Jul-16 1 2 14 15 16 17 18 8 7 6 5 4 19 20 1 2 3 16 17 18 19 20 21 8 7 6 5 4 19 20 1 2 3 LCC 20B 9 8 7 6 5 4 16 17 18 19 20 21 14 15 16 17 18 (19 Resistors + 1 Common Point) 10 Ω to 200 kΩ 13 12 11 10 9 14 15 16 17 18 8 7 6 5 4 19 20 1 2 3 9 8 7 6 5 4 22 23 24 1 2 3 Document Number: 60012 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LCC, TLCC www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material CONDITIONS Passivated nichrome - 16, 20, 24 - Pin/Lead Number 10 to 250 k per resistor - TCR: Absolute ± 25 ppm/°C to ± 300 ppm/°C -55 °C to +125 °C TCR: Tracking ± 5 ppm/°C -55 °C to +125 °C ± 0.1 % to ± 1.0 % +25 °C N/a - Resistance Range Tolerance: Absolute Tolerance: Ratio 50 mW max. = common circuits Power Rating: Resistor Maximum at +70 °C 100 mW max. = isolated circuits Power Rating: Package 500 mW Maximum at +70 °C R ± 0.05 % 2000 h at +70 °C - - < 5 ppm/V (typical) - Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range -55 °C to +125 °C - Storage Temperature Range -55 °C to +150 °C - Noise < -30 dB - Thermal EMF 0.008 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C - - Shelf Life Stability: Ratio Note • Tantalum nitride film is custom, consult factory. DIMENSIONS in inches and millimeters D max. B G typ. 0.008" (0.203) R Typ. Terminal 1 C Terminal 1 Indicator F A typ. DIMENSION H E Typ. 16 PINS Index Corner 20 PINS 24 PINS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A 0.050 1.27 0.050 1.27 0.050 1.27 B 0.300 7.26 0.350 8.89 0.400 10.16 C 0.300 7.26 0.350 8.89 0.400 10.16 D 0.077 1.96 0.077 1.96 0.077 1.96 E 0.025 0.635 0.025 0.635 0.025 0.635 1.27 F 0.050 1.27 0.050 1.27 0.050 G 0.040 1.02 0.040 1.02 0.040 1.02 H 0.020 0.508 0.020 0.508 0.020 0.508 Revision: 14-Jul-16 Document Number: 60012 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LCC, TLCC www.vishay.com Vishay Dale Thin Film MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Alumina Body Ceramic Terminals Gold over nickel Marking Resistance to Solvents Per MIL-PRF-83401 Tin Lead Option Sn63 Lead (Pb)-free Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Tin Lead and Lead (Pb)-free Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TLCC20AE1002BUF T T L C C 2 0 L C C T 1 6 GLOBAL MODEL (4 or 5 digits) A A 0 TERMINAL COUNT (1) SCHEMATICS (4 or 5 digits) TCR CHARACTERISTICS LCC (Tin lead) 20 LCCT (Lead (Pb)-free) (e1) 20 A = Isolated resistors B = Resistor to common bus E = 25 ppm/°C H = 50 ppm/°C K = 100 ppm/°C M = 300 ppm/°C TLCC (Tin lead) 16 20 24 TLCCT (Lead (Pb)-free) (e1) 16 20 24 1 E 1 0 0 2 B U F K 1 0 0 3 K U F RESISTANCE TOLERANCE PACKAGING First 3 digits are significant figures and the last digit specifies the number of zeros to follow. B = 0.1 % D = 0.5 % F = 1 % G = 2 % J = 5 % K = 10 % S = Special TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2000 TS = 100 min., 1 mult Example: 10R0 = 10 12R5 = 12.5 1000 = 100 1001 = 1000 A01 = Resistor to common bus A03 = Isolated parallel resistor A06 = Isolated adjacent resistor UF = TUBED Historical Part Number example: LC20BK1003J (for reference purposes only) LC 20 B K 1003 J SERIES PINS SCHEMATIC TCR CHARACTERISTIC RESISTANCE TOLERANCE Note (1) LCC or LCCT only available in 20 pin size. Revision: 14-Jul-16 Document Number: 60012 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000