Vishay ERC Thick film planar resistors, through-hole, radial lead, high voltage Datasheet

FHV Radial
www.vishay.com
Vishay Techno
Thick Film Planar Resistors, Through-Hole,
Radial Lead, High Voltage
FEATURES
• Non-inductive design
• Matched sets available
• Ratio dividers available, see Vishay Techno’s
TR, TD datasheet
• Special testing available
• Low TCR:
± 200 ppm/°C standard,
± 100 ppm/°C available
• Tolerance: ± 10 %, ± 5 %, ± 2 %, ± 1 %
standard
• Tolerance and/or TCR matching available upon request
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL SPECIFICATIONS
Terminal Strength: 5 pound pull test
Solderability: Continuous satisfactory coverage when
tested in accordance with MIL-R-10509
MATERIAL SPECIFICATIONS
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
Element: High temperature fired cermet film
Core: High purity 96 % alumina
Coating: Conformal coat epoxy
Termination: Standard lead material is tin plated copper
TEMPERATURE COEFFICIENT CODE
CODE
K
N
TEMPERATURE COEFFICIENT
± 100 ppm/°C
± 200 ppm/°C
RANGE
- 55 °C to + 125 °C
- 55 °C to + 125 °C
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL / SIZE
FHV025
POWER RATING
P125 °C
P70 °C
W
W
0.25
0.125
MAXIMUM WORKING
VOLTAGE (1)
V
RESISTANCE
RANGE (2)

TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
750
10K to 100M
10K to 100M
10K to 500M
500 to 500M
100 to 1G
500 to 1G
100 to 1G
1.1G to 2G
1M to 1G
10K to 1G
1.1G to 2G
500 to 1G
100 to 1G
1.1G to 2G
500M to 1G
200 to 1G
1.1G to 8G
1M to 1G
20K to 1G
1.1G to 2G
1M to 1G
30K to 1G
1.1G to 10G
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
5, 10
1, 2, 5, 10
1, 2, 5, 10
5, 10
1, 2, 5, 10
1, 2, 5, 10
5, 10
1, 2, 5, 10
1, 2, 5, 10
5, 10
1, 2, 5, 10
1, 2, 5, 10
5, 10
1, 2, 5, 10
1, 2, 5, 10
5, 10
100, 200
100
200
100
200
100
200
200
100
200
200
100
200
200
100
200
200
100
200
200
100
200
200
FHV050
0.50
0.25
1.5K
FHV075
0.25
0.125
3.75K
FHV100
1
0.50
7.5K
FHV150
1.5
0.75
11.25K
FHV160
1
0.50
3.5K
FHV200
2
1
15K
FHV400
2
1
7.5K
FHV500
4
2
15K
Notes
(1) Continuous working voltage shall be
P x R or maximum working voltage, whichever is less.
(2) All resistance values are calibrated at 100 V . Calibration at other voltages upon request.
DC
Revision: 03-May-13
Document Number: 68001
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FHV Radial
www.vishay.com
Vishay Techno
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FHV02510K0FNEB (preferred part number format)
F
H
GLOBAL
MODEL
FHV
V
0
2
5
1
0
K
0
F
N
E
B
SIZE
RESISTANCE VALUE
TOLERANCE
TCR
TERMINAL FINISH
PACKAGING
025
050
075
100
150
160
200
400
500
R=
K = k
M = M
G = G
400R = 400 
10M0 = 10 M
10G0 = 10 G
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
K = 100 ppm
N = 200 ppm
E = Sn100
R = Sn60/Pb40
B = Bag
S = Strip
Historical Part Numbering: FHV0251002FMe3 (will continue to be accepted)
FHV
025
1002
F
M
e3
HISTORICAL MODEL
SIZE
RESISTANCE VALUE
TOLERANCE
TCR
TERMINAL FINISH
Note
• For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).
DIMENSIONS in inches (millimeters)
Figure 2
Figure 1
B
0.125 (3.18)
max.
B
0.125 (3.18)
max.
A
A
0.080 (2.03)
Ref.
0.050 (1.27)
Ref.
± 0.002 E
(0.051)
C
A (max.) (Height)
C
± 0.032
(0.813)
E 0.010 (0.25)
B (max.) (Length) C (Lead Spacing)
E ± 0.002 (0.051)
Dia.
D (Lead Length)
E (Lead DIA)
FIGURE
FHV025
0.300 (7.62)
0.300 (7.62)
0.200 (5.08)
0.250 (6.35)
0.018 (0.457)
1
FHV050
0.380 (9.65)
0.380 (9.65)
0.200 (5.08)
0.360 (9.14)
0.020 (0.508)
1
FHV075
0.210 (5.33)
0.570 (14.48)
0.400 (10.16)
1.50 (38.10)
0.025 (0.635)
2
FHV100
0.280 (7.11)
1.07 (27.18)
0.900 (22.86)
1.50 (38.10)
0.032 (0.813)
2
FHV150
0.330 (8.38)
1.57 (39.88)
1.40 (35.56)
1.50 (38.10)
0.032 (0.813)
2
FHV160
0.550 (13.97)
0.550 (13.97)
0.400 (10.16)
1.50 (38.10)
0.032 (0.813)
2
FHV200
0.330 (8.38)
2.04 (51.82)
1.90 (48.26)
1.50 (38.10)
0.032 (0.813)
2
FHV400
0.550 (13.97)
1.05 (26.67)
0.900 (22.86)
1.50 (38.10)
0.032 (0.813)
2
FHV500
0.550 (13.97)
2.07 (52.58)
1.90 (48.26)
1.50 (38.10)
0.032 (0.813)
2
ENVIRONMENTAL PERFORMANCE
TEST
MAXIMUM R (Typical
Test Lots)
Short time overload
< ± 0.2 %
Moisture resistance
< ± 0.5 %
Shock
< ± 0.2 %
Vibration
< ± 0.2 %
Temperature cycling
< ± 0.5 %
Load life
< ± 1.0 %
Dielectric withstanding voltage
< ± 0.15 %
Resistance to soldering heat
< ± 0.1 %
Revision: 03-May-13
DERATING
% OF RATED POWER
MODEL - SIZE
± 0.100
D (2.54)
D ± 0.100
(2.54)
100
80
60
40
20
0
25
75
125
175
225
275
AMBIENT TEMPERATURE IN °C
Document Number: 68001
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FHV Radial
www.vishay.com
Vishay Techno
AVERAGE
VOLTAGE COEFFICIENT ppm/V
VOLTAGE COEFFICIENT
0
-5
- 10
- 15
106
107
108 025
RESISTANCE ()
Revision: 03-May-13
109
050
1010
160
400
100
200
150
500
Document Number: 68001
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages