LIGHT S2D2 MODULE SOURCE L10671D, L10671P, L10671H OVERVIEW The S2D2 compact deuterium lamp is a UV point light source with a drastically reduced size compared to ordinary deuterium lamps. Despite a compact body, the S2D2 lamp has the same high stability as conventional deuterium lamps and a unique electrode structure that delivers high luminance. This compact size of the S2D2 module makes it easy to install in all types of equipment. The dedicated lamp housing and power supply are designed to extract maximum performance from the S2D2 lamp. FEATURES * By our research (as of March 2010) LIGHT OUTPUT STABILITY ●at 230 nm * Lamp housing is supplied with attached cover. ●Spectrophotometry ●Environmental Measurement ●Absorption Spectrum Measurement ●Micro Titer Plate Reader ●Pharmaceutical Testing ●High-Performance Liquid Chromatography ●Film Thickness Measurement ●Biological Measurement ●Semiconductor Inspection ●Optical Component Inspection SPECTRAL DISTRIBUTION (TYPICAL DATA) RADIANT INTENSITY (µW·cm-2·nm-1) at 50 cm TLSOB0110EA 15 ABSORBANCE (10-5 A.U.) S2D2 Lamp L10671D APPLICATIONS ●World* smallest deuterium lamp as point light source ●Easy installation due to compact size. ●High Stability: Fluctuation 0.005 % p-p (Typ.) (Equivalent to 2 × 10-5 A.U.) ●External Control ●High-output continuous spectrum in UV region ●Low power consumption 20 Power Supply for S2D2 Lamp L10671P Lamp Housing for S2D2 Lamp L10671H 10 5 0 -5 -10 -15 -20 TIME (100 s/div.) 0.010 TLSOB0109EB 0.009 0.008 0.007 0.006 0.005 0.004 0.003 0.002 0.001 0.000 200 220 240 260 280 300 320 WAVELENGTH (nm) 340 360 380 400 SPECIFICATIONS S2D2 Lamp (L10671D) Parameter Description / Value UV glass 185 to 400 1.0 ±0.25 0.005 1500 8.6 185 0 to +40 -10 to +60 Below 80 % (no condensation) Below 85 % (no condensation) Window Material Spectral Distribution Aperture Diameter Output Stability at 230 nm Drift Max. Fluctuation (p-p) Typ. Guaranteed Life at 230 nm 1 Weight Bulb Wall Temperature 2 Operation Ambient Temperature 3 Storage Temperature Operation Ambient Humidity Storage Humidity Max. Unit — nm mm %/h % h g °C °C °C — — 1Life end is defined as the time when the light output intensity at 230 nm falls to 50 % of its initial value or when output fluctuations exceed 0.05 % (p-p). 2Point A in L10671D drawing 3Ambient temperature in open area Power Supply for S2D2 Lamp (L10671P) Parameter Input Voltage (DC) Power Consumption Max. With Load Output Voltage (DC) Without Load Output Current (DC) Warm-up Time D2 Lamp Output Trigger Voltage (DC) (CN3) Voltage (DC) Warm-up Current (DC) Filament Time Ratings Voltage (DC) Operating Current (DC) Output Voltage (DC) CN4 Output Output Current (DC) Max. Output Voltage (DC) (±) 4 CN5 Output Output Current (DC) (±) Max. Output Voltage (DC) CN9 Output Max. Output Current (DC) Weight Operation Ambient Temperature Storage Temperature Operation Ambient Humidity Storage Humidity Conformance Standards External Control Description / Value 8.5 to 13.2 10 Approx. 135 Approx. 250 30 ± 2 25 ± 5 Approx. 250 4.2 ± 0.2 Approx. 0.6 25 ± 5 3.5 ± 0.2 Approx. 0.5 5 ± 0.2 0.15 5 ± 0.2 0.5 12 ± 0.5 0.2 42.3 0 to +40 -10 to +60 Below 80 % (no condensation) Below 85 % (no condensation) CE Marking Lamp ON / OFF CN4 Output ON / OFF CN5 Output ON / OFF Status signal for lamp ON / OFF, CN4 Output and Main power ON / OFF Unit V VA V V mA s V V A s V A V A V A V A g °C °C — — — — 4Alternately outputs +5 V and -5 V at 200 msec intervals whenever a signal is input across external control terminals 3 and 10. Lamp Housing for S2D2 Lamp (L10671H) Parameter Weight Optimum Operation Temperature 5 Storage Temperature Operation Ambient Humidity Storage Humidity Description / Value 320 +40 to +80 -10 to +60 Below 80 % (no condensation) Below 85 % (no condensation) Unit g °C °C — — 5Point B in L10671H drawing (Before installing this module in equipment, take the heat ratings into account, so the operating temperature will be within this temperature range.) DIMENSIONAL OUTLINES (Unit: mm) ●S2D2 Lamp (L10671D) ●Lamp Housing for S2D2 Lamp (L10671H) 130 TEMPERATURE MEASUREMENT POINT B EMISSION POINT POSITION TOLERANCE (CENTER) · With Respect To Axis Line A: ±0.3 mm · With Respect To Axis Line B: ±0.3 mm TEMPERATURE MEASUREMENT POINT A 2.5 12 LIGHT OUTPUT 8 MAX. 9- 0.7 36° ARC POINT 36° PCD10.72 ± 0.2 7 8 10° 1 9 36° 36° 28 5 FRONT VIEW 6 ARC POINT SIDE VIEW 2- 2.7 FOR M2.6 FLATHEAD SCREW 9- 0.7 13 ●CONNECTION 1: FILAMENT 3 (7): ANODE 5: AUXILIARY ELECTRODE 9: GND 2, 4, 6, 8: N.C. B BOTTOM VIEW TLSOA0109EA CN1: JACK FOR DC INPUT VOLTAGE 27 30 CN3: CONNECTOR FOR S2D2 LAMP OUTPUT 1: GND 2: FILAMENT 3: N.C. 4: AUXILIARY ELECTRODE 5: ANODE 3 20 18 MAX. 9.2 TOP VIEW TLS A0006EA CN5: CONNECTOR FOR ±5 V OUTPUT (Usage example: Shutter Solenoid) 1: + 2: N.C. 3: – 17 55 2-M2.6 DEPTH 2 (Screw holes for mounting) CN4: CONNECTOR FOR 5 V OUTPUT (Usage example: Tungsten Lamp) 1: + 2: – 3 65 8 2.5 MAX. 32.5 MAX. CN2: EXTERNAL CONTROL CONNECTOR 1: S2D2 LAMP ON / OFF 2: CN4 (5 V) OUTPUT ON / OFF 3: CN5 (±5 V) OUTPUT ON / OFF 4: S2D2 LAMP STATUS SIGNAL 5: CN4 (5 V) OUTPUT STATUS SIGNAL 6: MAIN POWER INPUT STATUS SIGNAL 7: N.C. 8: N.C. 9: N.C. 10: GND 3- 3 (MOUNTING HOLE) 3 3 ●Power Supply for S2D2 Lamp (L10671P) CN9: CONNECTOR FOR 12 V 1: + 2: – M11 × 0.5 (DEPTH 3.75) * * 10 mm dia. lens can be placed. A 10° 18 ° 18° 6 CONNECTOR FOR CONNECTION TO L10671P 13 5 4 3 2 7.5 5 6 14 6 29 7.5 37.5 19 20.5 MAX. ARC POINT SCREWS FOR LAMP CHANGE TOP VIEW 26 9.2 22 MAX. TOP VIEW (Bottom Board Only) BOARD = 1.2 mm SIDE VIEW TLS A0005EA DIRECTIVITY (LIGHT DISTRIBUTION) ●X Direction ●Y Direction RELATIVE IRRADIANCE 100 % RELATIVE IRRADIANCE 100 % 80 % 80 % 60 % 60 % 40 % 40 % 20° 10° 0° 20° 10° ANGLE -10° 0° ANGLE -10° -20° -20° TLS B0005EA TLS B0006EA USAGE EXAMPLE ●Assembly Example ●Installation Example Tungsten Lamp Fiber Connector Power Supply Shutter (Solenoid) Cooling Fan L10671P L10671D L10671H Mirror DETECTOR S2D2 Lamp PC BOARD Cooling Fan ●Customized Example * * We also accept orders for custom products to meet special needs. Feel free to contact us as needed. RELATED PRODUCTS COMPACT UV-VIS S2D2 FIBER LIGHT SOURCE L10671 S2D2 VUV LIGHT SOURCE UNIT L10706 Left: Light Source, Right: Power Supply Light guide is sold separately The L10671 is the compact UV-VIS fiber light source using a S2D2 (Stable and Small Deuterium) lamp. The L10671 is the light source that offers high radiant power and high stability despite its compact size. Besides being compact and easy to carry, the L10671 operates on a low voltage. These features make the L10671 ideal for all types of portable devices requiring a UV-VIS light source. The S2D2 VUV light source unit is a vacuum ultraviolet light source unit that incorporates a compact deuterium lamp with an MgF2 window. This light source unit allows irradiating objects or samples at a very close distance, and can be installed and operated under depressurized conditions. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2013 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] TLS 1004E03 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, 27 Dongsanhuan Road North, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] MAY 2013 IP