DTA65 Series Single Output Up to 65 Watts AC/DC Desktop Adapter FEATURES ● High Reliability ● Universal AC Input ● 100% Hi-Pot Tested ● 100% BURN-IN Tested ● CEC and Energy Star Compliant ● AC Inlet: IEC-320-C6 or IEC-320-C8 ● Safety Approvals, EMC Compliance ● Short Circuit, Over Voltage, and Over Load Protected SPECIFICATIONS: DTA65 Series All specifications apply @ ±25°C ambient unless otherwise noted INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input Voltage Range………………….… 90 - 264VAC (Full Range) Operating Temperature……………………………….. 0°C to +40°C Input Frequency……………………………………………. 47 - 63Hz Storage Temperature………………………………… -10°C to+70°C Input Current (max)………… 2A (rms) @ 115VAC; 1A @ 264VAC Humidity…………………………………………………… 20% ~ 90% OUTPUT SPECIFICATIONS MTBF…. >80,000 hours at full load and 25°C ambient temperature Output Current……………………………………………… see table PHYSICAL SPECIFICATIONS Output Voltage……………………………………………… see table Weight…………………………………………… less than 350 grams Output Power……………………………………………….. see table Dimensions………………………….. 108(L) x 47.5(W) x 30 (H) mm Line Regulation………………………………………………….. < 1% AC Input……………. IEC 320-C8 (2pin) or IEC 320-C6 (3 pin) Inlet (see notes for suffix options) Ripple/Noise (20 MHz BW)……………………………….. see table Hold Up Time…………….. >10ms typical at full load and 115VAC SAFETY & EMC PROTECTION Safety Standards………………………………………….. UL60950-1 TUV EN60950-1 CB IEC 60950-1 CSA C22.2-No.60950-1 Short Circuit Protection………………………………. Auto-recovery Over Voltage Protection… ………………………….. Auto-recovery Over Load Protection………………………………… Auto-recovery GENERAL SPECIFICATIONS EMC Standards…………………………………………………….. CE FCC Class B CISPR22 Class B EN55022 Class B Efficiency…………………………… >80% @ full load and 115VAC No Load Power Consumption…….…………. <500mW at 115VAC Due to advances in technology, specifications subject to change without notice Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTA65 Series Single Output Up to 65 Watts AC/DC Desktop Adapter OUTPUT VOLTAGE / CURRENT RATING CHART Model Output Voltage Output Current Output Power Output Regulation Ripple & Noise CEC LPS DTA040A1Y05FX DTA060A1Y12FX DTA060A1Y15FX DTA065A1Y19FX DTA065A1Y24FX DTA065A1Y36FX DTA065A1Y48FX 5V 12V 15V 19V 24V 36V 48V 8A 5A 4A 3.4A 2.7A 1.8A 1.35A 40W 60W 60W 64.6W 64.8W 64.8W 64.8W 5% 5% 5% 3% 3% 3% 3% 240mVp-p 240mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p • • • • • • • • • • NOTES 1. The suffix X can be 0 for AC INLET: IEC 320-C8 (2PIN) or 1 for AC Inlet: IEC 320-C6 (3PIN). Contact Factory for ordering details. 2. Ripple and Noise is measured at 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic capacitor. MECHANICAL DRAWING Unit: inches [mm] Tolerance: ±0.5mm STANDARD OUTPUT CABLE 1. AWM 1185#18AWG 1C+SHIELDING, UL 80°C 300V VW-1, 1500mm. 2. AWM 2464#18AWG 3C+SHIELDING, UL 80°C 300V VW-1, 1000 mm. 3. Depends on customer’s requirements. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797