For more information, please visit the product page | For information on related products, view Dc Power Jacks date 12/10/2014 page 1 of 5 SERIES: EPSA 24W │ DESCRIPTION: AC-DC POWER SUPPLY up to 24 W power universal input (90~264 Vac) single regulated output from 12~24 V short circuit protections UL/cUL safety approvals level V efficiency custom designs available U • • • • • • • ED FEATURES output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) 2 24 150 V 1.6 24 150 V 1 24 240 V EPSA120200U 12 EPSA150160U 15 EPSA240100U 24 efficiency level 1. At full load, 100 ~ 240 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with 10 µF aluminum electrolytic and 0.1 µF ceramic capacitors. O PART NUMBER KEY N Notes: TI MODEL N RoHS IS C EPSA120200U - XX - SZ - CXX Base Number DC Plug Type Factory Designation D example of 12 Vdc, 2 A cui.com Reserved for Custom Configurations For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: EPSA 24W │ DESCRIPTION: AC-DC POWER SUPPLY date 12/10/2014 │ page 2 of 5 INPUT parameter conditions/description min 90 frequency 47 current at 115 Vac, full load, cold start at 230 Vac, full load, cold start inrush current1 leakage current no load power consumption Notes: 1. 24 V model, no damage at 230 Vac, cool start conditions/description min line regulation PROTECTIONS conditions/description short circuit protection output shut down and auto restart TI parameter parameter units 264 Vac Hz typ 0.8 A RMS 50 100 A A 0.25 mA 0.3 W max units ±1 % ±5 % N load regulation SAFETY & COMPLIANCE max 63 U OUTPUT parameter typ ED voltage conditions/description min input to output at 10 mA for 1 minute isolation resistance input to output at 500 Vdc safety approvals UL 60950-1 EMI/EMC FCC Class B RoHS compliant yes O N isolation voltage typ max units 3,000 4,242 Vac Vdc 100 MΩ ENVIRONMENTAL parameter operating temperature conditions/description min typ max units 0 40 °C -10 70 °C operating humidity 20 80 % storage humidity 10 90 % D IS C storage temperature cui.com For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: EPSA 24W │ DESCRIPTION: AC-DC POWER SUPPLY date 12/10/2014 │ page 3 of 5 MECHANICAL parameter conditions/description dimensions 3.150 x 2.110 x 1.378 (80 x 53.6 x 35 mm) typ max units inch fixed US ED input plug min MECHANICAL DRAWING D IS C DC CORD O N TI N U units: mm ŔıIJ cable length ijIJƲĴ ijįĹſĵįıŮŮ 59C ĸıƲIJı Ŕħŕ MODEL NO. CABLE GAUGE CORD LENGTH EPSA120200U 20 AWG 1,530 mm ±100 EPSA150160U1 20 AWG 1,530 mm ±100 EPSA240100U1 22 AWG 1,530 mm ±100 Note: cui.com 1. “P5P” models have 1,830 mm ± 100 cord length For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: EPSA 24W │ DESCRIPTION: AC-DC POWER SUPPLY date 12/10/2014 │ page 4 of 5 OUTPUT PLUG OPTIONS 14±0.5 ED ø3.5 +0/-0.1 ø3.5 +0/-0.1 3.5 mm Phono Plug 14±0.5 *Tip positive P1 P1R C Right Angle PXR B A O B N B A C C A B C Unit 5.5 2.1 9.5 mm P6/P6R 5.5 2.5 9.5 mm P7/P7R 3.5 1.35 9.5 mm P8/P8R 3.8 1.35 9.5 mm P9/P9R 3.8 1.05 9.5 mm A B C Unit TI Locking DC Plug EIAJ Plugs P5/P5R N Standard PX B A B A C A U Standard DC Plug P10 5.5 2.1 9.5 mm P11 5.5 2.5 9.5 mm EIAJ A B C D Unit P12/P12R EIAJ-1 2.35 0.7 9.5 NA mm P13/P13R EIAJ-2 4.0 1.7 9.5 5.0 mm P14/P14R EIAJ-3 4.75 1.7 9.5 5.0 mm IS C C Standard PXX Right Angle PXXR D Stripped and Tinned 25±5 9±2 D DC PLUG TYPE ST Stripped and Tinned PXX X X Plug Type Plug Angle: “Blank” = Standard R = Right Angle *Contact CUI for additional output plug options. cui.com Plug Polarity: “Blank” = N/A P = Center Positive N = Center Negative For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: EPSA 24W │ DESCRIPTION: AC-DC POWER SUPPLY date 12/10/2014 │ page 5 of 5 REVISION HISTORY rev. description date 02/01/2010 initial release updated output plug options 1.02 updated inrush current, protection data, and output plug options 07/06/2011 1.03 new template applied 01/27/2012 ED 1.0 1.01 06/21/2010 1.04 updated P7/P7R B dimension 1.05 V-Infinity branding removed, EMI/EMC data updated 03/15/2012 1.06 CE data removed 1.07 updated datasheet 08/21/2012 U 05/15/2013 12/10/2014 D IS C O N TI N The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.