TI1 LPV324PW General-purpose, low-voltage, low-power, rail-to-rail output operational amplifier Datasheet

Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
D
D
D
D
D
D
D
D
D
D
D
2.7-V and 5-V Performance
−40°C to 125°C Specification at 5 V
No Crossover Distortion
Gain Bandwith of 152 kHz
Low Supply Current
− LPV321 . . . 9 μA
− LPV358 . . . 15 μA
− LPV324 . . . 28 μA
Rail-to-Rail Output Swing at 100-kΩ Load
− VCC+ − 3.5 mV
− VCC− + 90 mV
VICR . . . −0.2 V to VCC+ − 0.8 V
Stable With Capacitive Load of 1000 pF
Applications
− Active Filters
− General-Purpose, Low-Voltage
Applications
− Low-Power and/or Portable Applications
Latch-Up Performance Exceeds 100 mA per
JESD 78, Class II
ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
− 1000-V Charged-Device Model (C101)
LPV321 . . . DBV OR DCK PACKAGE
(TOP VIEW)
1
IN+
VCC−
IN−
5
VCC+
4
OUTPUT
2
3
LPV358 . . . D, DDU, OR DGK PACKAGE
(TOP VIEW)
1OUT
1IN−
1IN+
VCC−
1
8
2
7
3
6
4
5
VCC+
2OUT
2IN−
2IN+
LPV324 . . . D OR PW PACKAGE
(TOP VIEW)
1OUT
1IN−
1IN+
VCC+
2IN+
2IN−
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN−
4IN+
VCC−
3IN+
3IN−
3OUT
description/ordering information
The LPV321/358/324 devices are low-power (9 μA per channel at 5 V) versions of the LMV321/358/324
operational amplifiers. These are additions to the LMV321/358/324 family of commodity operational amplifiers.
The LPV321/358/324 devices are the most cost-effective solutions for applications where low voltage,
low-power operation, space saving, and low price are needed. These devices have rail-to-rail output-swing
capability, and the input common-mode voltage range includes ground. They all exhibit excellent speed-power
ratios, achieving 152 kHz of bandwidth, with a supply current of only 9 μA typical.
The LPV321, LPV358, and LPV324 are characterized for operation from −40°C to 85°C. The LPV321I,
LPV358I, and LPV324I are characterized for operation from −40°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright © 2005, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
description/ordering information (continued)
ORDERING INFORMATION
ORDERABLE
PART NUMBER
PACKAGE†
TA
SOT23 5 (DBV)
SOT23-5
Single
SC 70 (DCK)
SC-70
SOIC 8 (D)
SOIC-8
−40°C to 85°C
Dual
VSSOP-8 (DDU)
VSSOP 8 (DGK)
VSSOP-8
SOIC 14 (D)
SOIC-14
Quad
TSSOP 14 (PW)
TSSOP-14
SOT23 5 (DBV)
SOT23-5
Single
SC 70 (DCK)
SC-70
SOIC 8 (D)
SOIC-8
−40°C to 125°C
Dual
VSSOP-8 (DDU)
VSSOP 8 (DGK)
VSSOP-8
SOIC 14 (D)
SOIC-14
Quad
TSSOP 14 (PW)
TSSOP-14
TOP-SIDE
MARKING
Reel of 3000
LPV321DBVR
5C7_
Reel of 250
LPV321DBVT
PREVIEW
Reel of 3000
LPV321DCKR
52_
Reel of 250
LPV321DCKT
PREVIEW
Tube of 75
LPV358D
Reel of 2500
LPV358DR
Reel of 3000
LPV358DDUR
5A56
Reel of 2500
LPV358DGKR
546
Reel of 250
LPV358DGKT
PREVIEW
Tube of 50
LPV324D
Reel of 2500
LPV324DR
Tube of 90
LPV324PW
Reel of 2000
LPV324PWR
Reel of 3000
LPV321IDBVR
5C1_
Reel of 250
LPV321IDBVT
PREVIEW
Reel of 3000
LPV321IDCKR
53_
Reel of 250
LPV321IDCKT
PREVIEW
Tube of 75
LPV358ID
Reel of 2500
LPV358IDR
Reel of 3000
LPV358IDDUR
5AE6
Reel of 2500
LPV358IDGKR
556
Reel of 250
LPV358IDGKT
PREVIEW
Tube of 50
LPV324ID
Reel of 2500
LPV324IDR
Tube of 90
LPV324IPW
Reel of 2000
LPV324IPWR
†
PV358
LPV324
PV324
PV358I
LPV324I
PV324I
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
‡ DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
symbol (each amplifier)
−
IN−
OUT
2
+
IN+
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
LPV324 simplified schematic
VCC
VBIAS1
+
VCC
−
VBIAS2
+
Output
−
VCC VCC
VBIAS3
+
IN−
IN+
VBIAS4−
+
−
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC+ − VCC− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VCC
Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC− to VCC+ − 1 V
Package thermal impedance, θJA (see Notes 3 and 4): 5-pin DBV package . . . . . . . . . . . . . . . . . . . 206°C/W
5-pin DCK package . . . . . . . . . . . . . . . . . . . 252°C/W
8-pin D package . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
8-pin DDU package . . . . . . . . . . . . . . . . . . TBD°C/W
8-pin DGK package . . . . . . . . . . . . . . . . . . . 172°C/W
14-pin D package . . . . . . . . . . . . . . . . . . . . . . 86°C/W
14-pin PW package . . . . . . . . . . . . . . . . . . . 113°C/W
Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages and VCC specified for the measurement of IOS, are with respect to the network GND.
2. Differential voltages are at IN+ with respect to IN−.
3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability.
4. The package thermal impedance is calculated in accordance with JESD 51-7.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
recommended operating conditions
MIN
VCC
TA
Supply voltage
free air temperature
Operating free-air
MAX
2.7
5
LPV3xx
−40
85
LPV3xxI
−40
125
UNIT
V
°C
ESD protection
TEST CONDITIONS
Human-Body Model
Machine model
Charged-Device Model
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TYP
UNIT
2
kV
200
V
1
kV
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
2.7-V electrical characteristics
TA = 25°C, VCC+ = 2.7 V, VCC− = 0 V, VIC = 1 V, VO = VCC+/2, and RL > 1 MΩ (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
MIN
TYP†
MAX
1.2
7
UNIT
VIO
Input offset voltage
αVIO
Average temperature
coefficient of
input offset voltage
IIB
Input bias current
1.7
50
nA
IIO
Input offset current
0.6
40
nA
CMRR
Common-mode
rejection ratio
0 ≤ VIC ≤ 1.7 V
50
70
dB
kSVR
Supply-voltage
rejection ratio
2.7 V ≤ VCC+ ≤ 5 V, VIC = 1 V, VO = 1 V
50
65
dB
VICR
Common-mode
input voltage range
CMRR ≥ 50 dB
0 to 1.7
−0.2 to 1.9
V
VO
Output swing
RL = 100 kΩ to 1
1.35
35 V
VCC+ − 0.100
VCC+ − 0.003
Low level
LPV321
ICC
Supply current
mV/°C
4
High level
LPV358 (both amplifiers)
LPV324 (all four amplifiers)
0.080
mV
0.180
4
8
8
16
16
24
V
mA
SR
Slew rate‡
0.1
V/ms
GBW
Gain bandwidth product
CL = 22 pF (see Note 5)
205
kHz
Fm
Phase margin
CL = 22 pF (see Note 5)
71
deg
Gain margin
CL = 22 pF (see Note 5)
11
dB
Vn
Equivalent input
noise voltage
f = 1 kHz
178
nV/√Hz
In
Equivalent input
noise current
f = 1 kHz
0.5
pA/√Hz
†
All typical values are at VCC = 2.7 V, TA = 25°C.
Number specified is the slower of the positive and negative slew rates.
NOTE 5: Closed-loop gain = 18 dB, VIC = VCC+/2
‡
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
5-V electrical characteristics
TA = 25°C, VCC+ = 5 V, VCC− = 0 V, VIC = 2 V, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
MIN
25°C
VIO
Input offset voltage
TYP†
MAX
1.5
7
−40°C to 85°C
10
−40°C to 125°C
11
UNIT
mV
αVIO
Average temperature
coefficient of
input offset voltage
IIB
Input bias current
CMRR
Common-mode
rejection ratio
0 ≤ VIC ≤ 4 V
25°C
50
71
dB
kSVR
Supply-voltage
rejection ratio
2.7 V ≤ VCC+ ≤ 5 V,
VIC = 1 V, VO = 1 V
25°C
50
65
dB
VICR
Common-mode
input voltage range
CMRR ≥ 50 dB
25°C
0 to 4
25°C
4
25°C
2
Input offset current
High
Hi
h
level
VO
Output swing
RL = 100 kΩ to 2
5V
2.5
60
−40°C to 125°C
65
−0.2 to 4.2
0.6
−40°C to 125°C
55
25°C
VCC+ − 0.100
VCC+ − 0.200
−40°C to 125°C
VCC+ − 0.225
IOS
Output short-circuit
short circuit
current
Sinking, VO = 5 V
0.090
−40°C to 85°C
25°C
17
20
72
9
15
24
−40°C to 125°C
80
28
−40°C to 85°C
SR§
L
i
l
Large-signal
voltage gain
RL = 100 kΩ
Slew rate
15
−40°C to 85°C
10
−40°C to 125°C
10
25°C
100
V/mV
0.1
All typical values are at VCC = 5 V, TA = 25°C.
RL is connected to VCC−. The output voltage is 0.5 V ≤ VO ≤ 4.5 V.
§ Number specified is the slower of the positive and negative slew rates. Connected as a voltage follower with 3-V step input.
‡
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
42
125
25°C
†
mA
46
−40°C to 125°C
AV‡
20
−40°C to 85°C
25°C
LPV324 (all four amplifiers)
12
40
25°C
LPV358 (both amplifiers)
mA
15
−40°C to 125°C
Supply current
V
0.240
2
25°C
ICC
0.180
0.220
−40°C to 85°C
LPV321
nA
VCC+ − 0.0035
−40°C to 125°C
Sourcing, VO = 0 V
40
50
−40°C to 85°C
nA
V
−40°C to 85°C
25°C
Low
L
level
50
−40°C to 85°C
25°C
IIO
mV/°C
V/ms
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
5-V electrical characteristics
TA = 25°C, VCC+ = 5 V, VCC− = 0 V, VIC = 2 V, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
TA
MIN
TYP†
MAX
UNIT
GBW
Gain bandwidth product
CL = 22 pF (see Note 5)
25°C
237
kHz
Fm
Phase margin
CL = 22 pF (see Note 5)
25°C
74
deg
Gain margin
CL = 22 pF (see Note 5)
25°C
12
dB
Vn
Equivalent input noise voltage
f = 1 kHz
25°C
146
nV/√Hz
In
Equivalent input noise current
f = 1 kHz
25°C
0.3
pA/√Hz
†
All typical values are at VCC = 5 V, TA = 25°C.
NOTE 5: Closed-loop gain = 18 dB, VIC = VCC+/2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
(LPV324 − All Channels)
INPUT BIAS CURRENT
vs
TEMPERATURE
6
25
IB, IIB − Input Bias Current − nA
ICC − Supply Current − A
30
TA = 85C
TA = 40C
TA = 25C
20
15
10
5
1
2
3
4
5
VCC+ = 5 V
VIN = VCC+/2
4
3
2
1
0
−40
0
0
5
6
−20
0
VCC+ − Supply Voltage − V
SOURCING CURRENT
vs
OUTPUT VOLTAGE
80
100
1K
100
100
IO − Source Current − mA
IO − Source Current − mA
60
SOURCING CURRENT
vs
OUTPUT VOLTAGE
1K
VCC+ = 2.7 V
10
1
0.1
0.01
0.01
0.1
1
10
VCC+ = 5 V
10
1
0.1
0.01
0.001
0.001
Output Voltage Referenced to V+ − V
0.01
0.1
Figure 4
POST OFFICE BOX 655303
1
Output Voltage Referenced to V+ − V
Figure 3
8
40
Figure 2
Figure 1
0.001
0.001
20
TA − Temperature − C
• DALLAS, TEXAS 75265
10
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
SINKING CURRENT
vs
OUTPUT VOLTAGE
SINKING CURRENT
vs
OUTPUT VOLTAGE
1k
1k
VCC+ = 5 V
100
VCC+ = 2.7 V
IO − Sink Current − mA
IO − Sink Current − mA
100
10
1
0.1
10
1
0.1
0.01
0.01
0.001
0.001
0.01
0.1
1
0.001
0.001
10
Output Voltage Referenced to GND − V
Figure 5
RL = 10 kΩ
180
Negative Swing
RL = 100 kΩ
140
120
100
80
Positive Swing
RL = 10 kΩ
40
20
Input Voltage Noise − nV/Hz
Output Voltage From Supply Voltage − mV
10
220
Rl Terminated to Opposing Supply Rail
200
60
1
INPUT VOLTAGE NOISE
vs
FREQUENCY
240
160
0.1
Figure 6
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
220
0.01
Output Voltage Referenced to GND − V
200
VCC+ = 2.7 V
180
160
VCC+ = 5 V
140
120
RL = 100 kΩ
0
2.5
3
3.5
4
4.5
5
5.5
100
10
100
VCC+ − Supply Voltage − V
Frequency − Hz
Figure 7
Figure 8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1k
9
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
INPUT CURRENT NOISE
vs
FREQUENCY
CROSSTALK REJECTION
vs
FREQUENCY
140
0.40
130
VCC+ = 2.7 V
Crosstalk Rejection − dB
0.30
0.25
0.20
VCC+ = 5 V
0.15
0.10
0.05
120
110
100
90
80
70
VCC+ = 5 V
RL = 100 k
AV = 1
VI = 3 VPP
60
50
0.00
10
100
1k
40
100
10k
1k
Frequency − Hz
10k
Figure 9
Figure 10
PSRR
vs
FREQUENCY
FREQUENCY
vs
RL
85
180
40
VCC+ = 5 V,
+PSRR
75
RL = 10 kΩ
65
VCC+ = 2.7 V
RL = 10 kΩ
RL = 100 kΩ
Phase
30
VCC+ = 2.7 V,
+PSRR
25
Gain
80
10
60
40
VCC+ = −2.7 V,
−PSRR
0
20
−5
−15
100
0
1k
10k
100k
1M
−10
1k
Frequency − Hz
10k
100k
Frequency − Hz
Figure 11
10
140
100
20
15
5
160
120
VCC+ = −5 V,
−PSRR
45
Gain − dB
PSRR − dB
55
35
100k
Frequency − Hz
Figure 12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1M
−20
10M
Phase Margin − Deg
Input Current Noise − pA/Hz
0.35
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
FREQUENCY
vs
RL
FREQUENCY RESPONSE
vs
CL
140
Gain
VCC+ = 5 V
RL = 10 kΩ
RL = 100 kΩ
80
60
40
0
Gain − dB
100
20
20
100k
20
CL = 22 pF
CL = 200 pF
CL = 1,000 pF
1k
SLEW RATE
vs
SUPPLY VOLTAGE
0.13
100
0.12
80
0.11
60
Gain
40
20
20
0
10
−20
VCC+ = 5.0 V
CL = 22 pF
CL = 200 pF
CL = 1,000 pF
100k
Slew Rate − V/s
120
Phase Margin − Deg
30
Gain − dB
−60
10M
1M
Figure 14
FREQUENCY RESPONSE
vs
CL
10k
100k
Frequency − Hz
Phase
−10
1k
−40
10k
Figure 13
0
−20
−10
1M
Frequency − Hz
40
80
40
10
0
−20
10k
100
60
Gain
0
1k
120
0
20
−10
CL = 22 pF
CL = 200 pF
CL = 1000 pF
30
Phase Margin − Deg
Gain − dB
120
VCC+ = 2.7 V
Phase
160
Phase
30
10
140
40
Phase Margin − Deg
180
40
0.1
0.09
0.08
Falling Edge
0.07
0.06
−40
0.05
−60
0.04
−80
1M
Positive Edge
Open Loop
VID = 100 mV
VCC+ = 5 V
0.03
2.5
3
3.5
4
4.5
5
5.5
VCC − Supply Voltage − V
Frequency − Hz
Figure 16
Figure 15
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
Not Recommended for New Designs
LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD
GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005
NONINVERTING SMALL-SIGNAL PULSE RESPONSE
NONINVERTING LARGE-SIGNAL PULSE RESPONSE
0.16
Input − 20 mV/Div
Input − 1 V/Div
4
3
TA = 25°C
RL = 10 kΩ
VCC = 5 V/0 V
AV = 1
2
1
0
0.12
0.08
0.04
VI = 100 mV/0 V
0
−1
100 s/Div
−0.04
0.16
Output − 20 mV/Div
Output − 1 V/Div
4
100 s/Div
3
2
TA = 25°C
RL = 10 kΩ
VCC = 5 V/0 V
AV = 1
1
0
0.12
0.08
TA = 25°C
VCC+ = 5 V/0 V
RL = 10 kΩ
AV = 1
0.04
0
−1
100 s/Div
100 s/Div
Figure 18
Figure 17
INVERTING LARGE-SIGNAL PULSE RESPONSE
INVERTING SMALL-SIGNAL PULSE RESPONSE
Input − 20 mV/Div
Input − 1 V/Div
6
4
2
0
−2
TA = 25°C
0.08
0.04
0
−0.04
−0.08
−4
100 s/Div
TA = 25°C
RL = 10 kΩ
VCC+ = 5 V
AV = −5
Rf = 10 kΩ
Ri = 2 kΩ
0
−2
−4
Output − 20 mV/Div
Output − 1 V/Div
2
0.16
0.12
AV = −5
Rf = 10 kΩ
Ri = 2 kΩ
0.04
0
100 s/Div
TA = 25°C
RL = 10 kΩ
VCC+ = 5 V
0.08
100 s/Div
Figure 20
Figure 19
12
100 s/Div
0.20
6
4
TA = 25 C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jun-2014
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
(4/5)
LPV321DBVR
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
-40 to 85
LPV321DBVRE4
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
-40 to 85
LPV321DBVRG4
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
-40 to 85
LPV321DCKR
OBSOLETE
SC70
DCK
5
TBD
Call TI
Call TI
-40 to 85
-40 to 85
LPV321DCKRE4
OBSOLETE
SC70
DCK
5
TBD
Call TI
Call TI
LPV321DCKRG4
OBSOLETE
SC70
DCK
5
TBD
Call TI
Call TI
-40 to 85
LPV321IDBVR
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
-40 to 125
LPV321IDBVRE4
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
-40 to 125
LPV321IDBVRG4
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
-40 to 125
LPV321IDCKR
OBSOLETE
SC70
DCK
5
TBD
Call TI
Call TI
-40 to 125
LPV321IDCKRE4
OBSOLETE
SC70
DCK
5
TBD
Call TI
Call TI
-40 to 125
LPV321IDCKRG4
OBSOLETE
SC70
DCK
5
TBD
Call TI
Call TI
-40 to 125
LPV324D
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 85
LPV324DE4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 85
LPV324DG4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 85
LPV324DR
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 85
LPV324DRE4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 85
LPV324DRG4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 85
LPV324ID
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LPV324IDE4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LPV324IDG4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LPV324IDR
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LPV324IDRE4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LPV324IDRG4
OBSOLETE
SOIC
D
14
TBD
Call TI
Call TI
-40 to 125
LPV324IPW
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LPV324IPWE4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LPV324IPWG4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LPV324IPWR
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LPV324IPWRE4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
LPV324IPWRG4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 125
Addendum-Page 1
Device Marking
(5C7B ~ 5C7I)
(52B ~ 52I)
(5C1B ~ 5C1I)
(53B ~ 53I)
LPV324
LPV324
LPV324I
LPV324I
PV324I
PV324I
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jun-2014
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LPV324PW
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
LPV324PWE4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
LPV324PWG4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
PV324
LPV324PWR
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
LPV324PWRE4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
LPV324PWRG4
OBSOLETE
TSSOP
PW
14
TBD
Call TI
Call TI
-40 to 85
LPV358D
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 85
PV358
LPV358DDUR
OBSOLETE
VSSOP
DDU
8
TBD
Call TI
Call TI
-40 to 85
5A56
LPV358DDURE4
OBSOLETE
VSSOP
DDU
8
TBD
Call TI
Call TI
-40 to 85
LPV358DDURG4
OBSOLETE
VSSOP
DDU
8
TBD
Call TI
Call TI
-40 to 85
LPV358DE4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 85
PV324
LPV358DG4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 85
LPV358DGKR
OBSOLETE
VSSOP
DGK
8
TBD
Call TI
Call TI
-40 to 85
LPV358DGKRG4
OBSOLETE
VSSOP
DGK
8
TBD
Call TI
Call TI
-40 to 85
LPV358DR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 85
LPV358DRE4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 85
LPV358DRG4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 85
LPV358ID
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 125
PV358I
LPV358IDDUR
OBSOLETE
VSSOP
DDU
8
TBD
Call TI
Call TI
-40 to 125
5AE6
LPV358IDDURE4
OBSOLETE
VSSOP
DDU
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDDURG4
OBSOLETE
VSSOP
DDU
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDE4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDG4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDGKR
OBSOLETE
VSSOP
DGK
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDGKRG4
OBSOLETE
VSSOP
DGK
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDR
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDRE4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 125
LPV358IDRG4
OBSOLETE
SOIC
D
8
TBD
Call TI
Call TI
-40 to 125
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
Addendum-Page 2
546
PV358
556
PV358I
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
2-Jun-2014
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated