To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. Renesas Technology Home Page: http://www.renesas.com Renesas Technology Corp. Customer Support Dept. April 1, 2003 Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. HM62W16258B Series 4 M SRAM (256-kword × 16-bit) ADE-203-976B (Z) Rev. 2.0 Oct. 14, 1999 Description The Hitachi HM62W16258B Series is 4-Mbit static RAM organized 262,144-word × 16-bit. HM62W16258B Series has realized higher density, higher performance and low power consumption by employing Hi-CMOS process technology. It offers low power standby power dissipation; therefore, it is suitable for battery backup systems. It is packaged in standard 44-pin plastic TSOPII. Features • • • • • • • Single 3.3 V supply: 3.3 V ± 0.3 V Fast access time: 55 ns/70 ns (max) Power dissipation: Active: 9.9 mW (typ) Standby: 3.3 µW (typ) Completely static memory. No clock or timing strobe required Equal access and cycle times Common data input and output. Three state output Battery backup operation. HM62W16258B Series Ordering Information Type No. Access time Package HM62W16258BLTT-5 HM62W16258BLTT-7 55 ns 70 ns 400-mil 44-pin plastic TSOPII (normal-bend type) (TTP-44DB) HM62W16258BLTT-5SL HM62W16258BLTT-7SL 55 ns 70 ns 2 HM62W16258B Series Pin Arrangement 44-pin TSOP A4 A3 A2 A1 A0 CS I/O0 I/O1 I/O2 I/O3 VCC VSS I/O4 I/O5 I/O6 I/O7 WE A17 A16 A15 A14 A13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A5 A6 A7 OE UB LB I/O15 I/O14 I/O13 I/O12 VSS VCC I/O11 I/O10 I/O9 I/O8 NC A8 A9 A10 A11 A12 (Top view) Pin Description Pin name Function A0 to A17 Address input I/O0 to I/O15 Data input/output CS Chip select WE Write enable OE Output enable LB Lower byte select UB Upper byte select VCC Power supply VSS Ground NC No connection 3 HM62W16258B Series Block Diagram LSB A4 V CC A3 V SS A15 A14 A16 A1 Row decoder • • • • • Memory matrix 2,048 x 2,048 A2 A17 MSB A0 A13 I/O0 Column I/O • • Input data control Column decoder I/O15 LSB A7 A6A5 A8 A9A10A11A12MSB • • CS LB UB WE OE 4 Control logic • • HM62W16258B Series Operation Table CS WE OE UB LB I/O0 to I/O7 I/O8 to I/O15 Operation H × × × × High-Z High-Z Standby × × × H H High-Z High-Z Standby L H L L L Dout Dout Read L H L H L Dout High-Z Lower byte read L H L L H High-Z Dout Upper byte read L L × L L Din Din write L L × H L Din High-Z Lower byte write L L × L H High-Z Din Upper byte write L H H × × High-Z High-Z Output disable Note: H: V IH, L: VIL, ×: VIH or VIL Absolute Maximum Ratings Parameter Symbol Value Power supply voltage relative to V SS VCC –0.5 to + 4.6 Unit V 1 2 Terminal voltage on any pin relative to V SS VT –0.5* to V CC + 0.3* V Power dissipation PT 1.0 W Storage temperature range Tstg –55 to +125 °C Storage temperature range under bias Tbias –10 to +85 °C Notes: 1. VT min: –3.0 V for pulse half-width ≤ 30 ns. 2. Maximum voltage is +4.6 V. DC Operating Conditions Parameter Symbol Min Typ Max Unit Supply voltage VCC 3.0 3.3 3.6 V VSS 0 0 0 V Input high voltage VIH 2.0 — VCC + 0.3 V Input low voltage VIL –0.3 — 0.8 V Ambient temperature range Ta 0 — 70 °C Note: Note 1 1. VIL min: –3.0 V for pulse half-width ≤ 30 ns. 5 HM62W16258B Series DC Characteristics Parameter Symbol Min Typ*1 Max Unit Test conditions Input leakage current |ILI| — — 1 µA Vin = VSS to V CC Output leakage current |ILO | — — 1 µA CS = VIH or OE = VIH or WE = VIL, or LB = UB =VIH ,, VI/O = VSS to V CC Operating current I CC — — 20 mA CS = VIL, Others = VIH/VIL, I I/O = 0 mA Average HM62W16258B-5 I CC1 operating current — — 80 mA Min. cycle, duty = 100%, I I/O = 0 mA, CS = VIL, Others = VIH/VIL HM62W16258B-7 I CC1 — — 70 mA I CC2 — 3 15 mA Cycle time = 1 µs, duty = 100%, I I/O = 0 mA, CS ≤ 0.2 V, V IH ≥ V CC – 0.2 V, VIL ≤ 0.2 V Standby current Standby current Output high voltage Output low voltage — — 0.3 mA CS = VIH 2 — 1 40 µA 0 V ≤ Vin CS ≥ V CC – 0.2 V I SB1*3 — 1 20 µA VOH 2.4 — — V I OH = –1 mA VCC – 0.2 — — V I OH = –100 µA — — 0.4 V I OL = 2 mA — — 0.2 V I OL = 100 µA I SB I SB1* VOL Notes: 1. Typical values are at VCC = 3.0 V, Ta = +25°C and not guaranteed. 2. This characteristic is guaranteed only for L-version. 3. This characteristic is guaranteed only for L-SL version. Capacitance (Ta = +25°C, f = 1.0 MHz) Parameter Symbol Min Typ Max Unit Test conditions Note Input capacitance Cin — — 8 pF Vin = 0 V 1 Input/output capacitance CI/O — — 10 pF VI/O = 0 V 1 Note: 6 1. This parameter is sampled and not 100% tested. HM62W16258B Series AC Characteristics (Ta = 0 to +70°C, VCC = 3.3 V ± 0.3 V, unless otherwise noted.) Test Conditions • • • • • Input pulse levels: VIL = 0.4 V, VIH = 2.4 V Input rise and fall time: 5 ns Input timing reference levels: 1.4 V Output timing reference levels: 1.4 V/1.4 V (HM62W16258B-5) : 2.0 V/0.8 V (HM62W16258B-7) Output load (Including scope and jig) , , , , ,,,, 500Ω Dout 50 pF Read Cycle 1.4 V HM62W16258B -5 -7 Parameter Symbol Min Max Min Max Unit Notes Read cycle time t RC 55 — 70 — ns Address access time t AA — 55 — 70 ns Chip select access time t ACS — 55 — 70 ns Output enable to output valid t OE — 35 — 40 ns Output hold from address change t OH 10 — 10 — ns LB, UB access time t BA — 55 — 70 ns Chip select to output in low-Z t CLZ 10 — 10 — ns 2, 3 LB, UB enable to low-z t BLZ 5 — 5 — ns 2, 3 Output enable to output in low-Z t OLZ 5 — 5 — ns 2, 3 Chip deselect to output in high-Z t CHZ 0 20 0 25 ns 1, 2, 3 LB, UB disable to high-Z t BHZ 0 20 0 25 ns 1, 2, 3 Output disable to output in high-Z t OHZ 0 20 0 25 ns 1, 2, 3 7 HM62W16258B Series Write Cycle HM62W16258B -5 -7 Parameter Symbol Min Max Min Max Unit Write cycle time t WC 55 — 70 — ns Address valid to end of write t AW 50 — 60 — ns Chip selection to end of write t CW 50 — 60 — ns 5 Write pulse width t WP 40 — 50 — ns 4 LB, UB valid to end of write t BW 50 — 55 — ns Address setup time t AS 0 — 0 — ns 6 Write recovery time t WR 0 — 0 — ns 7 Data to write time overlap t DW 25 — 30 — ns Data hold from write time t DH 0 — 0 — ns Output active from end of write t OW 5 — 5 — ns 2 Output disable to output in High-Z t OHZ 0 20 0 25 ns 1, 2 Write to output in high-Z 0 20 0 25 ns 1, 2 t WHZ Notes Notes: 1. t CHZ, tOHZ , t WHZ and tBHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referred to output voltage levels. 2. This parameter is sampled and not 100% tested. 3. At any given temperature and voltage condition, t HZ max is less than tLZ min both for a given device and from device to device. 4. A write occures during the overlap of a low CS, a low WE and a low LB or a low UB. A write begins at the latest transition among CS going low, WE going low and LB going low or UB going low. A write ends at the earliest transition among CS going high, WE going high and LB going high or UB going high. t WP is measured from the beginning of write to the end of write. 5. t CW is measured from the later of CS going low to the end of write. 6. t AS is measured from the address valid to the beginning of write. 7. t WR is measured from the earliest of CS or WE going high to the end of write cycle. 8 HM62W16258B Series Timing Waveform Read Cycle t RC Address Valid address tAA tACS CS tCLZ*2, 3 tCHZ*1, 2, 3 tBHZ*1, 2, 3 tBA LB, UB tBLZ*2, 3 tOHZ*1, 2, 3 tOE OE tOLZ*2, 3 Dout High impedance tOH Valid data 9 HM62W16258B Series Write Cycle (1) (WE Clock) tWC Valid address Address tWR*7 tCW*5 CS tBW LB, UB tAW tWP*4 WE tAS*6 tDW tDH Valid data Din tWHZ*1, 2 tOW*2 High impedance Dout 10 HM62W16258B Series Write Cycle (2) (CS Clock, OE = VIH) tWC Valid address Address tAW tAS*6 tWR*7 tCW*5 CS tBW LB, UB tWP*4 WE tDW tDH Valid data Din High impedance Dout 11 HM62W16258B Series Write Cycle (3) (LB, UB Clock, OE = VIH) tWC Valid address Address tAW tCW*5 tWR*7 CS tAS*6 tBW LB, UB tWP*4 WE tDW Valid data Din High impedance Dout 12 tDH HM62W16258B Series Low VCC Data Retention Characteristics (Ta = 0 to +70°C) Parameter Symbol Min Typ* 4 Max Unit Test conditions*3 VCC for data retention VDR 2.0 — — V Vin ≥ 0V (1) CS ≥ V CC – 0.2 V or (2) LB = UB ≥ V CC – 0.2 V CS ≤ 0.2 V Data retention current I CCDR*1 — 0.8 20 µA VCC = 3.0 V, Vin ≥ 0V (1) CS ≥ V CC – 0.2 V or (2) LB = UB ≥ V CC – 0.2 V CS ≤ 0.2 V I CCDR*2 — 0.8 10 µA Chip deselect to data retention time t CDR 0 — — ns Operation recovery time tR t RC*5 — — ns See retention waveform Notes: 1. This characteristic is guaranteed only for L-version, 10 µA max. at Ta = 0 to +40°C. 2. This characteristic is guaranteed only for L-SL version, 5 µA max. at Ta = 0 to +40°C. 3. CS controls address buffer, WE buffer, OE buffer, LB, UB buffer and Din buffer. If CS controls data retention mode, Vin levels (address, WE, OE, LB, UB, I/O) can be in the high impedance state. If LB, UB controls data retention mode, LB, UB must be LB = UB ≥ V CC – 0.2 V, CS must be CS ≤ 0.2 V. The other input levels (address, WE, OE, I/O) can be in the high impedance state. 4. Typical values are at VCC = 3.0 V, Ta = +25˚C and not guaranteed. 5. t RC = read cycle time. 13 HM62W16258B Series Low V CC Data Retention Timing Waveform (1) (CS Controlled) t CDR Data retention mode tR V CC 3.0 V V DR 2.0 V CS 0V CS ≥ VCC – 0.2 V Low V CC Data Retention Timing Waveform (2) (LB, UB Controlled) t CDR Data retention mode V CC 3.0 V V DR 2.0 V LB, UB 0V 14 LB, UB ≥ VCC – 0.2 V tR HM62W16258B Series Package Dimensions HM62W16258BLTT Series (TTP-44DB) Unit: mm 18.41 18.81 Max 23 10.16 44 1 0.80 22 0.80 0.30 ± 0.10 0.25 ± 0.05 0.13 M 11.76 ± 0.20 1.005 Max Dimension including the plating thickness Base material dimension 0.13 ± 0.05 0.10 0.17 ± 0.05 0.125 ± 0.04 1.20 Max 0° – 5° 0.50 ± 0.10 Hitachi Code JEDEC EIAJ Weight (reference value) TTP-44DB — — 0.43 g 15 HM62W16258B Series Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Straße 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright © Hitachi, Ltd., 1998. All rights reserved. Printed in Japan. 16