For more information, please visit the product page | For information on related products, view Dc Power Jacks date 05/08/2015 page 1 of 6 SERIES: ETSA 150W U │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • 150 W power universal input (90~264 Vac) single regulated outputs over voltage, over current, and short circuit protections UL/cUL safety approvals level VI efficiency power factor correction custom designs available MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) ETSA1201167U 12 11.67 140 240 VI ETSA160938U 16 9.38 150 320 VI ETSA190790U 19 7.90 150 380 VI ETSA240625U 24 6.25 150 480 VI ETSA360417U 36 4.17 150 480 VI ETSA480313U 48 3.13 150 480 VI Notes: efficiency level 1. Ripple and noise measured with 20 MHz bandwidth oscilloscope, each output terminated with 10 µF/50 V electrolytic and 0.1 µF ceramic capacitors. PART NUMBER KEY ETSA160938UX - P51 - WP - CXX Base Number example of 16 Vdc, 9.38 A DC Plug Type: Input Cable: 4 Pin Power DIN “Blank” = No Cable C = North America input cable 2 = Europe input cable 3 = United Kingdom input cable 4 = Australia input cable 5 = China input cable 6 = South Korea input cable 7 = Brazil input cable 8 = South Africa input cable 9 = Japan input cable cui.com Factory Designation Reserved for Custom Configurations For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: ETSA 150W U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/08/2015 │ page 2 of 6 INPUT parameter conditions/description min voltage typ 90 frequency 47 current at 90 Vac, 50 Hz inrush current at 230 Vac, cold start power factor correction at full load max units 264 Vac 63 Hz 2.5 A 150 A 0.15 W max units 0.9 no load power consumption OUTPUT parameter conditions/description regulation 12, 16, 19 Vdc output models 24, 36, 48 Vdc output models hold-up time at 115/230 Vac, full load min typ ±5 ±3 % % 16 ms temperature coefficient ±0.05 %/°C max units PROTECTIONS parameter conditions/description min typ over voltage protection output latch off 110 130 % over current protection output shut down, auto recovery 110 160 % short circuit protection output shut down, auto recovery max units SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output for 4 seconds input to frame ground for 4 seconds isolation resistance input to output at 500 Vdc input to frame ground at 500 Vdc safety approvals UL/cUL, GS EMI/EMC FCC Part 15 Class B, EN55022/EN55024 Class B, CE MTBF at full load, 25°C RoHS 2011/65/EU typ 4,242 2,121 Vdc Vdc 20 20 MΩ MΩ 140,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature derate linearly 2.5% per °C from 41~60°C storage temperature typ max units 0 60 °C -10 85 °C operating humidity non-condensing 20 90 % storage humidity non-condensing 20 90 % cui.com For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: ETSA 150W U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/08/2015 │ page 3 of 6 MECHANICAL parameter conditions/description dimensions 170 x 85 x 44 inlet plug IEC320 / C14 min typ max units mm MECHANICAL DRAWING units: mm tolerance: ±0.5 mm cui.com For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: ETSA 150W U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/08/2015 │ page 4 of 6 DC CORD units: mm See Table 1 SECTIONAL DRAWING 4P POWER DIN FRONT VIEW Table 1 MODEL NO. CABLE ETSA1201167U 14 AWG, Black, UL1571, 80°C, 30 V, 14 AWGX1C + aluminum shield (14 AWG) ETSA160938U 14 AWG, Black, UL1571, 80°C, 30 V, 14 AWGX1C + aluminum shield (14 AWG) ETSA190790U 14 AWG, Black, UL1571, 80°C, 30 V, 14 AWGX1C + aluminum shield (14 AWG) ETSA240625U 14 AWG, Black, UL1571, 80°C, 30 V, 14 AWGX1C + aluminum shield (14 AWG) ETSA360417U 16 AWG, Black, UL1185 80/90°C, 300 V, 16 AWGX1C + aluminum shield (16 AWG) ETSA480313U 16 AWG, Black, UL1185 80/90°C, 300 V, 16 AWGX1C + aluminum shield (16 AWG) cui.com For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: ETSA 150W U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/08/2015 │ page 5 of 6 AC CORD units: mm cord length NORTH AMERICA EUROPE UNITED KINGDOM AUSTRALIA CHINA SOUTH KOREA BRAZIL SOUTH AFRICA JAPAN Table 2 AC INPUT CORD LENGTH North America 1,830 mm ±50 Europe 1,830 mm ±30 United Kingdom 1,800 mm ±50 Australia 1,830 mm ±30 China 1,830 mm ±50 South Korea 1,800 mm ±30 Brazil 1,830 mm ±30 South Africa 1,830 mm ±30 Japan 1,830 mm ±30 cui.com For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: ETSA 150W U │ DESCRIPTION: AC-DC POWER SUPPLY date 05/08/2015 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 11/22/2013 1.01 added ac cord options 10/09/2014 1.02 updated to level VI efficiency 05/08/2015 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.