New Product DFL15005S thru DFL1514S Vishay General Semiconductor Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers FEATURES • Low profile: typical height of 2.5 mm • UL recognition, file number E54214 ~ • Ideal for automated placement ~ • High surge current capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C ~ • Solder dip 260 °C, 40 s ~ • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Case Style Low Profile DFS TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for SMPS, lighting ballaster, adapter, battery charger, home appliances, office equipment, and telecommunication applications. PRIMARY CHARACTERISTICS IF(AV) 1.5 A VRRM 50 V to 1400 V IFSM 50 A IR 5 µA VF 1.1 V TJ max. 150 °C MECHANICAL DATA Case: Low profile DFS Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked on body MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL DFL 15005S DFL 1501S DFL 1502S DFL 1504S DFL 1506S DFL 1508S DFL 1510S DFL 1514S UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 1400 V Maximum RMS voltage PARAMETER VRMS 35 70 140 280 420 560 700 980 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 1400 V Maximum average forward output rectified current at TA = 40 °C (1) IF(AV) 1.5 A Peak forward surge current single half sine-wave superimposed on rated load IFSM 50 A I2t 10 A 2s TJ, TSTG - 55 to + 150 °C Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Note: (1) Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13 mm) copper pads Document Number: 88874 Revision: 31-Jan-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product DFL15005S thru DFL1514S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DFL TEST SYMBOL 15005S CONDITIONS PARAMETER DFL 1501S DFL 1502S DFL 1504S DFL 1506S DFL 1508S DFL 1510S DFL 1514S UNIT Max. instantaneous forward voltage drop per diode 1.5 A VF 1.1 V Maximum DC reverse current at rated DC blocking voltage per diode TA = 25 °C TA = 125 °C IR 5.0 500 µA CJ 16 pF Typical junction capacitance per diode (1) Note: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL DFL 15005S DFL 1501S DFL 1502S DFL 1504S RθJA RθJL Typical thermal resistance (1) DFL 1506S DFL 1508S DFL 1510S DFL 1514S 40 15 UNIT °C/W Note: (1) Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13 mm) copper pads ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE DFL1506S-E3/45 0.341 45 50 Tube DFL1506S-E3/77 0.341 77 1500 13" diameter paper tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 60 50 Hz Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Current (A) 2.0 1.5 1.0 0.5 TJ = 150 °C Single Sine-Wave 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 1 100 10 Ambient Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Per Diode Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88874 Revision: 31-Jan-08 New Product DFL15005S thru DFL1514S Vishay General Semiconductor 100 TJ = 150 °C 1 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 TJ = 125 °C TJ = 25 °C 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.01 0.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.5 0.6 0.7 0.9 0.8 1.1 1.0 1.3 1.2 10 1 1.4 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Voltage Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode Instantaneous Reverse Leakage Current (µA) 1000 TJ = 150 °C 100 TJ = 125 °C 10 1 TJ = 25 °C 0.1 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style Low Profile DFS 0.205 (5.2) 0.195 (5.0) 0.047 (1.20) 0.040 (1.02) Mounting Pad Layout 0.047 Min. (1.20 Min.) 0.404 Max. (10.26 Max.) 0.060 Min. (1.52 Min.) 0.335 (8.51) 0.320 (8.13) 45o 0.013 (0.330) 0.009 (0.241) 0.404 (10.3) 0.386 (9.80) 0.255 (6.5 ) 0.245 (6.2 ) 0.205 (5.2) 0.195 (5.0) 0.102 (2.60) 0.094 (2.40) 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) Document Number: 88874 Revision: 31-Jan-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1