05217 EM8Q-100 Only One Name Means ProTek’Tion™ LCD emi filter/tvs array Description The EM8Q-100 is a QFN-16, 8 line low pass filter array with integrated TVS diodes. The EM8Q-100 is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed data interfaces such as LCD displays and SMART phones. With a desired cutoff frequency of 150MHz, the EM8Q-100 provides good EMI/RFI attenuation better than 25dB in the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity requirements. QFN-16 package Features applications • • • • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns ESD Protection > 25 kilovolts Bidirectional EMI Filtering/TVS Low Pass Filters Low Insertion Loss: -3dB Roll-Off @ 150MHz Protects up to 8 Data Lines RoHS Compliant REACH Compliant SMART Phones LCD Display Panel Portable Electronics SMART Cards Mechanical characteristics • Molded JEDEC QFN-16 Package • Approximate Weight: 7 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 circuit diagram & pin configuration R2 I/O 4 Pin 16 R3 Pin 15 L3 L4 L5 16 15 14 R4 1 L2 D2 R5 I/O 7 Pin 13 R6 Pin 6 I/O 8 Pin 12 R7 3 4 L1 L2 I/O 6 Pin 14 D1 Pin 5 2 L1 Pin 4 Pin 3 I/O 5 L6 13 Pin 11 5 6 7 8 L3 L4 L5 L6 3mm X 3mm R8 D2 Pin 7 Pin 8 Pin 9 10 11 L8 L8 R1 I/O 3 Pin 1 12 L7 I/O 2 Pin 2 D1 9 L7 I/O 1 Pin 10 Center tab as the ground 05217.R5 3/11 Page 1 www.protekdevices.com 05217 EM8Q-100 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TA -40 to 85 °C Operating Temperature Storage Temperature TSTG -55 to 150 °C DC Power per Resistor P 100 mW Typical Resistance @ ±15% R 100 OHMs Soldering Temperature for 10 seconds TL 265 °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER EM8Q-100 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT typical forward voltage MINIMUM ATTENUATION cut-off frequency (50 ohms i/o) zero bias TYPICAL CAPACITANCE per line (Note 1) VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @ 10mA VF VOLTS @ 800-3000 MHz dB fC MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 150 20 NoteS 1. ± 20% tolerance. 05217.R5 3/11 Page 2 www.protekdevices.com 05217 EM8Q-100 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 typical filter performance (TA = 25°C, DC Bias = 0V, 50 Ohm Environment) 0 Insertion Loss - dB -10 -20 -30 -40 1 10 1000 10000 figure 2 resistance vs temperature (Normalized to Resistance at 25°C) 1.10 Normalized Resistance 100 Frequency - MHz 1.06 1.02 0.98 0.94 0.90 -40 05217.R5 3/11 -20 0 20 40 Temperature - °C Page 3 60 80 100 www.protekdevices.com 05217 EM8Q-100 Only One Name Means ProTek’Tion™ qfn-16 package information C outline dimensions dim millimeters min A B max inches min 3.00 SQ 1.65 Pin 1 max F D E 0.118 SQ 1.75 0.065 0.069 C 1.50 BSC 0.059 BSC D 0.50 BSC 0.020 BSC E 0.18 0.28 0.007 0.011 F 0.35 0.45 0.014 0.018 G 0.71 0.81 0.028 0.032 H 0.00 0.05 0.00 0.002 I 0.18 0.23 0.007 0.009 A Chamfer 0.300 x 45 B TOP VIEW G NOTEs 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Decimal tolerances for mounting pad and outline .xxx ± 0.05mm (± 0.002”). 4. Package length, width and height does not include protrusions, lead and gate burrs. H SIDE VIEW I pad layout dimensions millimeters inches nominal nominal 4.00 0.16 B 0.70 0.028 C 1.00 0.040 D 0.50 0.020 E 0.30 0.012 dim A Pin 1 B A C NOTES 1. Controlling dimension: millimeters. E 05217.R5 3/11 Page 4 D www.protekdevices.com 05217 EM8Q-100 Only One Name Means ProTek’Tion™ TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E F Pin 1 W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 12mm A0 B0 K0 D E F W P0 P2 P tmax 3.30 ± 0.10 3.30 ± 0.10 1.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.10 12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 8.00 ± 0.10 0.25 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 12mm tape. Marking on Part - logo, part number and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06054.R3 3/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty EM8Q-100 -LF -T73 3,000 7” n/a EM8Q-100 -LF -T13 10,000 7” n/a 05217.R5 3/11 Page 5 www.protekdevices.com 05217 EM8Q-100 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2005 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05217.R5 3/11 Page 6 www.protekdevices.com