Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 DTV32, DTV32F, DTV32B Vishay General Semiconductor High Voltage Damper Diodes TO-220AC FEATURES ITO-220AC • Glass passivated chip junction • High breakdown voltage capability • Very fast reverse recovery time • Fast forward recovery time 2 2 1 1 DTV32 DTV32F PIN 1 PIN 1 • High efficiency, low switching losses • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) CASE PIN 2 PIN 2 • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) TO-263AB K • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 2 1 TYPICAL APPLICATIONS DTV32B PIN 1 PIN 2 K HEATSINK For use in high resolution display TV and monitor horizontal deflection application. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 1500 V trr 175 ns tfr 280 ns VF 1.35 V Case: TO-220AC, ITO-220AC, TO263AB Epoxy meets UL 94 V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage VRRM 1500 V Maximum RMS voltage VRMS 1050 V Maximum DC blocking voltage VDC 1500 V Maximum average forward rectified current (fig. 1) IF(AV) 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 130 A TJ, TSTG - 55 to + 150 °C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88575 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 DTV32, DTV32F, DTV32B Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 6 A IF = 6 A Maximum instantaneous forward voltage (1) Maximum DC reverse current at VRRM SYMBOL VALUE UNIT TJ = 25 °C TJ = 125 °C VF 1.5 1.35 V TJ = 25 °C TJ = 125 °C IR 100 1.0 µA mA Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 0.1 IRM trr 175 ns Typical forward recovery time IF = 6 A, dI/dt = 48 A/µs, VFR = 3 V tfr 280 ns Peak forward recovery overshoot voltage IF = 6 A, dI/dt = 48 A/µs, TJ = 100 °C VFP 8 12 V typical maximum Note: (1) Pulse test: 300 µs pulse width, 2 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance from junction to case DTV32 RJC DTV32B DTV32F UNIT 4.0 °C/W 2.0 ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC DTV32-E3/45 1.80 45 50/tube Tube ITO-220AC DTV32F-E3/45 1.95 45 50/tube Tube TO-263AB DTV32B-E3/45 1.77 45 50/tube Tube TO-263AB DTV32B-E3/81 1.77 81 800/reel Tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 140 Peak Forward Surge Current (A) Average Forward Current (A) 12 DTV32 DTV32B 10 8 6 DTV32F 4 2 0 120 100 80 60 40 20 0 25 50 75 100 125 150 175 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88575 Revision: 14-Jan-11 Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 DTV32, DTV32F, DTV32B Vishay General Semiconductor 1000 TJ = 125 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 100 °C 1 TJ = 25 °C 0.1 0.01 0.2 0.6 1.0 1.4 1.8 10 1 0.1 2.2 100 10 1 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Voltage Figure 5. Typical Capacitance 500 1000 TJ = 125 °C 100 Reverse Recovery Time (ns) Instantaneous Forward Current (A) 100 TJ = 100 °C 10 1 TJ = 25 °C 0.1 400 dI/dt = 50 A/µs 300 200 dI/dt = 100 A/µs 100 0 0.01 0 300 600 900 1200 1500 1 2 3 4 5 6 7 8 9 Reverse Voltage (V) Forward Current (A) Figure 4. Typical Reverse Current Figure 6. Typical Reverse Recovery Time Document Number: 88575 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 10 www.vishay.com 3 Not for New Design - End of Life - Last Available Purchase Date is 31-May-2011 DTV32, DTV32F, DTV32B Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7° REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88575 Revision: 14-Jan-11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1