MAAV-007090-000100 Voltage Variable Absorptive Attenuator, 1700 - 2000 MHz Rev. V2 Features • • • • • • • • • • • • • • Functional Schematic Input IP3: +31 dBm Min (Full Attenuation Range) Input IP3 is 15 -20 dB Better than GaAs Linear Operation: +20 dBm Typ. 35 dB Dynamic Range (With 30 mA Bias Current) Single Control Voltage 50 ohm Impedance Linear Driver, MADR-007098-000100, Available Test Boards are Available Tape and Reel Packaging Available Lead-Free SOW-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of AT10-0017 Description M/A-COM's MAAV-007090-000100 is a PIN diode based voltage variable attenuator. This device is in a SOW-16, wide body plastic surface mount package. These attenuators have linear operating power and input intercept point levels 15 - 20 dB better than GaAs FET MMIC voltage variable attenuators. They are ideally suited for use where low distortion, high linear operating power and high dynamic range are required. These devices are optimized for the PCS frequency band, but exhibit excellent performance and repeatability over the entire specified frequency band. The MAAV-007090-000100 is ideally suited for wireless communications systems. Pin Configuration Pin No. Function Pin No. Function 1 GND 9 GND 2 RF 10 RF 3 GND 11 GND 4 GND 12 GND GND 13 GND Ordering Information Part Number Package 5 MAAV-007090-000100 Tube 6 GND 14 GND MAAV-007090-0001TR 1000 piece reel 7 BIAS1 15 BIAS1 MAAV-007090-0001TB Unit Mounted on Test Board 8 GND 16 GND MAAV-007090-DR01TB Unit with Driver on Test Board 1. Bias currents may be applied to pin 7 or 15. The unused pins should be isolated. Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007090-000100 Voltage Variable Absorptive Attenuator, 1700 - 2000 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss 0 volts 1700-2000 MHz 1930 - 1990 MHz dB dB — — — 2.5 3.5 3.0 Attenuation (Above Loss) 10 mA bias current 1700-2000 MHz 1930 - 1990 MHz dB dB 28 30 — 35 — — Attenuation Flatness 0 to 30 dB attenuation 1700-2000 MHz 1930 - 1990 MHz dB dB — — 1.5 0.4 2.0 0.6 VSWR 0 to 30 dB attenuation 1700-2000 MHz 1930 - 1990 MHz Ratio Ratio ——- 1.6:1 1.5:1 1.8:1 1.7:1 Switching Speed 50% Control to 90%/10% RF 1700-2000 MHz µs — — 3.0 Linear Operation — 1700-2000 MHz dBm — +20 — Input IP3 Two-tone inputs up to +10 dBm 1700-2000 MHz dBm +31 —- — I Control — 1700-2000 MHz mA — —- 30 Absolute Maximum Ratings Parameter Max. Input Power 1700 - 2000 MHz 2,3 Recommended PCB Configuration Absolute Maximum +27 dBm Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007090-000100 Voltage Variable Absorptive Attenuator, 1700 - 2000 MHz Rev. V2 Typical Performance Curves Attenuation Flatness (dB) @ +25°C Insertion Loss R ef - 4 0 °C + 2 5 °C + 8 5 °C 10 d B 2 0 dB 3 0 dB 2.00 5.0 Flatness (dB) 1.00 Loss (dB) 4.0 3.0 0.00 -1.00 2.0 1.0 1600 -2.00 1600 1700 1800 1900 2000 1700 1800 2100 1900 2000 2100 Fre que ncy (MHz ) Fre que ncy (MHz ) Typical VSWR @ +25°C Attenuation vs. Bias Current, Frequency = 2000 MHz 3 0 dB 15 d B R ef + 2 5 °C + 8 5 °C 1 3 5 40 Attenua tio n (dB) 2.5 VSWR (Ratio) - 4 0 °C 2.0 1.5 30 20 10 0 1.0 1600 0 1700 1800 1900 Fre que ncy (MHz ) 2000 2 4 6 7 8 9 10 2100 Bias Current (mA) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007090-000100 Voltage Variable Absorptive Attenuator, 1700 - 2000 MHz Rev. V2 Lead-Free, SOW-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.