Part Number: www.SunLED.com LUS39C T-1 (3mm) SOLID STATE LAMP Features z LOW POWER CONSUMPTION. z POPULAR T-1 DIAMETER PACKAGE. z GENERAL PURPOSE LEADS. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE z RoHS ON TAPE AND REEL. COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) US (GaAsP/GaP) Unit US (GaAsP/GaP) Unit Forward Voltage (Typ.) (IF=10mA) VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Voltage VR 5 V Forward Current IF 25 mA Reverse Current (Max.) (VR=5V) IR 10 uA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 145 mA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 607 nm Power Dissipation PT 62.5 mW Operating Temperature TA -40 ~ +85 Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 610 nm Tstg -40 ~ +85 Δλ 35 nm C 15 pF Storage Temperature °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Capacitance (Typ.) (VF=0V, f=1MHz) Part Number LUS39C Emitting Color Orange Published Date : MAR 18,2008 Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) mcd Lens-color Viewing Angle 2 θ 1/2 607 50° Checked : B.L.LIU P.1/4 min. typ. 18 49 Orange Transparent Drawing No : SDSA2775 Wavelength nm λP V3 Part Number: www.SunLED.com LUS39C T-1 (3mm) SOLID STATE LAMP US Published Date : MAR 18,2008 Drawing No : SDSA2775 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LUS39C T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 18,2008 Drawing No : SDSA2775 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 18,2008 LUS39C Drawing No : SDSA2775 LUS39C V3 Checked : B.L.LIU P.4/4