Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A GENERAL PURPOSE PLASTIC RECTIFIER GP10-005R THRU GP10-16R FEATURES z LOW FORWARD VOLTAGE z HIGH CURRENT CAPABILITY z LOW LEAKAGE CURRENT z HIGH SURGE CAPABILITY z LOW COST z BEVEL ROUND CHIP, AVALANCHE OPERATION 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) MECHANICAL DATA z CASE: DO41, MOLDED PLASTIC USE UL 94V-0 RECOGNIZED FLAME RETARDANT EPOXY, DIMENSIONS IN INCHES AND (MILLIMETERS) zTERMINALS: AXIAL LEADS, SOLDERABLE PER MIL-STD202,METHOD 208 z POLARITY: COLOR BAND DENOTES CATHODE z WEIGHT: 0.34 GRAMS .107(2.7) .080(2.0) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 UNITS RATINGS SYMBOL -005R -01R -02R -04R -06R -08R -10R -13R -15R -16R MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 200 400 600 800 1000 1300 1500 1600 V MAXIMUM RMS VOLTAGE VRMS 35 70 140 280 420 560 700 910 1050 1120 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 200 400 600 800 1000 1300 1500 1600 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT IO 1.0 A 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF IFSM 50 A SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL THERMAL RESISTANCE (NOTE 2) TYPICAL JUNCTION CAPACITANCE (NOTE 1) Rθja 50 ℃/W CJ 15 PF STORAGE TEMPERATURE RANGE TSTG - 55 TO + 175 ℃ OPERATING TEMPERATURE RANGE TOP - 55 TO + 175 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 GP10 UNITS CHARACTERISTICS SYMBOL -005R -01R -02R -04R -06R -08R -10R -13R -15R -16R MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.1 V MAXIMUM REVERSE CURRENT AT 25℃ IR 5 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 50 μA NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20×20×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm GP10-005R THRU GP10-16R Page: 1 RATINGS AND CHARACTERISTIC CURVE GP10-005R THRU GP10-16R 1.0 CURRENT (A) Io-AVERAGE RECTIFIED 1.2 A=20 mm 0.8 A=10 mm 0.6 0.4 0.2 A=5.5 mm 10mm 10mm A=COPPER AREA P.C. BOARD 0 0 20 40 60 80 100 120 140 160 180 FORWARD SURGE CURRENT AMPERES PK (HALF SINE-WAVE) Fig. 1-MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE Fig. 5-MAXIMUM FORWARD SURGE VS NUMBER OF CYCLES 50 40 30 20 10 0 1 TA-AMBIENT TEMPERATURE (OC) 1.0 RESISTIVE / INDUCTIVE LOADS 5 10 20 0.8 0.6 CAPACITIVE LOADS 10mm 10mm 0.4 COPPER PC AREA BOARD 5.5mm 0.2 0 20 40 60 80 100 120 140 160 180 TA-AMBIENT TEMPERATURE (OC ) IR-REVERSE CURRENT (uA) Io-AVERAGE RECTIFIED CURRENT (A) IPK IAV 1000 500 200 100 50 20 10 5 2 1 .5 .2 .1 .05 .02 .01 1.0 L=5mm L=10mm L=20mm 0.8 0.6 0.4 0.2 10mm 10mm COPPER PC AREA BOARD 5.5mm 0 20 40 60 80 100 120 140 160 180 TA-AMBIENT TEMPERATURE (OC) GP10-005R THRU GP10-16R TJ=100oC TJ=75oC TJ=50oC TJ=25oC 100 200 300 400 500 600 Fig. 7-TYPICAL JUNCTION CAPACITANCE CJ-JUNCTION CAPACITANCE IO-AVERAGE RECTIFIED CURRENT (A) L=LEAD LENTH TJ=125oC PEAK INVERSE VOLTAGE Fig. 3 MAXIMUM CURRENT RATING EFFECT OF LEAD LENGTHS RESISTIVE / INDUCTIVE LOAD 1.2 100 Fig. 6-TYPICAL REVERSE CHARACTERISTIC Fig. 2-MAXIMUM CURRENT RATING CAPACITIVE LOAD,10 mm LEAD LENGTHS 1.2 10 No. OF CYCLES AT 60 Hz 100 10 0 1 10 100 VR-REVERSE VOLTAGE (V) Page: 2 1000 RATINGS AND CHARACTERISTIC CURVE GP10-005R THRU GP10-16R Fig. 8-FORWARD PULSE CURRENT VS PULSE DURATION 10 10,000 +150oC +25oC IP-PULSE CURRENT (A) IF-FORWARD CURRENT (A) Fig. 4-TYPICAL FORWARD CHARACTERISTICS 1.0 0.1 .01 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF-FORWARD VOLTAGE(V) GP10-005R THRU GP10-16R 1,000 100 10 0.1uS 1uS 10uS 100uS 1mS 10mS PULSE DURATION (Seconds) Page: 3