DATA SHEET SILICON TRANSISTOR FN4xxx RESISTOR BUILT-IN TYPE PNP TRANSISTOR ★ PACKAGE DRAWING (Unit: mm) FEATURES 0.65 –0.15 • Compact package +0.1 • Resistors built-in type • Complementary to FA4xxx 0.4 +0.1 –0.05 +0.1 0.16 –0.06 Marking PACKAGE FN4xxx SC-59 2 Collector to Base Voltage VCBO −60 V Collector to Emitter Voltage VCEO −50 V Emitter to Base Voltage VEBO −5 V IC −0.1 A IC(pulse) −0.2 A Total Power Dissipation PT 0.2 W Junction Temperature Tj 150 °C Collector Current (pulse) Note Storage Temperature Tstg −55 to +150 MARK R1 0.3 °C 0.95 ★ EQUIVALENT CIRCUIT 3 UNIT ★ PIN CONNECTION 1: Emitter 2: Base 2 3: Collector R1 R2 R2 1.1 to 1.4 0.95 2.9 ± 0.2 Note PW ≤ 10 ms, Duty Cycle ≤ 50% PART NUMBER 1 0.4 +0.1 –0.05 ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Collector Current (DC) 0 to 0.1 3 1.5 PART NUMBER 2.8 ± 0.2 ORDERING INFORMATION 1 PART NUMBER MARK R1 R2 UNIT 22.0 kΩ FN4A4M NA1 10.0 10.0 kΩ FN4L4L NK1 47.0 FN4F4M NB1 22.0 22.0 kΩ FN4A4Z NL1 10.0 kΩ FN4L4M NC1 47.0 47.0 kΩ FN4F4Z NM1 22.0 kΩ FN4L3M ND1 4.7 4.7 kΩ FN4L4Z NN1 47.0 kΩ FN4L3N NE1 4.7 10.0 kΩ FN4F3M NP1 2.2 2.2 kΩ FN4L3Z NF1 4.7 kΩ FN4F3P NQ1 2.2 10.0 kΩ FN4A3Q NG1 1.0 10.0 kΩ FN4F3R NR1 2.2 47.0 kΩ FN4A4P NH1 10.0 47.0 kΩ FN4A4L NS1 10.0 4.7 kΩ FN4F4N NJ1 22.0 47.0 kΩ FN4L4K NT1 47.0 10.0 kΩ The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D16491EJ2V0DS00 (2nd edition) Date Published February 2003 NS CP(K) Printed in Japan The mark ★ shows major revised points. 2002 FN4xxx ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTICS SYMBOL TEST CONDITIONS Collector Cut-off Current ICBO VCB = −50 V, IE = 0 DC Current Gain hFE1 VCE = −5.0 V, IC = −5.0 mA hFE2 VCE = −5.0 V, IC = −50 mA VCE(sat) IC = −5.0 mA, IB = −0.25 mA Low-level Input Voltage VIL VCE = −5.0 V, IC = −100 µA High-level Input Voltage VIH VCE = −0.2 V, IC = −5.0 mA Input Resistor R1 Emitter to Base Resistor R2 Collector Saturation Voltage MIN. TYP. MAX. UNIT −100 nA Note1 −0.2 V Note2 V Note3 kΩ V kΩ Note 1. PART NUMBER MIN. FN4A4M FN4F4M FN4L4M FN4L3M FN4L3N FN4L3Z FN4A3Q FN4A4P FN4F4N FN4L4L FN4A4Z FN4F4Z FN4L4Z FN4F3M FN4F3P FN4F3R FN4A4L FN4L4K ★ hFE1 TYP. 35 60 85 20 35 135 35 85 85 60 135 135 135 8 35 85 20 35 MAX. MIN. 100 195 340 80 100 600 100 340 340 195 600 600 600 50 100 340 80 100 80 90 95 80 80 100 80 95 95 90 100 100 100 50 80 95 80 80 MAX. MIN. −0.8 −0.8 −0.8 −0.8 −0.6 −0.5 −0.5 −0.5 −0.6 −0.9 −0.5 −0.5 −0.5 −0.8 −0.5 −0.5 −0.9 −2.0 −3.0 −4.0 −5.0 −3.0 −3.0 −1.2 −2.0 −3.0 −3.0 −6.0 −2.0 −3.0 −4.0 −3.0 −2.0 −2.0 −6.0 −8.0 hFE2 TYP. UNIT MAX. - Note 2. PART NUMBER MIN. FN4A4M FN4F4M FN4L4M FN4L3M FN4L3N FN4L3Z FN4A3Q FN4A4P FN4F4N FN4L4L FN4A4Z FN4F4Z FN4L4Z FN4F3M FN4F3P FN4F3R FN4A4L FN4L4K 2 VIL TYP. Data Sheet D16491EJ2V0DS VIH TYP. UNIT MAX. V V V V V V V V V V V V V V V V V V FN4xxx Note 3. PART NUMBER FN4A4M FN4F4M FN4L4M FN4L3M FN4L3N FN4L3Z FN4A3Q FN4A4P FN4F4N FN4L4L FN4A4Z FN4F4Z FN4L4Z FN4F3M FN4F3P FN4F3R FN4A4L FN4L4K MIN. R1 TYP. MAX. MIN. R2 TYP. MAX. UNIT 7.00 15.40 32.90 3.29 3.29 3.29 0.70 7.00 15.40 32.90 7.00 15.40 32.90 1.54 1.54 1.54 7.00 32.90 10.00 22.00 47.00 4.70 4.70 4.70 1.00 10.00 22.00 47.00 10.00 22.00 47.00 2.20 2.20 2.20 10.00 47.00 13.00 28.60 61.10 6.11 6.11 6.11 1.30 13.00 28.60 61.10 13.00 28.60 61.10 2.86 2.86 2.86 13.00 61.10 7.00 15.40 32.90 3.29 7.00 10.00 22.00 47.00 4.70 10.00 13.00 28.60 61.10 6.11 13.00 7.00 32.90 32.90 15.40 10.00 47.00 47.00 22.00 13.00 61.10 61.10 28.60 1.54 7.00 32.90 3.29 7.00 2.20 10.00 47.00 4.70 10.00 2.86 13.00 61.10 6.11 13.00 kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ kΩ TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE PT - Total Power Dissipation - mW 250 200 150 100 50 0 0 50 100 150 200 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 3 FN4xxx [FN4A4M] TYPICAL CHARACTERISTICS (TA = 25°C) −50 IB = −430 µ A −380 −40 −330 −280 −30 −230 −180 −20 −130 −10 0 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −80 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V IC - Collector Current - mA COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 10.0 V VIN = 5.0 V - 0.4 - 0.2 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 0.1 -1 - 10 - 0.1 -1 25°C R - Resistor - kΩ −25°C - 10 -1 - 0.4 - 0.6 - 0.8 -1 - 1.2 - 1.4 VIN - Input Voltage - V 16 12 8 4 0 75 100 TA - Ambient Temperature - °C 4 VCE = −5.0 V TA = 75°C - 100 50 - 100 - 100 RESISTOR vs. AMBIENT TEMPERATURE 25 - 10 IC - Collector Current - mA 20 0 TA = 75°C 25°C −25°C - 0.01 IC - Collector Current - mA -25 - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE VCE = −0.2 V -1 - 80 IC = 10･IB - 1000 - 10 - 60 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 40 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 20 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 15.0 V - 0.3 Data Sheet D16491EJ2V0DS - 1.6 - 1.8 FN4xxx [FN4F4M] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −400 µ A COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −350 −300 −40 −250 −30 −200 −150 −20 −100 −10 −50 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 - 0.3 15.0 V - 0.2 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA -1 IC = 10･IB - 0.1 TA = 75°C 25°C −25°C - 0.01 -1 IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C -1 - 0.1 -1 - 10 - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE - 1000 - 10 - 10 IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 VCE = −0.2 V - 40 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 20 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 10.0 V VCE = −5.0 V TA = 75°C - 100 25°C −25°C - 10 - 100 IC - Collector Current - mA -1 - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 50 R - Resistor - kΩ 40 30 20 10 -25 0 25 50 75 100 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 5 FN4xxx [FN4L4M] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 IB = −290 µ A −40 −240 −30 −190 −140 −20 −90 −10 0 −40 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 - 0.3 15.0 V - 0.2 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 -1 - 10 - 100 IC - Collector Current - mA -1 - 0.01 -1 TA = −25°C 25°C 75°C -1 - 0.1 -1 - 10 TA = 75°C 25°C −25°C - 10 - 100 RESISTOR vs. AMBIENT TEMPERATURE R - Resistor - kΩ 80 60 40 20 0 50 75 100 TA - Ambient Temperature - °C 6 -1 - 0.6 - 0.8 -1 - 1.2 - 1.4 VIN - Input Voltage - V 100 25 VCE = −5.0 V - 100 IC - Collector Current - mA 0 - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V - 10 - 10 IC - Collector Current - mA - 1000 VCE = −0.2 V -25 IC = 10･IB TA = 75°C 25°C −25°C - 0.1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 40 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0V - 20 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 10.0 V VIN = 5.0 V - 0.4 Data Sheet D16491EJ2V0DS - 1.6 - 1.8 FN4xxx [FN4L3M] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −460 µ A −410 −40 −360 −30 −310 −260 −20 −210 −10 0 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −160 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 10.0 V - 0.4 VIN = 5.0 V - 0.3 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA -1 - 0.1 -1 - 10 - 100 - 0.1 - 0.01 -1 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 80 IC = 10・IB TA = 75°C 25°C −25°C - 1000 - 10 - 60 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 VCE = −0.2 V - 40 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 20 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 15.0 V - 0.2 VCE = −5.0 V TA = 75°C - 100 25°C −25°C - 10 - 100 IC - Collector Current - mA -1 - 0.4 - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 - 1.8 VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 10 R - Resistor - kΩ 8 6 4 2 0 -25 0 25 50 75 100 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 7 FN4xxx [FN4L3N] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −430 µ A COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −380 −330 −40 −280 −30 −230 −20 −180 −130 −10 −80 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 10.0 V - 0.4 VIN = 5.0 V - 0.3 - 0.2 15.0 V - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA - 0.1 - 0.01 -1 IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 0.1 -1 - 10 25°C - 10 - 100 R - Resistor - kΩ 16 R2 8 R1 4 0 25 50 75 100 TA - Ambient Temperature - °C 8 −25°C -1 - 0.4 - 0.6 - 0.8 VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 0 VCE = −5.0 V TA = 75°C 20 -25 - 100 - 100 IC - Collector Current - mA 12 - 10 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE VCE = −0.2 V -1 - 100 IC = 10・IB TA = 75°C 25°C −25°C - 1000 - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS -1 - 1.2 FN4xxx [FN4L3Z] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 −300 IB = −350 µ A −250 −40 −200 −30 −150 −100 −20 −50 −10 0 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 10.0 V - 0.4 VIN = 5.0 V - 0.3 - 0.2 15.0 V - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA TA = 75°C 25°C −25°C - 0.1 - 0.01 -1 -1 - 0.1 -1 - 10 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 100 IC = 10・IB - 1000 VCE = −0.2 V - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 VCE = −5.0 V TA = 75°C - 100 25°C - 10 - 100 IC - Collector Current - mA −25°C -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 10 R - Resistor - kΩ 8 6 4 2 0 -25 0 25 50 75 100 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 9 FN4xxx [FN4A3Q] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −380 µ A −330 −40 −280 −30 −230 −20 −180 −130 −10 0 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −80 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 - 0.4 - 0.3 VIN = 5.0 V - 0.2 10.0 V - 0.1 15.0 V 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA -1 - 0.1 -1 - 10 - 0.1 - 0.01 -1 - 100 R - Resistor - kΩ 6 4 R1 0 50 75 100 TA - Ambient Temperature - °C 10 25°C -1 - 0.2 - 0.4 - 0.6 VIN - Input Voltage - V 8 25 −25°C - 10 R2 0 VCE = −5.0 V TA = 75°C 12 -25 - 100 - 100 RESISTOR vs. AMBIENT TEMPERATURE 2 - 10 IC - Collector Current - mA IC - Collector Current - mA 10 TA = 75°C 25°C −25°C COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 100 IC = 10・IB - 1000 VCE = −0.2 V - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS - 0.8 -1 FN4xxx [FN4A4P] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 IB = −160 µ A −140 −120 −40 −100 −30 −80 −60 −20 −40 −10 −20 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 10.0 V - 0.3 15.0 V - 0.2 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA TA = 75°C 25°C −25°C - 0.1 - 0.01 -1 -1 - 0.1 -1 - 10 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 100 IC = 10･IB - 1000 VCE = −0.2 V - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 - 100 VCE = −5.0 V TA = 75°C −25°C - 10 - 100 25°C -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 1.2 VIN - Input Voltage - V IC - Collector Current - mA RESISTOR vs. AMBIENT TEMPERATURE 60 R - Resistor - kΩ R2 40 20 R1 0 -25 0 25 50 75 100 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 11 FN4xxx [FN4F4N] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −160 µ A COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −140 −40 −120 −100 −30 −80 −60 −20 −40 −10 −20 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 10.0 V - 0.3 15.0 V - 0.2 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA IC = 10・IB - 0.1 - 0.01 -1 IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C -1 - 0.1 -1 - 10 - 100 70 R - Resistor - kΩ R2 40 R1 20 10 0 0 25 50 75 100 TA - Ambient Temperature - °C 12 −25°C 25°C -1 - 0.2 - 0.4 - 0.6 - 0.8 -1 VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE -25 TA = 75°C - 10 80 30 - 100 VCE = −5.0 V - 100 IC - Collector Current - mA 50 - 10 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE VCE = −0.2 V 60 TA = 75°C 25°C −25°C - 1000 - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS - 1.2 - 1.4 FN4xxx [FN4L4L] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 −40 −350 IB = −400 µ A −300 −30 −250 −200 −20 −150 −100 −10 0 −50 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 10.0 V - 0.4 - 0.2 - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA IC = 10･IB - 0.1 - 0.01 -1 VCE = −0.2 V TA = −25°C 25°C 75°C -1 - 0.1 -1 - 10 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = 75°C 25°C −25°C - 1000 - 10 - 60 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 40 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 20 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 15.0 V VIN = 5.0 V - 0.3 - 100 VCE = −5.0 V TA = 75°C −25°C - 10 - 100 25°C -1 - 0.9 - 1.1 - 1.3 - 1.5 - 1.7 - 1.9 - 2.1 - 2.3 - 2.5 - 2.7 VIN - Input Voltage - V IC - Collector Current - mA RESISTOR vs. AMBIENT TEMPERATURE 60 R - Resistor - kΩ R1 40 R2 20 0 -25 0 25 50 75 100 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 13 FN4xxx [FN4A4Z] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 −300 IB = −350 µ A −40 −250 −200 −30 −150 −20 −100 −50 −10 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 - 0.3 10.0 V 15.0 V - 0.2 - 0.1 0 0 TA = 75°C 25°C −25°C 100 10 -1 - 10 - 100 IC - Collector Current - mA -1 - 0.1 -1 - 0.1 - 0.01 -1 - 10 25°C - 100 R - Resistor - kΩ -1 0 - 0.2 - 0.4 - 0.6 VIN - Input Voltage - V 12 8 4 0 50 −25°C - 10 16 25 VCE = −5.0 V TA = 75°C RESISTOR vs. AMBIENT TEMPERATURE 0 - 100 - 100 20 -25 - 10 IC - Collector Current - mA IC - Collector Current - mA 75 100 TA - Ambient Temperature - °C 14 TA = 75°C 25°C −25°C COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 10 - 100 IC = 10・IB - 1000 VCE = −0.2 V - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS - 0.8 -1 FN4xxx [FN4F4Z] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 IB = −350 µ A −40 −300 −250 −200 −30 −150 −20 −100 −50 −10 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 - 0.3 10.0 V - 0.2 15.0 V - 0.1 0 0 TA = 75°C 25°C −25°C 100 10 -1 - 10 - 100 IC - Collector Current - mA IC = 10・IB - 0.1 - 0.01 -1 TA = −25°C 25°C 75°C -1 - 0.1 -1 - 10 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = 75°C 25°C −25°C - 1000 - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 VCE = −0.2 V - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 VCE = −5.0 V TA = 75°C - 100 25°C −25°C - 10 - 100 -1 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 VIN - Input Voltage - V IC - Collector Current - mA RESISTOR vs. AMBIENT TEMPERATURE 50 R - Resistor - kΩ 40 30 20 10 0 -25 0 25 50 75 100 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 15 FN4xxx [FN4L4Z] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −160 µ A −140 −120 −100 −40 −30 −80 −60 −20 −40 −20 −10 0 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 10.0 V - 0.4 VIN = 5.0 V - 0.3 15.0 V - 0.2 - 0.1 0 0 TA = 75°C 25°C −25°C 100 10 -1 - 10 - 100 IC - Collector Current - mA -1 IC = 10･IB - 0.01 -1 - 0.1 -1 - 10 - 10 - 100 100 R - Resistor - kΩ 80 60 40 20 0 50 75 100 TA - Ambient Temperature - °C 16 TA = 75°C −25°C 25°C -1 - 0.2 - 0.4 - 0.6 VIN - Input Voltage - V RESISTOR vs. AMBIENT TEMPERATURE 25 VCE = −5.0 V - 100 IC - Collector Current - mA 0 - 100 COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C -1 - 10 IC - Collector Current - mA - 1000 - 10 -25 TA = 75°C 25°C −25°C - 0.1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 VCE = −0.2 V - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS - 0.8 -1 FN4xxx [FN4F3M] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IB = −450 µ A −40 −350 −30 −20 −250 −10 0 −150 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 - 0.4 VIN = 5.0 V - 0.3 10.0 V - 0.2 - 0.1 15.0 V 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA -1 - 0.1 -1 TA = 75°C 25°C −25°C - 0.1 - 0.01 -1 - 10 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 100 IC = 10・IB - 1000 VCE = −0.2 V - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 VCE = −5.0 V TA = 75°C - 100 25°C - 10 - 100 −25°C -1 0 - 0.2 - 0.4 - 0.6 - 0.8 - 1 - 1.2 - 1.4 - 1.6 - 1.8 - 2 VIN - Input Voltage - V IC - Collector Current - mA RESISTOR vs. AMBIENT TEMPERATURE 5 R - Resistor - kΩ 4 3 2 1 0 -40 -20 0 20 40 60 80 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 17 FN4xxx [FN4F3P] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 IB = −300 µ A −40 −250 −200 −30 −150 −20 −100 −10 0 −50 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 - 0.4 VIN = 5.0 V - 0.3 10.0 V - 0.2 15.0 V - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA - 0.1 TA = 75°C 25°C −25°C - 0.01 -1 -1 - 0.1 -1 - 10 - 100 R - Resistor - kΩ 12 R2 8 6 R1 2 0 -20 0 20 40 60 80 TA - Ambient Temperature - °C 18 25°C −25°C -1 0 - 0.2 - 0.4 - 0.6 VIN - Input Voltage - V 14 -40 TA = 75°C - 10 RESISTOR vs. AMBIENT TEMPERATURE 4 - 100 VCE = −5.0 V - 100 IC - Collector Current - mA 10 - 10 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V TA = −25°C 25°C 75°C - 100 IC = 10･IB - 1000 - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 VCE = −0.2 V - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS - 0.8 -1 FN4xxx [FN4F3R] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 IB = −300 µ A −40 −250 −200 −30 −150 −20 −100 −10 0 COLLECTOR TO EMITTER VOLTAGEvs. COLLECTOR CURRENT VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE −50 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V - 0.5 - 0.4 VIN = 5.0 V - 0.3 10.0 V - 0.2 - 0.1 15.0 V 0 0 VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V 100 TA = 75°C 25°C −25°C 1 - 10 - 100 IC - Collector Current - mA IC - Collector Current - µA VIN - Input Voltage - V TA = 75°C 25°C −25°C - 0.1 - 0.01 -1 -1 - 0.1 - 10 - 10 - 100 IC - Collector Current - mA COLLECTOR CURRENT vs. INPUT VOLTAGE TA = −25°C 25°C 75°C -1 - 100 IC = 10・IB - 1000 VCE = −0.2 V - 10 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT 1000 -1 - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 10 - 20 VCE = −5.0 V TA = −25°C - 100 25°C - 10 75°C -1 0 - 100 - 0.2 - 0.4 - 0.6 - 0.8 -1 VIN - Input Voltage - V IC - Collector Current - mA RESISTOR vs. AMBIENT TEMPERATURE 70 5 R1 - Resistor - kΩ R2 50 3 40 R1 30 2 20 1 10 R1 - Resistor - kΩ 60 4 0 0 -40 -20 0 20 40 60 80 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 19 FN4xxx [FN4A4L] TYPICAL CHARACTERISTICS (TA = 25°C) IC - Collector Current - mA −50 COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IB = −350 µ A −300 −40 −250 −30 −200 −20 −150 −100 −10 −50 0 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 10.0 V - 0.3 - 0.2 15.0 V - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA TA = −25°C 25°C 75°C -1 - 0.1 - 10 - 0.1 - 0.01 -1 - 100 R - Resistor - kΩ 8 R2 4 2 0 40 60 80 TA - Ambient Temperature - °C 20 25°C -1 -1 - 1.2 - 1.4 - 1.6 - 1.8 -2 VIN - Input Voltage - V R1 20 75°C - 10 10 0 TA = −25°C - 100 14 -20 - 100 VCE = −5.0 V RESISTOR vs. AMBIENT TEMPERATURE -40 - 10 IC - Collector Current - mA IC - Collector Current - mA 6 IC = 10・IB TA = 75°C 25°C −25°C COLLECTOR CURRENT vs. INPUT VOLTAGE IC - Collector Current - µA VIN - Input Voltage - V - 10 12 - 100 - 1000 VCE = −0.2 V -1 - 80 -1 INPUT VOLTAGE vs. COLLECTOR CURRENT - 100 - 60 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V - 40 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 - 20 Data Sheet D16491EJ2V0DS - 2.2 - 2.4 - 2.6 FN4xxx [FN4L4K] TYPICAL CHARACTERISTICS (TA = 25°C) COLLECTOR TO EMITTER VOLTAGE vs. COLLECTOR CURRENT IC - Collector Current - mA −50 −300 −250 IB = −350 µ A −40 −200 −30 −150 −20 −100 −10 0 −50 −2 0 −4 −6 −8 −10 VCE - Collector to Emitter Voltage - V VCE - Collector to Emitter Voltage - V COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE - 0.5 VIN = 5.0 V - 0.4 - 0.3 - 0.2 15.0 V - 0.1 0 0 100 TA = 75°C 25°C −25°C 10 1 -1 - 10 - 100 IC - Collector Current - mA - 15 - 20 - 25 - 30 - 35 - 40 -1 IC = 10･IB - 0.1 TA = 75°C 25°C −25°C - 0.01 -1 - 10 - 100 IC - Collector Current - mA INPUT VOLTAGE vs. COLLECTOR CURRENT COLLECTOR CURRENT vs. INPUT VOLTAGE - 100 - 1000 IC - Collector Current - µA VCE = −0.2 V VIN - Input Voltage - V - 10 COLLECTOR SATURATION VOLTAGE vs. COLLECTOR CURRENT VCE(sat) - Collector Saturation Voltage - V hFE - DC Current Gain VCE = −5.0 V -5 IC - Collector Current - mA DC CURRENT GAIN vs. COLLECTOR CURRENT 1000 10.0 V - 10 TA = −25°C 25°C 75°C -1 - 0.1 -1 - 10 TA = −25°C - 100 - 10 - 100 75°C 25°C VCE = −5.0 V -1 -2 - 2.4 - 2.8 - 3.2 - 3.6 -4 - 4.4 - 4.8 VIN - Input Voltage - V IC - Collector Current - mA RESISTOR vs. AMBIENT TEMPERATURE 70 R - Resistor - kΩ 60 R1 50 40 30 20 R2 10 0 -40 -20 0 20 40 60 80 TA - Ambient Temperature - °C Data Sheet D16491EJ2V0DS 21 FN4xxx • The information in this document is current as of February, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1