CD42__90B CD47__90B POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A C F G H 3 B 45 67 2 1 T J K "U" THREAD "S" FASTON TAB L D M P Q Features: Features: N 4 5 1 2 ~ 3 - + 7 2 ~ Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized (E78240) CD42 6 1 CD42__90B, CD47__90B Dual SCR/Diode Isolated POW-R-BLOKTM Module 90 Amperes / Up to 1800 Volts 3 - + Benefits: CD47 CONNECTION DIAGRAM Ordering Information: CD42, CD47 Outline Dimensions Dimension Inches Millimeters A 3.66 93 B 0.79 20 C 3.15 80 D 1.18 30 F 0.61 15.5 G 0.79 20 H 0.79 20 J 0.16 4 K 0.22 5.7 L 0.59 15 M 1.10 28 N 0.31 8 P 0.94 24 Q 1.16 29.4 S 0.11 x .03 2.8 x 0.8 T 0.25 6.4 U M5 M5 Select the complete nine digit module part number from the table below. Example: CD421690B is a 1600Volt, 90 Ampere Dual SCR/Diode Isolated POW-R-BLOKTM Module Type CD42 CD47 Voltage Current Volts Amperes (x100) 08 12 14 16 18 90 Version B No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. Revision Date: 04/28/2009 CD42__90B CD47__90B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180° Conduction, TC=85°C IT(RMS) 150 A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180° Conduction, TC=85°C IT(AV) 95 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1570 A 60 Hz, No VRRM reapplied, Tj=125°C ITSM 1870 A 60 Hz, No VRRM reapplied, Tj=25°C ITSM 2100 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1500 A 50 Hz, No VRRM reapplied, Tj=125°C ITSM 1785 A 50 Hz, No VRRM reapplied, Tj=25°C ITSM 2000 A 8.3 ms, 100% VRRM reapplied, Tj=125°C It 2 It 2 10,270 14,520 A sec 2 A sec It 2 18,300 A sec 2 It 11,250 A sec 2 It 15,910 A sec 2 It 20,000 A sec di/dt 150 A/µs 8.3 ms, No VRRM reapplied, Tj=125°C 8.3 ms, No VRRM reapplied, Tj=25°C 10 ms, 100% VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=25°C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Operating Temperature Tj=25°C Storage Temperature 2 2 2 TJ -40 to +125 °C -40 to +125 °C 25 3 44 5 95 in.-Lb. Nm in.-Lb. Nm g 3.35 oz. 3000 3500 V V Module Weight, Typical 50 – 60 Hz, 1 minute 50 – 60 Hz, 1 second 2 Tstg Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink V Isolation @ 25C Circuit to base, all terminals shorted together 2 Vrms Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 CD42__90B CD47__90B POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1800V, TJ=125°C 20 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1800V, TJ=125°C 20 mA V TM / VFM ITM / IFM =300A 1.65 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) 0.9 2.0 V mΩ Minimum dV/dt dV/dt Tj=125°C, Up to 800V Tj=125°C, 1200 - 1800V 500 V/µs 1000 V/µs 40 - 100 Peak On-State Voltage Turn-Off Time (Typical) t off TJ = 25°C Gate Trigger Current IGT Tj= 25°C, VD=6V, Resistive Load Gate Trigger Voltage VGT Non-Triggering Gate Voltage VGDM Non-Triggering Gate Current Min. Max. Units (Typical) µs 150 mA Tj= 25°C, VD=6V, Resistive Load 3.0 Volts Tj=125°C, VD=VDRM 0.25 Volts IGDM Tj=125°C, VD=VDRM 6 mA Holding Current IH TJ = 25°C 250 mA Latching Current IL TJ = 25°C 600 mA Thermal Characteristics Characteristics Max. Units Thermal Resistance, Junction to Case DC Operation Symbol RΘJ-C Per Module, both conducting Per Junction, both conducting 0.14 0.28 °C/W °C/W Thermal Resistance, Case to Sink Lubricated RΘC-S Per Module 0.1 °C/W Revision Date: 04/28/2009 CD42__90B CD47__90B POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 °C ) (Junction to Case) 0.30 4 Thermal Impedance - Rjc - °C/W 0.25 3 2.5 2 1.5 1 0.20 0.15 0.10 0.05 0.5 0 10 100 0.00 0.001 1000 0.01 0.1 Instantaneous On-State Current - Itm / Ifm - Amperes 10 100 Maximum Allowable Case Temperature (Sinusoidal Waveform) (Sinusoidal Waveform) 140 125 130 180° 120 120 120° 110 Max. Case Temperature - Tcase -°C Max. Power Dissipation Per Junction - Watts 1 Time - t - Seconds Maximum On-State Power Dissipation 90° 100 60° 90 30° 80 15° 70 60 50 40 30 180 0 360 CONDUCTION ANGLE 20 115 180 0 110 360 CONDUCTION ANGLE 105 100 15° 95 30° 60° 90° 90 10 120° 180° 85 0 0 10 20 30 40 50 60 70 80 90 0 100 10 20 30 Average On-State Current - It/If(av) - Amperes 50 60 70 80 90 100 Maximum Allowable Case Temperature (Rectangular Waveform) 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 40 Average On-State Current - It/If(av) - Amperes Maximum On-State Power Dissipation (Rectangular Waveform) 125 270° 180° 120° 90° 60° 30° 0 180 120 360° Max. Case Temperature - Tcase -°C Max. Power Dissipation Per Junction - Watts On-State Voltage - Vtm / Vfm - Volts 3.5 360 CONDUCTION ANGLE 115 180 0 110 360 CONDUCTION ANGLE 105 100 95 30° 90 60° 85 90° 120° 180° 80 270° 360° 75 0 10 20 30 40 50 60 70 80 90 100 110 120 Average On-State Current - It/If(av) - Amperes 130 140 150 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Average On-State Current - It/If(av) - Amperes Revision Date: 04/28/2009