752 SMX‐2 Series 7.0 x 5.0mm Crystal unit RoHS & REACH compliant Wide frequency range Excellen stability range Parameters Specification Frequency Range Remarks F_nom 6.0MHz ~ 125.0MHz Frequency Tolerance F_tol ±30.0ppm ~ ±50.0ppm Frequency stability over operating temperature range F_stb ±10.0ppm ~ ±50.0ppm Table 2 Operating Temperature Range T_use 0°C ~ +50°C to ‐40°C ~ +85°C Table 2 Storage temperature T_stg ‐40°C ~ +85°C Load capacitance CL Equivalent Series Resistance ESR Table 1 Shunt capacitance C0 5.0pF max Drive level DL 300μW max Frequency Aging 8.0pF ~ 30.0pF, series F_age ±5.0ppm / year max Moisture sensitivity level MSL 1 (unlimited) Electrostatic discharge ESD Not applicable Insulation resistance IR At 100V DC 500MΩ min Dimensions (mm) 1.15 2 1 7.0±0.2 2.0 5.0±0.2 4.5 2.40 1.2 max 1.55 5.65 Table 1. Frequency range (MHz) vs ESR Table 2 Frequency Stability vs Temperature Temp. (°C) 6.0MHz ~ 8.000MHz (Fundamental) 150Ω 8.0MHz ~ 9.000MHz (Fundamental) 100Ω 9.0MHz ~ 10.000MHz (Fundamental) 60Ω 0°C ~ 50°C stability in ppm ±10 ±15 ±20 ±30 ±50 ±100 √ √ √ √ √ √ 10.0MHz ~ 11.000MHz (Fundamental) 50Ω ‐10°C ~ 60°C √ √ √ √ √ 11.0MHz ~ 13.000MHz (Fundamental) 40Ω ‐20°C ~ 70°C √ √ √ √ √ 13.0MHz ~ 50.000MHz (Fundamental) 30Ω ‐40°C ~ 85°C √ √ √ 26.0MHz ~ 125.000MHz (3 overtone) 100Ω ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification 752 SMX‐2 Series 7.0 x 5.0mm Crystal unit Part number generation CJ 2700 G K L ACT Series Code Frequency (MHz) Frequency Tolerance (±ppm) Frequency stability over temperature range (±ppm) CJ 8MHz = 0800 27MHz = 2700 ±10 = E ±15 = F ±20 = G ±25 = H ±30 = I ±50 = L ±10 = F ±15 = G ±20 = I ±30 = K ±50 = O ±100 = V Note: Use the first 4 characters of the frequency in Hz i.e. 27MHz =27000000Hz GO Operating Temperature Range (°C) Load capacitance (CL ‐pF) 0 ~ +50 = A ‐10 ~ +60 = E ‐20 ~ +70 = G ‐30 ~ +85 = L ‐40 ~ +85 = M 8 = GO 9 = JO 10 = KO 12 = OO 13 = YO 14 = ZO 16 = RO 18 = TO 20 = VO 22 = WO 30 = DA Series = SR If the frequency is 100MHz or higher then the first 5 characters are used F L ‐PF Frequency mode Packaging (Tape & Reel) RoHS Fundamental = Loose = L F 1000pcs = C 3 Overtone = A Note: It is important to suffix the above part number with full frequency required to give a completed part number as illustrated below. Full Example Part Number : CJ2700GKLGOFL‐PF [27.000MHz] , CJ2457GKLGOFL‐PF [24.576MHz] Solder Reflow Profile Additional information Drawing control: (Internal use only) Commodity code: 854160 00 00 Issue number: 1 Date: 1/02/2017 Internal reference: H3 ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification RoHS = ‐pF