MVBH Series – 8 Pin DIP HCMOS VCXO ELECTRICAL SPECIFICATIONS: ¾ Industry Standard Package ¾ +2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage ¾ HCMOS Output ¾ RoHS Compliant Available Supply Voltage (Vdd) Frequency Range Frequency Stability (Inclusive of Temp., Load, Voltage and Aging) Operating Temp.Range Storage Temp. Range Supply Current Load Output Logic “0” Logic “1” Symmetry (50% of waveform) Rise / Fall Time (10% to 90%) Start Time Control Voltage Linearity Pullability +2.5VDC ±10% +5.0VDC ±10% (See Part Number Guide for Options) 60mA max 15pF 1.25 VDC ±1.00 VDC ENVIRONMENTAL/MECHANICAL SPECIFICATIONS: Shock Solderability Vibration Gross Leak Test Fine Leak Test +3.3DC ±10% 1.000MHZ TO 220.000MHZ MIL-STD-883, Meth 2002, Cond MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond MIL-STD-883, Meth 1014, Cond MIL-STD-883, Meth 1014, Cond (See Part Number Guide for Options) -55°C to +125°C 60mA max 30pF HCMOS 10% Vdd max 90% Vdd min 40%/60% 10nSec max 10mSec max 1.65 VDC ±1.50 VDC (See Part Number Guide for Options) (See Part Number Guide for Options) 85mA max 30pF 2.50 VDC ±2.00 VDC MARKING DETAIL: Line 1 = MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots B A C A MECHANICAL DIMENSIONS: 12.90 [.508] MAX MXXXXX SYYMML XXXXX 5.50 [.217] MAX 7.62 [.300] 5.33 [.210] 5 8 4 1 12.90 [.508] MAX 7.62 [.300] DONOTES PIN 1 .90 [.035] MAX PIN PIN PIN PIN PIN CONNECTIONS 1 CONTROL VOLTAGE 4 CASE GROUND 5 OUTPUT 8 SUPPLY VOLTAGE DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PART NUMBERING GUIDE: MVB Frequency H 8 Pin DIP VCXO Supply Voltage Output H = HCMOS RoHS Compliant Blank = Not Compliant F = is Compliant 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 010 = ±10 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Pullability A = ±200 ppm min C = ±100 ppm min D = ±50 ppm min P = ±25 ppm min Linearity Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision MVBH040808C