Diode Semiconductor Korea MURS340--- MURS360 VOLTAGE RANGE: 400 --- 600 V CURRENT: 3.0 A SURFACE MOUNT RECTIFIERS FEATURES Low cost Low leakage Low forward voltage drop High current capability Easily cleaned with Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 DO-214AB(SMC) 3.1± 0.25 5. 9 ± 0. 25 6.9± 0.25 2. 3 ± 0. 15 7.8± 0. 2 1. 3± 0. 25 0.25± 0.06 0.203MAX MECHANICAL DATA Case:JEDEC DO-214AB,molded plastic Terminals: Solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.007 ounces, 0.21 gram Mounting position: Any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. MURS340 MURS360 UNITS Maximum recurrent peak reverse voltage VRRM 400 600 V Maximum RMS voltage VRMS VDC 420 600 V Maximum DC blocking voltage 280 400 Maximum average forw ard rectified current @TL=130 V IF(AV) 3.0 A IFSM 125 A t rr 50 ns Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ=125 Typical reverse recovery time (Note1) Maximum reverse current at rated DC blocking voltage @TJ=25 @T J=150 IR Maximum instantaneous forw ard voltage at 3.0 A Typical thermal resistance (Note2) Operating junction temperature range Storage temperature range 10 250 VF 1.25 RθJL 11 TJ - 55 ---- + 150 TSTG - 55 ---- + 150 A V ／W NOTE: 1. Measured with I F =0.5A, I R=1A, I rr=0.25A. 2. Junction to lead. www.diode.kr Diode Semiconductor Korea MURS340 - - - MURS360 INSTANTANEOUS REVERSE LEAKAGE CURRENT 100 10 TJ=25 Pulse Width=300uS 4 2 1.0 AMPERES 0.4 0.2 0.1 0.06 0.04 0.02 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FIG.2 -- TYPICAL REVERSE LEAKAGE CHARACTERISTICS 10000 1000 O TJ=125 C 100 O TJ=75 C 10 TJ=25OC 1.0 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.3 -- PEAK FORWARD SURGE CURRENT FIG.4 -- FORWARD DERATING CURVE TJ=125 8.3ms Single Half Sine-Wave 62.5 0 1 2 4 8 10 20 NUMBER OF CYCLES AT 60Hz 40 60 80 100 AVERAGE FORWARD CURRENT AMPERES INSTANTANEOUS FORWARD VOLTAGE,VOLTS 125 AMPERES PEAK FORWARD SURGE CURRENT INSTANTANEOUS FORWARD CURRENT FIG.1 -- TYPICAL FORWARD CHARACTERISTIC 3.6 3.0 2.4 1.8 1.2 Single Phase Half Wave 60H Z Resistive or Inductive Load 0.6 0 25 50 75 100 125 150 175 LEAD TEMPERATURE, www.diode.kr