Vishay LPE3325ER470NU Surface mount transformers/inductor Datasheet

LPE-3325
Vishay Dale
Surface Mount Transformers/Inductors,
Gapped and Ungapped, Custom Configurations Available
FEATURES
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
ELECTRICAL SPECIFICATIONS
Inductance Range: 10 μH to 3900 μH, measured
at 0.10 VRMS at 10 kHz without DC current, using an
HP 4263A or 4284A impedance analyzer
DC Resistance Range: 0.06  to 18.0 , measured at
+ 25 °C ± 5 °C
Rated Current Range: 1.00 A to 0.06 A
Dielectric Withstanding Voltage: 500 VRMS, 60 Hz, 5 s
STANDARD ELECTRICAL SPECIFICATIONS
GAPPED MODELS (B)
UNGAPPED MODELS (A)
SATURATING CURRENT
IND.
IND.
SCHEMATIC DCR MAX.
MAX. RATED DC CURRENT
(A) (2)
MODEL
(μH)
TOL.
LETTER
()
(A) (1)
LPE3325ER100NU
10
± 30 %
A
0.06
1.01
N/A
LPE3325ER150NU
15
± 30 %
A
0.08
0.91
N/A
LPE3325ER220NU
22
± 30 %
A
0.09
0.83
N/A
LPE3325ER330NU
33
± 30 %
A
0.11
0.75
N/A
LPE3325ER470NU
47
± 30 %
A
0.14
0.69
N/A
LPE3325ER680NU
68
± 30 %
A
0.16
0.63
N/A
LPE3325ER101NU
100 ± 30 %
A
0.20
0.57
N/A
LPE3325ER151NU
150 ± 30 %
A
0.76
0.29
N/A
LPE3325ER221NU
220 ± 30 %
A
0.92
0.26
N/A
LPE3325ER331NU
330 ± 30 %
A
1.13
0.24
N/A
LPE3325ER471NU
470 ± 30 %
A
1.35
0.22
N/A
LPE3325ER681NU
680 ± 30 %
A
1.62
0.20
N/A
LPE3325ER102NU
1000 ± 30 %
A
1.97
0.18
N/A
LPE3325ER152NU
1500 ± 30 %
A
2.41
0.16
N/A
LPE3325ER222NU
2200 ± 30 %
A
3.00
0.15
N/A
LPE3325ER332NU
3300 ± 30 %
A
5.96
0.10
N/A
LPE3325ER392NU
3900 ± 30 %
A
7.00
0.10
N/A
LPE3325ER100MG
10
± 20 %
A
0.22
0.54
1.480
LPE3325ER150MG
15
± 20 %
A
0.27
0.48
1.240
LPE3325ER220MG
22
± 20 %
A
0.42
0.39
1.050
LPE3325ER330MG
33
± 20 %
A
0.65
0.31
0.872
LPE3325ER470MG
47
± 20 %
A
0.97
0.26
0.740
LPE3325ER680MG
68
± 20 %
A
1.45
0.21
0.622
LPE3325ER101MG
100 ± 20 %
A
2.22
0.17
0.518
LPE3325ER151MG
150 ± 20 %
A
3.55
0.13
0.426
LPE3325ER221MG
220 ± 20 %
A
4.31
0.12
0.354
LPE3325ER331MG
330 ± 20 %
A
6.72
0.10
0.290
LPE3325ER471MG
470 ± 20 %
A
9.83
0.08
0.244
LPE3325ER681MG
680 ± 20 %
A
14.8
0.07
0.204
LPE3325ER102MG
1000 ± 20 %
A
18.0
0.06
0.169
Notes
(1) DC current that will create a maximum temperature rise of 30 °C when applied at + 25 °C ambient.
(2) DC current that will typically reduce the initial inductance by 20 %.
• UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and
line coupling devices.
GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than
ungapped models. Beneficial in DC/DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range.
DESCRIPTION
LPE
3325
1000 μH
± 30 %
A
ER
e2
MODEL
SIZE
INDUCTANCE VALUE
INDUCTANCE TOLERANCE
CORE
PACKAGE CODE
JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
L
P
E
PRODUCT FAMILY
3
3
2
SIZE
5
E
R
PACKAGE CODE
1
0
2
INDUCTANCE VALUE
N
U
TOL.
CORE
Note
• Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB).
Document Number: 34063
Revision: 24-Feb-11
For technical questions, contact: [email protected]
www.vishay.com
1
LPE-3325
Surface Mount Transformers/Inductors,
Gapped and Ungapped, Custom Configurations Available
Vishay Dale
DIMENSIONS in inches [millimeters]
Pad Layout
SCHEMATIC (top view)
0.056 [1.42]
Pad Dimensions Typical,
6 places
Schematic A
0.073 [1.85]
0.042
[1.07]
Typical
two
places
0.232
[5.89]
0.288
[7.32]
Reference Only
Dimensional
4
Outline
0.256 [6.50]
3
5
2
6
1
Note
• Schematic A for both gapped and ungapped LPE series
3
ENVIRONMENTAL PERFORMANCE
Max.
1
6
4
Clip Opening
Opposite Pin 1
0.205 [5.21]
Max.
0.323 [8.20]
Max.
0.268
[6.81]
0.028
[0.71]
0.073 [1.85]
Typ.
TEST
CONDITIONS
Thermal Cycling
Withstands - 55 °C to + 125 °C
Operating
Temperature
- 55 °C to + 125 °C (1)
High Humidity
85 %
Soldering Heat
Tested to + 230 °C
Mechanical Shock
Per MIL-STD-202, method 213 (100G)
Vibration
Per MIL-STD-202, method 204 (20G)
Solderability
Per industry standards
Note
(1) Must be checked in end use application
PART MARKING
- Vishay Dale
0.028 [0.71]
Footprint Diagram
- Date code
Notes
• Pad layout guidelines per MIL-STD-275E (printed wiring for
electronic equipment).
• Tolerances: xx ± 0.01" [± 0.25 mm]; xxx ± 0.005" [± 0.12 mm].
- Marking code (suffix of model #)
- Pin 1 indicator
PACKAGING
STANDARDS: All embossed carrier tape packaging will be
accomplished in compliance with latest revision of EIA-481
“Taping of Surface Mount Components for Automatic
Placement”.
TAPE SPECIFICATIONS:
Carrier Tape Type: Conductive
Cover Tape Type: Anti-static
Cover Tape Adhesion to Carrier: 40 g ± 30 g
REEL SPECIFICATIONS:
Diameter (flange): 13" [330.2 mm]
Maximum Width (over flanges): 1.197" [30.4 mm]
MODEL
TAPE
WIDTH
COMPONENT
PITCH
UNITS PER 13"
REEL
LPE-3325
24 mm
12 mm
1000
Tape and Reel Orientation
Pin 1
Indicator
Cover Tape
Carrier Tape
Label Area
USER DIRECTION OF FEED
Embossed Cavity
Note
• Top view shown with cover tape removed
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 34063
Revision: 24-Feb-11
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages