® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 REVISION HISTORY Revision Rev. 0.1 Rev. 0.2 Rev. 0.3 Rev. 0.4 Rev. 0.5 Rev. 0.6 Rev. 1.0 Description Initial Issue Added ISB Spec. Revised FEATURES & ORDERING INFORMATION Lead free and green package available to Green package available Added packing type in ORDERING INFORMATION Deleted TSOLDER in ABSOLUTE MAXIMUN RATINGS Revised VDR Revised ORDERING INFORMATION in page 11 Deleted E grade Revised ISB1 in page 3 Revised Notes item 1 and 2 in page 4 Issue Date Oct.14.2007 Feb.1.2008 May.20.2009 Sep.11.2009 Aug.30.2010 Apr.12.2011 Aug.29.2013 1. VIH(max) = VCC + 2.0V for pulse width less than 6ns. 2. VIL(min) = VSS - 2.0V for pulse width less than 6ns. Rev. 1.1 Rev. 1.2 Revised ORDERING INFORMATION Revised VIL(max) from 0.6V to 0.8V Deleted WRITE CYCLE Notes : 1.WE#,CE#, LB#, UB# must be high during all address transitions. In page 8 Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 0 May 8.2014 Jun.29.2016 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 FEATURES GENERAL DESCRIPTION Fast access time : 55/70ns Low power consumption: Operating current : 45/30mA (TYP.) Standby current : 8μA (TYP.) LL-version Single 4.5V ~ 5.5V power supply All inputs and outputs TTL compatible Fully static operation Tri-state output Data byte control : LB# (DQ0 ~ DQ7) UB# (DQ8 ~ DQ15) Data retention voltage : 1.5V (MIN.) Green package available Package : 44-pin 400 mil TSOP-II 48-ball 6mm x 8mm TFBGA The LY6251216 is a 8,388,608-bit low power CMOS static random access memory organized as 524,288 words by 16 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The LY6251216 is well designed for low power application, and particularly well suited for battery back-up nonvolatile memory application. The LY6251216 operates from a single power supply of 4.5V ~ 5.5V and all inputs and outputs are fully TTL compatible PRODUCT FAMILY Product Family LY6251216 LY6251216(I) Operating Temperature 0 ~ 70℃ -40 ~ 85℃ Vcc Range Speed 4.5 ~ 5.5V 4.5 ~ 5.5V 55/70ns 55/70ns FUNCTIONAL BLOCK DIAGRAM PIN DESCRIPTION Vcc Vss A0-A18 DQ0-DQ7 Lower Byte DQ8-DQ15 Upper Byte CE# WE# OE# LB# UB# Power Dissipation Standby(ISB1,TYP.) Operating(Icc,TYP.) 8µA(LL) 45/30mA 8µA(LL) 45/30mA SYMBOL DESCRIPTION A0 - A18 Address Inputs DQ0 – DQ15 Data Inputs/Outputs DECODER I/O DATA CIRCUIT 512Kx16 MEMORY ARRAY CE# Chip Enable Input WE# Write Enable Input OE# Output Enable Input LB# Lower Byte Control UB# Upper Byte Control VCC Power Supply VSS Ground COLUMN I/O CONTROL CIRCUIT Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 1 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 PIN CONFIGURATION A LB# OE# A0 A1 B DQ8 UB# A3 A4 CE# DQ0 C DQ9 DQ10 A5 A6 DQ1 DQ2 D Vss DQ11 A17 A7 DQ3 Vcc E Vcc DQ12 NC A16 DQ4 Vss F DQ14 DQ13 A14 A15 DQ5 DQ6 G DQ15 NC A12 A13 WE# DQ7 A10 H A18 A8 A9 1 2 3 4 TFBGA A2 NC A11 NC 5 6 Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 2 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 ABSOLUTE MAXIMUN RATINGS* PARAMETER Voltage on VCC relative to VSS Voltage on any other pin relative to VSS SYMBOL VT1 VT2 Operating Temperature TA Storage Temperature Power Dissipation DC Output Current TSTG PD IOUT RATING -0.5 to 6.5 -0.5 to VCC+0.5 0 to 70(C grade) -40 to 85(I grade) -65 to 150 1 50 UNIT V V ℃ ℃ W mA *Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability. TRUTH TABLE MODE Standby Output Disable Read Write Note: CE# OE# H X L L L L L L L L X X H H L L L X X X WE# LB# X X H H H H H L L L X H L X L H L L H L I/O OPERATION DQ0-DQ7 DQ8-DQ15 High – Z High – Z High – Z High – Z High – Z High – Z High – Z High – Z DOUT High – Z DOUT High – Z DOUT DOUT DIN High – Z DIN High – Z DIN DIN UB# X H X L H L L H L L H = VIH, L = VIL, X = Don't care. Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 3 SUPPLY CURRENT ISB,ISB1 ICC,ICC1 ICC,ICC1 ICC,ICC1 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 DC ELECTRICAL CHARACTERISTICS SYMBOL TEST CONDITION PARAMETER Supply Voltage VCC *1 Input High Voltage VIH *2 Input Low Voltage VIL Input Leakage Current ILI VCC ≧ VIN ≧ VSS Output Leakage VCC ≧ VOUT ≧ VSS ILO Current Output Disabled Output High Voltage VOH IOH = -1mA Output Low Voltage VOL IOL = 2mA Cycle time = Min. - 55 CE# = VIL, ICC II/O = 0mA - 70 Average Operating Other pins at VIL or VIH Power supply Current Cycle time = 1µs ICC1 CE#≦0.2V, II/O = 0mA Other pins at 0.2V or VCC-0.2V CE# = VIH ISB Other pins at VIL or VIH Standby Power -LL Supply Current CE# ≧VCC-0.2V ISB1 Other pins at 0.2V or VCC-0.2V -LLI MIN. 4.5 2.4 - 0.2 -1 TYP. 5.0 - *4 MAX. 5.5 VCC+0.3 0.8 1 UNIT V V V µA -1 - 1 µA 2.4 - - 0.4 V V - 45 60 mA - 30 50 mA - 6 12 mA - 0.2 2 mA - 8 30 µA - 8 50 µA Notes: 1. VIH(max) = VCC + 2.0V for pulse width less than 6ns. 2. VIL(min) = VSS - 2.0V for pulse width less than 6ns. 3. Over/Undershoot specifications are characterized, not 100% tested. 4. Typical values are included for reference only and are not guaranteed or tested. Typical values are measured at VCC = VCC(TYP.) and TA = 25℃ CAPACITANCE (TA = 25℃, f = 1.0MHz) PARAMETER Input Capacitance Input/Output Capacitance SYMBOL CIN CI/O MIN. - MAX 6 8 Note : These parameters are guaranteed by device characterization, but not production tested. AC TEST CONDITIONS Input Pulse Levels Input Rise and Fall Times Input and Output Timing Reference Levels Output Load 0.2V to VCC - 0.2V 3ns 1.5V CL = 30pF + 1TTL, IOH/IOL = -1mA/2mA Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 4 UNIT pF pF ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 AC ELECTRICAL CHARACTERISTICS (1) READ CYCLE PARAMETER Read Cycle Time Address Access Time Chip Enable Access Time Output Enable Access Time Chip Enable to Output in Low-Z Output Enable to Output in Low-Z Chip Disable to Output in High-Z Output Disable to Output in High-Z Output Hold from Address Change LB#, UB# Access Time LB#, UB# to High-Z Output LB#, UB# to Low-Z Output (2) WRITE CYCLE PARAMETER Write Cycle Time Address Valid to End of Write Chip Enable to End of Write Address Set-up Time Write Pulse Width Write Recovery Time Data to Write Time Overlap Data Hold from End of Write Time Output Active from End of Write Write to Output in High-Z LB#, UB# Valid to End of Write SYM. tRC tAA tACE tOE tCLZ* tOLZ* tCHZ* tOHZ* tOH tBA tBHZ* tBLZ* SYM. tWC tAW tCW tAS tWP tWR tDW tDH tOW* tWHZ* tBW LY6251216-55 MIN. MAX. 55 55 55 30 10 5 20 20 10 55 25 10 - LY6251216-70 MIN. MAX. 70 70 70 35 10 5 25 25 10 70 30 10 - UNIT LY6251216-55 MIN. MAX. 55 50 50 0 45 0 25 0 5 20 45 - LY6251216-70 MIN. MAX. 70 60 60 0 55 0 30 0 5 25 60 - UNIT *These parameters are guaranteed by device characterization, but not production tested. Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 5 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 TIMING WAVEFORMS READ CYCLE 1 (Address Controlled) (1,2) tRC Address tAA Dout tOH Previous Data Valid Data Valid READ CYCLE 2 (CE# and OE# Controlled) (1,3,4,5) tRC Address tAA CE# tACE LB#,UB# tBA OE# tOE tOH tOHZ tBHZ tCHZ tOLZ tBLZ tCLZ Dout High-Z Data Valid High-Z Notes : 1.WE#is high for read cycle. 2.Device is continuously selected OE# = low, CE# = low, LB# or UB# = low. 3.Address must be valid prior to or coincident with CE# = low, LB# or UB# = low transition; otherwise tAA is the limiting parameter. 4.tCLZ, tBLZ, tOLZ, tCHZ, tBHZ and tOHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. 5.At any given temperature and voltage condition, tCHZ is less than tCLZ , tBHZ is less than tBLZ, tOHZ is less than tOLZ. Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 6 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 WRITE CYCLE 1 (WE# Controlled) (1,2,4,5) tWC Address tAW CE# tCW tBW LB#,UB# tAS tWP tWR WE# tWHZ Dout TOW High-Z (4) tDW (4) tDH Data Valid Din WRITE CYCLE 2 (CE# Controlled) (1,4,5) tWC Address tAW CE# tAS tWR tCW tBW LB#,UB# tWP WE# tWHZ Dout High-Z (4) tDW tDH Data Valid Din Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 7 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 WRITE CYCLE 3 (LB#,UB# Controlled) (1,4,5) tWC Address tAW tWR CE# tAS tCW tBW LB#,UB# tWP WE# tWHZ Dout High-Z (4) tDW tDH Data Valid Din Notes : 1.A write occurs during the overlap of a low CE#, low WE#, LB# or UB# = low. 2.During a WE# controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be placed on the bus. 3.During this period, I/O pins are in the output state, and input signals must not be applied. 4.If the CE#, LB#, UB# low transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state. 5.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 8 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 DATA RETENTION CHARACTERISTICS PARAMETER SYMBOL TEST CONDITION VCC for Data Retention VDR CE#≧VCC - 0.2V VCC = 1.5V -LL CE# ≧VCC-0.2V Data Retention Current IDR Other pins at 0.2V or VCC-0.2V -LLI Chip Disable to Data See Data Retention tCDR Retention Time Waveforms (below) Recovery Time tR tRC* = Read Cycle Time MIN. 1.5 TYP. - MAX. 5.5 UNIT V - 5 30 µA - 5 50 µA 0 - - ns tRC* - - ns DATA RETENTION WAVEFORM Low Vcc Data Retention Waveform (1) (CE# controlled) VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR CE# VIH tR CE# ≧ Vcc-0.2V VIH Low Vcc Data Retention Waveform (2) (LB#, UB# controlled) VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR LB#,UB# VIH tR LB#,UB# ≧ Vcc-0.2V VIH Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 9 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 PACKAGE OUTLINE DIMENSION 44-pin 400mil TSOP-Ⅱ Package Outline Dimension SYMBOLS A A1 A2 b c D E E1 e L ZD y Θ DIMENSIONS IN MILLMETERS MIN. NOM. MAX. 1.20 0.05 0.10 0.15 0.95 1.00 1.05 0.30 0.45 0.12 0.21 18.212 18.415 18.618 11.506 11.760 12.014 9.957 10.160 10.363 0.800 0.40 0.50 0.60 0.805 0.076 o o o 3 6 0 DIMENSIONS IN MILS MIN. NOM. MAX. 47.2 2.0 3.9 5.9 37.4 39.4 41.3 11.8 17.7 4.7 8.3 717 725 733 453 463 473 392 400 408 31.5 15.7 19.7 23.6 31.7 3 o o o 0 3 6 Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 10 ® LY6251216 Rev. 1.2 512K X 16 BIT LOW POWER CMOS SRAM 48-ball 6mm × 8mm TFBGA Package Outline Dimension Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 11 ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 ORDERING INFORMATION Package Type Access Time (Speed)(ns) 44-Pin 400mil TSOP-II 55 Power Type Ultra Low Power Temperature Range(℃) 0℃~70℃ -40℃~85℃ 70 Ultra Low Power 0℃~70℃ -40℃~85℃ Packing Type Tray LY6251216ML-55LL Tape Reel LY6251216ML-55LLT Tray LY6251216ML-55LLI Tape Reel LY6251216ML-55LLIT Tray LY6251216ML-70LL Tape Reel LY6251216ML-70LLT Tray LY6251216ML-70LLI Tape Reel LY6251216ML-70LLIT Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 12 Lyontek Item No. ® LY6251216 512K X 16 BIT LOW POWER CMOS SRAM Rev. 1.2 ORDERING INFORMATION Package Type Access Time (Speed)(ns) 48-ball 6mmx8mm TFBGA 55 Power Type Ultra Low Power Temperature Range(℃) 0℃~70℃ -40℃~85℃ 70 Ultra Low Power 0℃~70℃ -40℃~85℃ Packing Type Tray LY6251216GL-55LL Tape Reel LY6251216GL-55LLT Tray LY6251216GL-55LLI Tape Reel LY6251216GL-55LLIT Tray LY6251216GL-70LL Tape Reel LY6251216GL-70LLT Tray LY6251216GL-70LLI Tape Reel LY6251216GL-70LLIT Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 13 Lyontek Item No. ® LY6251216 Rev. 1.2 512K X 16 BIT LOW POWER CMOS SRAM THIS PAGE IS LEFT BLANK INTENTIONALLY. Lyontek Inc. reserves the rights to change the specifications and products without notice. 2F, No.17, Industry E. Rd. II, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 14