Aluminum electrolytic capacitors Capacitors with screw terminals Series/Type: B43701, B43721 Date: December 2016 © EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Capacitors with screw terminals B43701, B43721 Standard 85 °C Long-life grade capacitors Applications Uninterruptible power supplies Frequency converters Features All-welded construction ensures reliable electrical contact RoHS-compatible B43701 Construction Charge-discharge proof, polar Aluminum case, insulated with PVC sleeve Version with PET insulation available upon request Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud Types with threaded stud are available with or without insulated base Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 17 B43721 B43701, B43721 Standard 85 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 350 ... 450 V DC 1.10 VR 1200 ... 12000 μF ±20% M Dissipation factor tan δ (20 °C, 120 Hz) ≤ 0.20 Leakage current Ileak (20 °C, 5 min) Self-inductance ESL d = 51.6 mm: approx. 15 nH d ≥ 64.3 mm: approx. 20 nH Useful life1) 85 °C; VR; IAC,R Requirements: > 5000 h ΔC/C ≤ 15% of initial value tan δ ≤ 1.75 times initial specified limit Ileak ≤ initial specified limit Voltage endurance test Post test requirements: 85 °C; VR 2000 h ΔC/C ≤ 10% of initial value tan δ ≤ 1.3 times initial specified limit Ileak ≤ initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm, acceleration max. 10 g, duration 3 × 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance Characteristics at low Z -25°C / Z 20°C 4 ratio at 100 Hz temperature Z -40°C / Z 20°C 17 IEC climatic category To IEC 60068-1: 25/085/56 (25 °C/+85 °C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 °C to +85 °C but the impedance at 40 °C must be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-810 IEC 60384-4 Ripple current capability Due to the ripple current capability of the contact elements, the following current upper limits must not be exceeded: Capacitor diameter 51.6 mm 64.3 mm 76.9 mm IAC,max 34 A 47 A 57 A 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 17 B43701, B43721 Standard 85 °C Dimensional drawings B43701 Ring clip/clamp mounting B43721 Threaded stud mounting For standard types with threaded stud the base is not insulated. Also refer to the mounting instructions in chapter "Capacitors with screw terminals Accessories". Screw terminals with UNF threads are available upon request. Dimensions and weights (Standard capacitors, without heat sink) Terminal Dimensions (mm) with insulating sleeve d l ±1 l1 ±1 l2 +0/1 d1 d2 max. a +0.2/0.4 M5 M5 M5 M5 M5 51.6 +0.5/1 80.7 51.6 +0.5/1 96.7 51.6 +0.5/1 105.7 51.6 +0.5/1 118.2 51.6 +0.5/1 130.7 87.2 103.2 112.2 124.7 137.2 17 17 17 17 17 M12 M12 M12 M12 M12 10.2 10.2 10.2 10.2 10.2 22.2 22.2 22.2 22.2 22.2 220 250 280 320 350 M5 M5 M5 M5 M5 M5 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 64.3 +0.5/1 80.7 96.7 105.7 118.2 130.7 143.2 87.2 103.2 112.2 124.7 137.2 149.7 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 13.2 13.2 13.2 13.2 13.2 13.2 28.5 28.5 28.5 28.5 28.5 28.5 370 400 440 510 600 630 M5 M5 M5 M5 M5 M5 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 76.9 +0.5/1 96.7 105.7 130.7 156.2 168.7 190.7 103.2 112.2 137.2 162.7 175.2 197.2 17 17 17 17 17 17 M12 M12 M12 M12 M12 M12 13.2 13.2 13.2 13.2 13.2 13.2 31.7 31.7 31.7 31.7 31.7 31.7 570 620 800 920 1000 1150 Tolerances of terminal thread respectively stud thread: Terminal thread M5: 6H Thread of stud M12: 6g Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 17 Approx. weight (g) B43701, B43721 Standard 85 °C Packing Capacitor diameter d (mm) 51.6 64.3 76.9 Length l (mm) all all ≤168.7 >168.7 Packing units (pcs.) 36 25 16 12 For ecological reasons the packing is pure cardboard. Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 17 B43701, B43721 Standard 85 °C Special design Insulated base Length l and l1 increase by +0.5 mm for types with threaded stud and insulated base. All other dimensions of the capacitor are identical with those of standard capacitors of this series. Please refer to the table "Dimensions and weights". Design options Design options Identification in third Remark block of ordering code Standard M000 Standard version without threaded stud: fully insulated with PVC Standard version with threaded stud: insulated with PVC sleeve, base not insulated Insulated base M008 For capacitors with threaded stud, fully insulated with PVC sleeve and PP disc Accessories The following items are included in the delivery package, but are not fastened to the capacitors: For terminals Thread Toothed washers Screws/nuts Maximum torque M5 DIN 7985 / ISO 7045-M5 × 10-5.6-Z 2.5 Nm thread depth t ≥ 8 mm For mounting M12 A 5.1 DIN 6797 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm The following items must be ordered separately. For details, refer to chapter "Screw terminals Accessories". Item Ring clips Clamps for capacitors with d ≥ 64.3 mm Insulating parts Please read Cautions and warnings and Important notes at the end of this document. Type B44030 B44030 B44020 Page 6 of 17 B43701, B43721 Standard 85 °C Overview of available types The capacitance and voltage ratings listed below are available in different case sizes upon request. Other voltage and capacitance ratings are also available upon request. VR (V DC) 350 400 450 Case dimensions d × l (mm) CR (μF) 51.6 × 80.7 1200 1500 51.6 × 80.7 51.6 × 96.7 1800 51.6 × 80.7 51.6 × 96.7 51.6 × 96.7 2200 51.6 × 96.7 51.6 × 105.7 64.3 × 80.7 51.6 × 118.2 64.3 × 96.7 2700 51.6 × 105.7 51.6 × 118.2 64.3 × 96.7 51.6 × 130.7 64.3 × 96.7 3300 51.6 × 118.2 64.3 × 96.7 64.3 × 96.7 64.3 × 105.7 3900 51.6 × 130.7 64.3 × 96.7 64.3 × 105.7 64.3 × 118.2 76.9 × 96.7 4700 64.3 × 105.7 64.3 × 130.7 76.9 × 96.7 64.3 × 143.2 76.9 × 105.7 5600 64.3 × 118.2 76.9 × 96.7 64.3 × 143.2 76.9 × 105.7 76.9 × 130.7 6800 64.3 × 143.2 76.9 × 105.7 76.9 × 130.7 76.9 × 156.2 8200 76.9 × 130.7 76.9 × 156.2 76.9 × 190.7 10000 76.9 × 156.2 76.9 × 168.7 76.9 × 190.7 12000 76.9 × 168.7 76.9 × 190.7 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 17 B43701, B43721 Standard 85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 350 V DC 51.6 × 80.7 1800 51.6 × 96.7 2200 51.6 × 105.7 2700 51.6 × 118.2 3300 64.3 × 96.7 3300 51.6 × 130.7 3900 64.3 × 96.7 3900 64.3 × 105.7 4700 64.3 × 118.2 5600 76.9 × 96.7 5600 6800 64.3 × 143.2 76.9 × 105.7 6800 76.9 × 130.7 8200 76.9 × 156.2 10000 76.9 × 168.7 12000 VR = 400 V DC 51.6 × 80.7 1500 51.6 × 96.7 1800 51.6 × 105.7 2200 64.3 × 80.7 2200 51.6 × 118.2 2700 64.3 × 96.7 2700 64.3 × 96.7 3300 64.3 × 105.7 3900 64.3 × 130.7 4700 76.9 × 96.7 4700 64.3 × 143.2 5600 76.9 × 105.7 5600 76.9 × 130.7 6800 76.9 × 156.2 8200 76.9 × 168.7 10000 76.9 × 190.7 12000 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 75 60 50 40 45 36 38 32 28 26 22 22 18 15 13 22 18 15 13 15 11 14 13 11 9.7 9.1 8.6 6.8 5.7 5.2 120 100 80 70 70 60 65 55 50 45 38 38 30 26 22 11.7 13.5 15.3 17.5 16.4 19.6 17.5 19.3 21.5 23.8 24.8 26.2 30.1 34.3 37.9 6.98 8.01 9.10 10.3 9.72 11.5 10.3 11.4 12.6 14.0 14.6 15.5 17.8 20.3 22.9 B437*1A4188M00# B437*1A4228M00# B437*1A4278M00# B437*1A4338M00# B437*1B4338M00# B437*1A4398M00# B437*1B4398M00# B437*1A4478M00# B437*1A4568M00# B437*1B4568M00# B437*1A4688M00# B437*1B4688M00# B437*1A4828M00# B437*1A4109M00# B437*1A4129M00# 80 65 55 60 45 45 40 34 28 28 24 24 20 16 14 12 24 19 16 20 14 16 15 13 11 10 9.4 9.0 7.1 5.9 5.3 4.7 130 110 90 95 75 80 70 60 50 50 40 40 32 28 24 20 11.3 12.8 14.6 13.7 16.7 15.8 17.1 18.8 21.8 23.1 24.2 25.4 29.3 33.3 37.2 41.8 6.59 7.49 8.50 8.00 9.73 9.18 9.93 10.9 12.6 13.4 14.0 14.7 17.0 19.3 22.1 24.8 B437*1A9158M00# B437*1A9188M00# B437*1A9228M00# B437*1B9228M00# B437*1A9278M00# B437*1B9278M00# B437*1A9338M00# B437*1A9398M00# B437*1A9478M00# B437*1B9478M00# B437*1A9568M00# B437*1B9568M00# B437*1A9688M00# B437*1A9828M00# B437*1A9109M00# B437*1A9129M00# Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. #= Design 0 = standard 8 = insulated base For details refer to "Design options" on page 6. Page 8 of 17 B43701, B43721 Standard 85 °C Technical data and ordering codes CR 100 Hz 20 °C μF Case dimensions d×l mm VR = 450 V DC 51.6 × 80.7 1200 51.6 × 96.7 1500 51.6 × 96.7 1800 51.6 × 118.2 2200 64.3 × 96.7 2200 51.6 × 130.7 2700 64.3 × 96.7 2700 64.3 × 105.7 3300 64.3 × 118.2 3900 76.9 × 96.7 3900 4700 64.3 × 143.2 76.9 × 105.7 4700 76.9 × 130.7 5600 76.9 × 156.2 6800 76.9 × 190.7 8200 76.9 × 190.7 10000 ESRtyp 100 Hz 20 °C mΩ ESRtyp 300 Hz 60 °C mΩ Zmax 10 kHz 20 °C mΩ IAC,max 100 Hz 60 °C A IAC,R 100 Hz 85 °C A Ordering code (composition see below) 95 75 65 50 55 45 45 38 32 32 26 26 22 18 15 13 26 22 19 15 17 13 16 14 12 11 9.9 9.4 7.6 6.3 5.2 4.9 150 120 100 85 85 70 75 65 55 50 45 45 36 30 26 22 9.82 11.3 12.6 14.6 14.0 16.8 15.4 17.2 19.1 20.9 22.0 23.1 26.3 29.9 34.1 37.8 5.36 6.22 6.91 8.00 7.66 9.18 8.38 9.37 10.4 11.3 11.9 12.6 14.3 16.3 19.1 21.0 B437*1A5128M00# B437*1A5158M00# B437*1A5188M00# B437*1A5228M00# B437*1B5228M00# B437*1A5278M00# B437*1B5278M00# B437*1A5338M00# B437*1A5398M00# B437*1B5398M00# B437*1A5478M00# B437*1B5478M00# B437*1A5568M00# B437*1A5688M00# B437*1A5828M00# B437*1A5109M00# Composition of ordering code * = Mounting style 0 = for capacitors with ring clip/clamp mounting 2 = for capacitors with threaded stud Please read Cautions and warnings and Important notes at the end of this document. #= Design 0 = standard 8 = insulated base For details refer to "Design options" on page 6. Page 9 of 17 B43701, B43721 Standard 85 °C Useful life1) For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which can be found on the Internet under the following link: http://www.epcos.com/designtools/alu_useful_life/Useful_life.swf The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional data for selected capacitor types under operating conditions defined by the user. Frequency characteristics of ESR Typical behavior Impedance Z versus frequency f Typical behavior at 20 °C 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 17 B43701, B43721 Standard 85 °C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes, although in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. We do, however, restrict the amount of dangerous materials used in our products to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 17 B43701, B43721 Standard 85 °C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Polarity Reverse voltage Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability Safety information Reference chapter "General technical information" Make sure that polar capacitors are connected 1 with the right polarity. "Basic construction of aluminum electrolytic capacitors" Voltages of opposite polarity should be prevented 3.1.6 by connecting a diode. "Reverse voltage" Screw terminal capacitors must not be mounted 11.1. with terminals facing down unless otherwise "Mounting positions of specified. capacitors with screw terminals" The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Do not exceed the upper category temperature. 7.2 "Maximum permissible operating temperature" Avoid external energy, e.g. fire. 8.1 "Passive flammability" Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 17 B43701, B43721 Standard 85 °C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the capacitors. Do not apply excessive mechanical stress to the capacitor terminals when mounting. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 °C and a relative humidity of ≤ 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 "Shelf life and storage conditions" Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 17 B43701, B43721 Standard 85 °C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazität Nennkapazität Serienkapazität Serienkapazität bei Temperatur T Kapazität bei Frequenz f Gehäusedurchmesser, Nennmaß Maximaler Gehäusedurchmesser Eigeninduktivität Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,RMS IAC,f IAC,max IAC,R Ileak Ileak,op l lmax R Rins Rsymm T ΔT TA TC TB t Δt tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulässiger Wechselstrom Nennwechselstrom Reststrom Betriebsreststrom Gehäuselänge, Nennmaß Maximale Gehäuselänge (ohne Anschlüsse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehäusetemperatur Temperatur des Gehäusebodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 14 of 17 B43701, B43721 Standard 85 °C Symbol V VF Vop VR VS XC XL Z ZT tan δ λ ε0 εr ω English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 π f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitätszahl Kreisfrequenz; 2 π f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 17 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). Page 16 of 17 Important notes 7. The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 17 of 17