BY229(X,B)-200 thru BY229(X,B)-800 Vishay General Semiconductor Fast Switching Plastic Rectifier TO-220AC FEATURES ITO-220AC • Glass passivated chip junction • Superfast recovery time for high efficiency • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 2 2 1 1 BY229 Series • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) BY229x Series PIN 1 PIN 1 CASE PIN 2 PIN 2 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-263AB K TYPICAL APPLICATIONS 2 For use in fast switching rectification of power supply, inverters, converters and freewheeling diodes application. 1 BY229B Series PIN 1 PIN 2 K HEATSINK MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for commercial grade, meets JESD 201 class 1A whiskter test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 8.0 A VRRM 200 V to 800 V IFSM 100 A trr 145 ns VF 1.85 V TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BY229-200 BY229-400 BY229-600 BY229-800 UNIT Maximum recurrent peak reverse voltage VRRM 200 400 600 800 V Maximum RMS voltage VRMS 140 280 420 560 V 200 400 600 800 Maximum DC blocking voltage VDC Maximum average forward rectified current at TC = 100 °C IF(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 100 A Maximum slope of reverse recovery current IF = 2.0 A, VR = 30 V, dI/dt = 20 µs dI/dt 60 A/μs TJ, TSTG - 40 to + 150 °C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Document Number: 88540 Revision: 06-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] V www.vishay.com 1 BY229(X,B)-200 thru BY229(X,B)-800 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) SYMBOL BY229-200 BY229-400 BY229-600 BY229-800 UNIT 20 A VF 1.85 V Maximum DC reverse current at rated DC blocking voltage TJ = 25 °C TJ = 125 °C IR 10 300 µA Maximum reverse recovery time IF = 1.0 A, VR = 30 V, dI/dt = 50 A/µs, Irr = 10 % IRM trr 145 ns Maximum recovered stored charge IF = 2.0 A, VR = 30 V, dI/dt = 20 A/µs Qrr 700 nC Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BY229 BY229X BY229B UNIT Typical thermal resistance from junction to case RθJC 2.0 4.8 2.0 °C/W Typical thermal resistance from junction to air RθJA 20 - 20 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC BY229-200-E3/45 1.80 45 50/tube Tube ITO-220AC BY229X-200-E3/45 1.95 45 50/tube Tube TO-263AB BY229B-200-E3/45 1.77 45 50/tube Tube TO-263AB BY229B-200-E3/81 1.77 81 800/reel Tape reel TO-220AC BY229-200HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC BY229X-200HE3/45 (1) 1.95 45 50/tube Tube TO-263AB BY229B-200HE3/45 (1) 1.77 45 50/tube Tube TO-263AB BY229B-200HE3/81 (1) 1.77 81 800/reel Tape reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88540 Revision: 06-Nov-07 BY229(X,B)-200 thru BY229(X,B)-800 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Resistive or Inductive Load Instantaneous Reverse Leakage Current (µA) Average Forward Rectified Current (A) 12 10 8 6 4 2 0 TJ = 125 °C TJ = 100 °C 10 1 TJ = 25 °C 0.1 0.01 0 25 50 100 75 125 0 150 20 40 60 80 100 Case Ambient Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Leakage Characteristics 150 100 TL = 75 °C 8.3 ms Single Half Sine-Wave 125 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) Peak Forward Surge Current (A) TJ = 150 °C 100 100 75 50 25 10 0 100 10 1 1 100 10 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance Instantaneous Forward Current (A) 100 TJ = 150 °C 10 TJ = 25 °C TJ = 100 °C 1 TJ = 125 °C Pulse Width = 300 µs 1 % Duty Cycle 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Document Number: 88540 Revision: 06-Nov-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 BY229(X,B)-200 thru BY229(X,B)-800 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7° REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 2 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88540 Revision: 06-Nov-07 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1