BIAS Power Technology, Inc. BIAS Standby Supply Module BPS200 Series The BPS200 Standby Power Supply Module is an ideal replacement for current standby power applications in appliances and consumer electronics. This low-cost supply provides up to two watt of output power, nominal output of 6, 12 or 14 VDC (Vo), and an additional regulated output of 3.3, 5.0 or 12.0 VDC (Vr) to maintain standby functions such as powering an LED, microprocessor or remote control sensor. Incorporating a custom integrated circuit into a small package, the BIAS Standby Module provides an immediate “drop-in” solution, requiring no additional external components. Features Low Cost Single Component Solution Quick Time-To-Market Universal Input (85 to 265 VAC) Small Size Operating Specifications (@120VAC / 60 Hz / 25ºC / 12VDC Vo unless otherwise specified) Electrical Input Voltage Range Output Power Efficiency Output (Vo) Regulation Vo Ripple Vo (@120 Hz) Regulated Output (Vr) Regulation Vr Ripple Vr (@120 Hz) No-load Consumption Lowest cost solution, best applied in constant load applications. 85 to 265 VAC (50/60Hz) 2.0 W max 70% nom. 6, 12, 14 VDC nom. +/- 5% (options B, C) 1V 3.3, 5.0, 12.0 VDC (option C) Isolation +/- 0.1% (option C) 30 mV (option C) 20 mW typical 3000 VAC Thermal Operating Temperature -10 to 85º C Operating Relative Humidity Storage Temperature 20 – 90% RH -40 to 105º C Mechanical Package Size (L x W x H) Safety 1 Safety Compliance 1 EMI Emissions 1 EFT/B Compliance 1 Certification pending 2 Utilizing external TVS device Option A: Constant Power Option B: Demand Power Designed for variable or intermittent load applications. Power is available upon demand and adjustable up to two watts. TBD UL1950 / EN60950 (VDE) EN 55011 / FCC Part 15-B 2 IEC 1000-4-4 Level 4 Specifications subject to change Option C: Demand Power with Voltage Regulation Provides dual isolated outputs for applications requiring a regulated output (Vr ±0.1%) in addition to the standard unregulated output. Rev. 7/18/02, Page 1 of 2 BIAS Power Technology, Inc., 414 South Vermont Street, Palatine, Illinois 60067 USA Phone: 888-772-7658 USA, 847-991-8516; Fax: 847-991-8526, www.biaspower.com BIAS Power Technology, Inc. Part Number Designation Model Series Power Configuration Vo Output Vr Reg. Output BPS: Standby Power Module 200: 2 Watt A: Constant Power B: Demand Power C: Demand Power with Regulation 06: 6 VDC 12: 12 VDC 14: 14 VDC 00: 33: 50: 12: Option N/A 3.3 VDC 5.0 VDC 12.0 VDC Ex: BPS200C–1250: standby module, 2W series with demand power adjustable up to 2W, Vo = 12V, Vr = 5.0V regulated Part Number Power Configuration BPS200A-0600 Vo 6 VDC Constant Power BPS200A-1200 Vr 12 VDC BPS200A-1400 Option N/A 14 VDC BPS200B-0600 6 VDC Demand Power BPS200B-1200 12 VDC BPS200B-1400 N/A 14 VDC BPS200C-0633 6 VDC Demand Power with Regulation BPS200C-0650 3.3 VDC 6 VDC 5.0 VDC BPS200C-1250 12 VDC 5.0 VDC BPS200C-1412 14 VDC 12 VDC Custom configurations available; contact BIAS Power Technology for specific applications Efficiency Characteristics of Regulation Package Dimensions 75 14Vo / 12.0 Vr BPS200C-1412 Efficiency (%) 70 65 6Vo / 5.0Vr BPS200C-0650 60 55 12Vo / 5.0Vr BPS200C-1250 6Vo / 3.3Vr BPS200C-0633 50 45 0 50 100 150 200 250 Regulated Current (mA) 300 350 Regulation Operating Range 400 Output Current (mA) 350 6Vo / 3.3Vr BPS200C-0633 300 250 200 12Vo / 5.0Vr BPS200C-1250 150 6Vo / 5.0Vr BPS200C-0650 100 14Vo / 12.0Vr BPS200C-1412 50 0 0 50 100 150 200 250 Regulated Current (mA) 300 350 Rev. 7/18/02, Page 2 of 2 BIAS Power Technology, Inc., 414 South Vermont Street, Palatine, Illinois 60067 USA Phone: 888-772-7658 USA, 847-991-8516; Fax: 847-991-8526, www.biaspower.com