TRSYS ER3G Surface mount superfast rectifier Datasheet

ER3A THRU ER3J
SURFACE MOUNT SUPERFAST RECTIFIER
VOLTAGE - 50 to 600 Volts CURRENT - 3.0 Amperes
FEATURES
l
For surface mounted applications
l
Low profile package
l
Built-in strain relief
l
Easy pick and place
l
Superfast recovery times for high efficiency
l
Plastic package has Underwriters Laboratory
SMC/DO-214AB
Flammability Classification 94V-O
l
Glass passivated junction
l
High temperature soldering:
260 /10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic
Terminals: Solder plated, solderable per MIL-STD750,
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 16mm tape (EIA-481)
Weight: 0.007 ounce, 0.21 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current,
at TL=75
Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=100
Maximum Reverse Recovery (Note 1)
Typical Junction capacitance (Note 2)
Typical Thermal Resistance (Note 3)
Operating and Storage Temp
NOTES:
SYMBOLS ER3A ER3B ER3C ER3D ER3E ER3G ER3J UNITS
50
100
150
200
300
400
600
Volts
VRRM
35
70
105
140
210
280
420
Volts
VRMS
50
100
150
200
300
400
600
Volts
VDC
I(AV)
3.0
Amps
IFSM
100
Amps
VF
IR
TRR
CJ
R JL
TJ,TSTG
0.95
1.25
5.0
200
35.0
45.0
16
-50 to +150
1.7
Volts
A
nS
PF
/W
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts
3. 8.0mm2 (.013mm thick) land areas
RATING AND CHARACTERISTIC CURVES
ER3A THRU ER3J
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC
Fig. 2-MAXIMUM AVERAGE FORWARD
AND TEST DIAGRAM
CURRENT RATING
Fig. 3-TYPICAL REVERSE CHARACTERISTICS
Fig. 5-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
Fig. 4-TYPICAL FORWARD CHARACTERISTICS
Fig. 6-TYPICAL JUNCTION CAPACITANCE
Similar pages