LITEON C150KRKT Ultra bright alingap chip led lamp Datasheet

Ultra Bright AlInGaP Chip LED Lamp
LTST- C150/170/190KAKT Red Orange
LTST- C150/170/190KFKT Yellow Orange
LTST- C150/170/190KRKT Super Red
LTST- C150/170/190KSKT Yellow
LTST- C150/170/190KYKT Amber Yellow
Features
High brightness AlInGaP material
Package in 8mm tape on 7" diameter reels.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow and wave solder process.
EIA STD package.
Description
The Red Orange source color devices are made with Aluminum Indium Gallium Phosphide on Red Orange Light
Emitting Diode.
The Yellow Orange source color devices are made with Aluminum Indium Gallium Phosphide on Yellow Orange Light
Emitting Diode.
The Super Red source color devices are made with Aluminum Indium Gallium Phosphide on Super Red Light Emitting
Diode.
The Yellow source color devices are made with Aluminum Indium Gallium Phosphide on Yellow Light Emitting Diode.
The Amber Yellow source color devices are made with Aluminum Indium Gallium Phosphide on Amber Yellow Light
Emitting Diode.
Devices
Part No.
LTST-
Lens
Source Color
Water Clear
AllnGaP Red Orange
Water Clear
AllnGaP Yellow Orange
Water Clear
AllnGaP Super Red
Water Clear
AllnGaP Yellow
Water Clear
AllnGaP Amber Yellow
C150KAKT
C170KAKT
C190KAKT
C150KFKT
C170KFKT
C190KFKT
C150KRKT
C170KRKT
C190KRKT
C150KSKT
C170KSKT
C190KSKT
C150KYKT
C170KYKT
C190KYKT
5-68
Package Dimensions
Pad Dimensions
(1) LTST-C150XKT
(3) LTST-C190XKT
SMD LAMPS
(2) LTST-C170XKT
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerance is 0.1mm (.004") unless otherwise noted.
3. Specifications are subject to change without notice.
5-69
Package Dimensions of Tape
(1) LTST-C150XKT
(2) LTST-C170XKT
(3) LTST-C190XKT
5-70
Package Dimensions of Reel
NOTES:
1. Empty component pockets sealed with top cover tape
2. 7 inch reel-3000 pieces per reel.
3. The maximum number of consecutive missing lamps is two.
4. In accordance with ANSI/EIA 481-1-A-1994 specifications.
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Derating Linear From 50
Reverse Voltage
Operating Temperature Range
Storage Temperature Range
Red
Orange
Yellow
Orange
Super
Red
Yellow
Amber
Yellow
Unit
75
75
75
75
75
mW
80
80
80
80
80
mA
30
30
30
30
30
0.4
0.4
0.4
0.4
0.4
5
5
5
5
5
-55
-55
mA
SMD LAMPS
Absolute Mmaximum Ratings at Ta=25
mA/
V
to +85
to +85
Wave Soldering Condition
260
for 5 Seconds
Infared Soldering Condition
260
for 5 Seconds
Vapor phase Soldering Condition
215
for 3 minutes
5-71
Electrical / Optical Characteristics and Curves at Ta = 25
Parameter
Symbol
Part No.
LTST-C150/170/190
Min.
Typ.
Max.
KAKT
16
80
200
KFKT
16
80
200
Super Red
KRKT
16
80
200
Yellow
KSKT
10
50
125
KYKT
16
80
200
Color
Red
Orange
Yellow
Orange
Luminous lntensity
IV
Amber
Yellow
Red
Orange
Yellow
Orange
Viewing Angle
2
KAKT
130
KFKT
130
Super Red
KRKT
130
Yellow
KSKT
130
KYKT
130
KAKT
621
KFKT
611
Super Red
KRKT
639
Yellow
KSKT
591
KYKT
598
KAKT
615
KFKT
605
Super Red
KRKT
631
Yellow
KSKT
589
KYKT
595
KAKT
18
KFKT
17
Super Red
KRKT
20
Yellow
KSKT
15
Amber
Yellow
KYKT
16
Amber
Yellow
Red
Orange
Yellow
Orange
Peak Emission
Wavelength
P
Amber
Yellow
Red
Orange
Yellow
Orange
Dominant
Wavelength
d
Amber
Yellow
Red
Orange
Yellow
Orange
Spectral Line
Half Width
Unit.
mcd
deg
nm
nm
Test
Condition.
I F=20 mA
Note 1
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
Note 3
nm
NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. 2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
5-72
Electrical / Optical Characteristics and Curves at TA = 25
Parameter
Symbol
Color
Typ.
Max.
KAKT
2.0
2.4
KFKT
2.0
2.4
Super Red
KRKT
2.0
2.4
Yellow
KSKT
2.0
2.4
KYKT
2.0
2.4
Red
Orange
Yellow
Orange
Forward Voltage
VF
Amber
Yellow
Red
Orange
Yellow
Orange
Reverse Current
IR
Part No.
LTST-
Min.
KAKT
100
KFKT
100
Super Red
KRKT
100
Yellow
KSKT
100
KYKT
100
Unit.
Test
Condition.
V
IF=20mA
A
Amber
Yellow
Red
Orange
Yellow
Orange
Capacitance
C
KAKT
40
KFKT
40
Super Red
KRKT
40
Yellow
KSKT
40
Amber
Yellow
KYKT
40
PF
VR=5V
V F=0 f=1MHZ
SMD LAMPS
NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. 2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
5-73
Typical Electrical / Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
5-74
Similar pages