FACTORY PROGRAMMED OSCILLATORS EQXOPL-2000 SERIES Low Jitter 8 pin Dual-in-Line Programmable Oscillators OUTLINE & DIMENSIONS DESCRIPTION The Euroquartz range of factory programmable oscillators provide custom frequency and specification oscillators within very short lead times. The parts are very reliable in use and have stabilities from ±25ppm over -40° to 85°C. In addition to the stability over operating temperature range customers may also choose from supply voltages of 2.7, 3.3 and 5.0 Volts, Enable/Disable or Power Down functions and output synchronous or asynchronous . FEATURES • • • • • • Very quick delivery available Industry-standard 8 pin DIL (1/2 size) package Frequency range 1MHz to 133MHz Ultra low jitter @ 1 million samples Supply Voltages 2.7 Volts, 3.3 Volts or 5.0 Volts Enable/Disable or Power Down options OPERATING LOAD CONDITIONS GENERAL SPECIFICATION Package Type: Frequency Range 5.0 Volt Supply: 3.3 Volt Supply: 2.7 Volt Supply: Frequency Stability*: 8 pin DIL, Resistance-welded Synchronous: Asynchronous: Output Disable Time Synchronous: Asynchronous: T/2ns typical, T+10ns maximum 10ns typical, 15ns maximum Maximum Capacitive Load TTL 5.0 Volt Supply 1.0MHz ~ 40MHz: 40.1MHz ~ 133MHz: 50pF 1.0MHz to 133.0MHz 25pF 1.0MHz to 100.0MHz 1.0MHz to 100.0MHz Maximum Capacitive Load CMOS ±25ppm to ±100ppm 5.0 Volt Supply (over operating temperature range) 1.0MHz ~ 66MHz: 50pF Operating Temperature Range 66.1MHz ~ 133MHz: 25pF Choice of three ranges: 0° ~ +70°C Part code: ‘C’ 3.3 Volt/2.7 Volt Supply -20° ~ +70°C Part code: ‘D’ 1.0MHz ~ 40MHz: 30pF -40° ~ +85°C Part code: ‘I’ 40.1MHz ~ 100MHz: 15pF Storage Temperature Range: -55° to +125°C Ageing: ±5ppm/year maximum PRODUCT SELECTION (Ta=25°C, Vdd=2.7V, 3.3V or 5.0V) Packaging: Bulk pack or tubed Frequency Operating Output Levels: TTL or CMOS Model Number Stability Temperature Maximum Output Loads (ppm) Range <40MHz: 30pF (See note opposite) EQXOPL-2100UC ±100 0°~+70° >40MHz: 15pF (See note opposite) EQXOPL-2050UC ±50 0°~+70° Duty Cycle EQXOPL-2025UC ±25 0°~+70° CMOS <40MHz: 45/55% maximum EQXOPL-2100UD ±100 -20°~+70° CMOS >40MHz: 40/60% maximum EQXOPL-2050UD ±50 -20°~+70° Output Clock Rise/Fall Times: 4ns maximum EQXOPL-2025UD ±25 -20°~+70° Power Supply Current: 25mA (unloaded ) EQXOPL-2100UI ±100 -40°~+85° Standby Current: 10µA typical 50µA maximum EQXOPL-2050UI ±50 -40°~+85° Start-up Time: 10ms maximum (from power-on) EQXOPL-2025UI ±25 -40°~+85° Power Down Delay Time Output Enable Time: T/2ns typical, T+10ns maximum 10ns typical, 15ns maximum (T = frequency period) 100ns maximum Period Jitter Σ, 1MHz~133MHz: 8ps typical, 99ps maximum Period Jitter Peak to Peak <33.0MHz: 65ps typical, 99ps maximum 33MHz~133MHz: 65ps typical, 80ps maximum PART NUMBER GENERATION Frequency Model No. Nominal Frequency (MHz) See table above EXAMPLE: Output Option Supply Voltage Blank = 5.0 Volts A= 3.3 Volts B= 2.7 Volts T = Tristate (Enable/Disable P = Power Down 24.8920MHz EQXOPL-2050UDTA Frequency = 24.8920MHz, EQXOPL-2000 package, ±50ppm -20°~+70°C, Tristate, supply voltage 3.3 Volts * The frequency stability parameter is an inclusive figure and includes adjustment tolerance at 25°C, stability over operating temperature SYNCHRONOUS/ASYNCHRONOUS range, variations due to load change ±10%, supply voltage change By default oscillators with Enable/Disable or Power Down functions are ±10%, first year ageing, shock and vibration. supplied ASYNCHRONOUS. If SYNCHRONOUS operation is required append ‘SYNC’ to the part number EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 1460 230000 Fax: +44 1460 230001 email: [email protected] web: www.euroquartz.co.uk