SHEET 1 OF 1 A 1 4 7 CONTACT CONFIGURATION TIMING (BBM) NON-SHORTING HARDWARE SUPPIED ON SWITCH ISOMETERIC 14.20 [.559 in] n26.00 [1.024 in] 2.00 [.079 in] 8.00 [.315 in] n17.30 [.681 in] n26.00 [1.024 in] 10.00 [.394 in] 0 .5 n] 27 83 i .0 [1 5.50 [.217 in]FLAT n6.35 [.250 in] 3/8-32 NEF-2A THREADS 30.0° 2.00 [.079 in] 6.60 [.260 in] n3.00 NOTE: [.118 in] 1. ALL DIMENSIONS IN MM[INCH]. 2. GENERAL TOLERANCE: X.X=`0.4 X.XX=`0.25 3. TERM. NOS. FOR REFERENCE ONLY. 4. CONTACT MATERIAL: GOLD 5. CONTACT RATING: 0.3A @ 125VAC 6. OPERATING FORCE 800 `300 CM/STANDARD 7. OPERATING TEMP: -30~C TO 85~C 8. CIRCUIT SP: 3 POSITION 90~ INDEX 9. DIELECTRIC STRENGTH: 500VAC-60 SEC. 10. HARDWARE SUPPLIED ON SWITCH: LOCKWASHER, HEXNUT, STOP RING 11. DENOTES CRITICAL PARAMETER. A 18587 REV PCR NO RELEASED FOR PRODUCTION DESCRIPTION 45.0° 18.80 [.740 in] 8/6/09 BLR DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE KC56A10.001NLF DATE 1.5:1 DR 8/6/2009 BLR REV DWG G510365 A