ABF-04 SERIES AC/DC Power Module 4W FEATURES ►Fully Encapsulated Plastic Case for PCB Mounting ►Universal Input 85~264VAC, 47~440Hz ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 3000VAC with Reinforced Insulation ►Operating Ambient Temp. Range -25°C to +60°C ►No Min. Load Requirement ►Overload/Voltage/Temp. and Short Circuit Protection ►Designed-in EMI Emission meets EN55011/22 Class B & FCC Level B ►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►Eco Design, Compliant to Energy Star Specification and ErP Directive 2009/125/EC ►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking PRODUCT OVERVIEW The MINMAX ABF-04 series is a new range of fully encapsulated AC/DC power supply modules. They are designed for direct PCB mounting with solder pins. The product features EMI-filter to EN55022, class B and EMS compliance to the EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. The ABF-04 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number Output Voltage VDC 3.3 5 9 12 15 24 +5 +3.3 +12 +5 ±12 ±15 ABF-04S03 ABF-04S05 ABF-04S09 ABF-04S12 ABF-04S15 ABF-04S24 ABF-04D53 ABF-04D125 ABF-04D12 ABF-04D15 Output Current Input Current Max. @Max. Load mA 1200 800 444 333 267 167 600 150 250 120 ±166 ±133 mA(typ.) 82 82 77 76 76 76 Max. capacitive Load Efficiency (typ.) @Max. Load μF 1200 800 440 330 260 160 5600 4700 330 4700 # 330 # 260 # For each output 72 72 76 76 % 70 72 75 76 76 77 72 75 77 77 Input Specifications Parameter Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:[email protected] 2015/07/31 REV:9 Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC --- --- 0.3 W 115VAC --- --- 15 A 230VAC --- --- 25 A Tel:886-6-2923150 Page 1 of 3 Min. ABF-04 SERIES AC/DC POWER MODULE 4W Output Specifications Parameter Output Voltage Setting Accuracy Line Regulation Conditions Min. Typ. Max. Unit Single and Dual Output Models ABF-04D53 & ABF-04D125 Single and Dual Output Models ----------------------No min. Load required --------- ±1.0 ±2.0 ±0.5 ±0.5 ±1.0 ±1.0 ±0.5 ±0.5 ±2.5 100 0.8 ±2.0 ±5.0 ±1.0 ±1.0 ±3.0 ±1.5 ±1.0 ±1.0 ±5.0 150 1.0 %Vnom. %Vnom. % % % % % % % mV P-P %VPP of Vo --- --- %Inom. 25 120 ±0.01 --- ----±0.02 5 %Inom. % of Vo %/℃ %Vout --- %Inom. Max. --------- Unit VAC MΩ KHz ms Hours Vo1 Vo2 ABF-04D53 & ABF-04D125 3.3VDC Output Model 5~24VDC and Dual Output Models Load Regulation Vo1 Vo2 3.3V & 5VDC Output Models Other Output Models ABF-04D53 & ABF-04D125 Ripple & Noise 0-20 MHz Bandwidth Single Output and Dual +/- Output Models Minimum Load Dual +/+ Output Models Zener diode clamp Over Voltage Protection Temperature Coefficient Overshoot Foldback, auto-recovery 105 --(long term overload condition may cause damage) Hiccup mode, Automatic Recovery Current Limitation Short Circuit Protection General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) Protection Class II Safety Approvals Conditions Input to Output, 60 Seconds 500 VDC Min. 3000 100 ----- MIL-HDBK-217F@25℃, Ground Benign Typ. ----130 20 330,000 According IEC/EN 60536 UL/cUL 60950-1 recognition(UL certificate) , IEC/EN 60950-1(CB-report) EMC Specifications Parameter Standards & Level Performance EMI Conduction and Radiation EN 55011,EN55022, FCC part 15 Class B EMS EN 55011,EN55024 ESD Radiated immunity Fast transient Surge Conducted immunity PFMF Dips Interruptions EN61000-4-2 air ± 8kV , Contact ± 4kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms B A B B B A B C Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Storage Temperature Range Power Derating Over Temperature Protection Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) E-mail:[email protected] 2015/07/31 REV:9 Conditions Min. Max. Unit Natural Convection -25 +60 ℃ Tel:886-6-2923150 Page 2 of 3 -40 +50℃ to +60℃ +85 0.3 at 90℃ (automatic recovery at 67℃) --95 Natural Convection --- 260 ℃ W/℃ % rel. H ℃ ABF-04 SERIES AC/DC POWER MODULE 4W Notes 1 2 3 4 5 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power supplies however they may not meet all listed specifications. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact factory Specifications are subject to change without notice Package Specifications Mechanical Dimensions Pin Connections 2x3.75 [2x0.15] Pin D12/D15 NC 2 NC D53/D125 +Vout +Vout +Vout1 4 -Vout Common Common 5 5 No Pin -Vout +Vout2 Bottom View 0.60 [0.02] 3 4 36.5 [1.44] 3 14.00 [0.55] 25.25 [0.99] 2 Single Output 1 6 AC(N) 7 AC(L) 7.50 [0.30] 6 7.50 [0.30] 1 21.00 [0.83] 27.0 [1.06] ►All dimensions in mm 3.75 [0.15] 3.00 [0.12] 7 4.0 [0.16] 17.1 [0.67] ►Tolerance: ±0.5 ►Pin (inches) (±0.01) diameter 0.6 ±0.1 (0.02±0.004) Physical Characteristics Case Size : 36.5x27.0x17.1mm (1.44x1.06x0.67 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 30g Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2015/07/31 REV:9 Page 3 of 3