Magnetics High Power High Performance Molded Surface Mount Inductors Model HA72E-06 Features and Benefits Operating Temperature Range -40°C to +155°C Temperature Rise, Maximum 50°C Operating Frequency Up to 3MHz AEC-Q200 Grade 0 CERTIFIED RoHS Compliant Specification @ 25°C HA72E-06R10LF HA72E-06R20LF HA72E-06R33LF HA72E-06R47LF HA72E-06R68LF HA72E-061R0LF HA72E-061R5LF HA72E-062R2LF HA72E-063R3LF HA72E-064R7LF HA72E-066R8LF HA72E-068R2LF HA72E-06100LF HA72E-06330LF DCR (mΩ) Inductance μH±20% Heating Current(2) (Adc) Isat (Adc) Typ. Max. 0.10 0.20 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 8.20 10.0 33.0 26.2 20.3 18.0 16.1 14.4 10.3 8.4 8.3 6.6 5.4 4.1 3.5 3.2 1.8 45.0 34.0 22.0 19.0 16.5 15.0 10.0 8.5 8.0 6.5 5.0 4.2 4.0 2.5 1.5 2.5 3.2 4.0 5.0 9.0 13.0 18.0 26.5 39.0 62.0 80.0 100.0 302.0 1.7 2.8 3.9 4.2 5.5 10.0 14.0 20.0 30.0 42.0 68.0 100.0 105.0 332.0 (1) Part Number (3) Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155°C. Outline Dimensions (mm) General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 7.17 High Power High Performance Molded Surface Mount Inductors Model HA72E-06 Electrical Characteristic @ 25°C Packaging / Ordering Information One reel (13”) 2000 pcs One shipping carton (6 reels) 12000 pcs Ordering Information 13" tape & reel packing Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10µH, "R" denotes the decimal point General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 7.17