Fairchild MMBF4117 N-channel switch Datasheet

PN4117 / 4118 / 4119 / MMBF4117 / 4118 / 4119
MMBF4117
MMBF4118
MMBF4119
PN4117
PN4118
PN4119
G
S
G
S
TO-92
SOT-23
D
D
Mark: 61A / 61C / 61E
NOTE: Source & Drain
are interchangeable
N-Channel Switch
This device is designed for low current DC and audio applications.
These devices provide excellent performance as input stages for
sub-picoamp instrumentation or any high impedance signal
sources. Sourced from Process 53.
Absolute Maximum Ratings*
Symbol
TA = 25°C unless otherwise noted
Parameter
Value
Units
40
V
VDG
Drain-Gate Voltage
VGS
Gate-Source Voltage
- 40
V
IGF
Forward Gate Current
50
mA
TJ ,Tstg
Operating and Storage Junction Temperature Range
-55 to +150
°C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics
Symbol
PD
TA = 25°C unless otherwise noted
Characteristic
RθJC
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Case
RθJA
Thermal Resistance, Junction to Ambient
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
1997 Fairchild Semiconductor Corporation
Max
Units
PN4117-4119
350
2.8
125
*MMBF4117-4119
225
1.8
357
556
mW
mW/°C
°C/W
°C/W
(continued)
Electrical Characteristics
Symbol
TA = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Max
Units
IG = - 1.0 µA, VDS = 0
VGS = - 20 V, VDS = 0
VGS = - 20 V, VDS = 0, TA = 150°C
4117
VDS = - 10 V, ID = 1.0 nA
4118
4119
- 40
- 0.6
- 1.0
- 2.0
- 10
- 25
- 1.8
- 3.0
- 6.0
pA
nA
V
V
V
4117
4118
4119
30
80
200
90
240
600
µA
µA
µA
70
80
100
210
250
330
µmhos
µmhos
µmhos
3.0
5.0
10
µmhos
µmhos
µmhos
3.0
µmhos
µmhos
µmhos
pF
1.5
pF
OFF CHARACTERISTICS
V(BR)GSS
Gate-Source Breakdown Voltage
IGSS
Gate Reverse Current
VGS(off)
Gate-Source Cutoff Voltage
V
ON CHARACTERISTICS
IDSS
Zero-Gate Voltage Drain Current*
VDS = 10 V, VGS = 0
SMALL-SIGNAL CHARACTERISTICS
Ciss
Input Capacitance
VDS = 10 V VGS = 0, f= 1.0 kHz
4117
4118
4119
VDS = 10 V VGS = 0, f= 1.0 kHz
4117
4118
4119
VDS = 10 V, VGS = 0, f= 30 MHz
4117
4118
4119
VDS = 10 V, VGS = 0, f= 1.0 kHz
Crss
Reverse Transfer Capacitance
VDS = 10 V, VGS = 0, f= 1.0 MHz,
gfs
goss
Re(yfs)
Common-Source Forward
Transconductance
Common-Source Output
Conductance
Common-Source Forwad
Transconductance
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 1.0%
60
70
90
PN4117 / 4118 / 4119 / MMBF4117 / 4118 / 4119
N-Channel Switch
5
(continued)
Typical Characteristics
Parameter Interactions
Transfer Characteristics
Transfer Characteristics
Transfer Characteristics
Transfer Characteristics
Transfer Characteristics
PN4117 / 4118 / 4119 / MMBF4117 / 4118 / 4119
N-Channel Switch
(continued)
Typical Characteristics
(continued)
Leakage Current vs. Voltage
Output Conductance
vs. Drain Current
Common Drain-Source
Capacitance vs. Voltage
PN4117 / 4118 / 4119 / MMBF4117 / 4118 / 4119
N-Channel Switch
5
Transconductance vs. Drain Current
Noise Voltage vs. Frequency
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
FAST 
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
PowerTrench 
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER 
SMART START™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. G
Similar pages