Miniature Aluminum Electrolytic Capacitors RoHS Compliant HIGH VOLTAGE, RADIAL LEADS, POLARIZED FEATURES • HIGH VOLTAGE (UP THROUGH 450VDC) • NEW REDUCED SIZES CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance After 1 min. Max. Leakage Current @ (20oC) After 2 min. Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. 85°C 2,000 Hours Shelf Life Test 85°C 1,000 Hours No Load MAXIMUM RIPPLE CURRENT (mA rms AT 120Hz AND 85oC) ���� ��� ��� ��� ��� �� �� �� �� �� ��� ��� ��� ��� includes all homogeneous materials *See Part Number System for Details 160 ~ 450 VDC 0.47 ~ 330µF -40 ~ +85°C:160~ 250V or -25 ~ +85°C:315 ~ 450V + 20% (M) CV < 1000µF = 0.03CV+ 15µA CV > 1000µF = 0.02CV+ 25µA W.V. (Vdc) 160 200 250 350 400 450 Tan δ 0.20 0.20 0.20 0.25 0.25 0.25 Z-25°C/Z+20°C 3 3 3 10 12 12 Z-40°C/Z+20°C 6 6 6 Capacitance Change Within +20% of initial measured value Tan δ Less than 200% of specified maximum value Leakage Current Less than specified maximum value Capacitance Change Within +20% of initial measured value Tan δ Less than 200% of specified maximum value Leakage Current Less than specified maximum value Max. Tan δ @ 120Hz/20°C ��� �µ�� RIPPLE CURRENT FREQUENCY PART NUMBER SYSTEM CORRECTION FACTOR NREH 100 M 350V 10X16 F . ������� ������� ����� ��� ��� ��� ��� ��� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� � �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� � �� �� �� �� �� ��� ��� ��� ��� ��� ��� � � � �� �� �� �� �� ��� ��� ��� ��� ��� ��� � � � ��� � �� �� �� �� ��� ��� ��� ��� ��� � � � � ��������� ���� ��� �� ���������� � ��µ� ������ � ��µ� ��� ��� ��� ���� ���� ��� ���� ���� ��� ���� LEAD SPACING & DIAMETER (mm) ���� ���� ��� ��� ��� ��� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� RoHS Compliant Case Size (Dφ x L) Working Voltage (Vdc) Tolerance Code (M=20%) Capacitance Code: First 2 characters significant, third character is multiplier Series Case Dia. (D∅) 5 6.3 8 10 12.5 16 18 Leads Dia. (d∅) Lead Spacing (F) Dim. α 0.5 2.0 0.5 0.5 2.5 0.5 0.6 3.5 0.5 0.6 5.0 0.5 0.6 5.0 0.5 0.8 7.5 0.5 0.8 7.5 0.5 Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm) ��� µ� NRE-H Series ������� ������� ����� ��� ��� ��� ��� ��� � � �� � � �� ��� � �� ��� � �� ��� � �� � � ���� �� � ���� �� � �� ���� � �� ���� � �� ���� � �� �� � �� �� � �� �� � �� � � �� � � �� ��� � �� ��� � �� � � ���� � � ���� �� � �� �� � �� ���� � �� ���� � �� �� � �� �� � �� �� � �� � � � �� � � �� ��� � �� � � ���� � � ���� �� � ���� �� � �� ���� � �� ���� � �� �� � �� �� � �� �� � �� �� � �� � ��� � �� ��� � �� � � ���� � � ���� �� � ���� �� � �� ���� � �� ���� � �� �� � �� �� � �� �� � �� � � � ��� � �� � � ���� � � ���� �� � ���� �� � �� �� � �� ���� � �� �� � �� �� � �� �� � �� �� � �� � � � MAXIMUM ESR (Ω AT 120HZ AND 20°C) ��� �µ�� ��� � � � ���� �� � �� �� � �� ���� � �� ���� � �� �� � �� �� � �� �� � �� �� � �� � � � � ���� ��� ��� ��� ��� �� �� �� �� �� ��� ��� ��� ��� ���� ����� ������� ������� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� � ���� � ���� � ���� PRECAUTIONS ® NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com β = L < 20mm = 1.5mm, L > 20mm = 2.0mm 51