HD74HC352 Dual 4-to-1-line Data Selectors/Multiplexers REJ03D0611–0200 (Previous ADE-205-490) Rev.2.00 Jan 31, 2006 Description Each of these data selectors/multiplexers contains inverters and drivers to supply fully complementary binary decoding data selection to the AND-OR-invert gates. Separate strobe inputs (G) are provided for each of the two four-line sections. Features • • • • • • High Speed Operation: tpd (Data to Y) = 16 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Ordering Information Part Name Package Type HD74HC352RPEL SOP-16 pin (JEDEC) Package Code (Previous Code) PRSP0016DG-A (FP-16DNV) Package Abbreviation RP Taping Abbreviation (Quantity) EL (2,500 pcs/reel) Function Table Select Input Data Inputs B X L L L L H H H A X L L H H L L H C0 X L H X X X X X C1 X X X L H X X X C2 X X X X X L H X C3 X X X X X X X L Strobe G H L L L L L L L H H X X X H L Select inputs A and B are common to both sections Rev.2.00 Jan 31, 2006 page 1 of 6 Output Y H H L H L H L H L HD74HC352 1 16 VCC Select B 2 15 Strobe 2G 1C3 3 14 Select A 1C2 4 13 2C3 1C1 5 12 2C2 1C0 6 11 2C1 Output 1Y 7 10 2C0 GND 8 9 Output 2Y Data inputs Strobe 1G Data inputs Pin Arrangement (Top view) Logic Diagram 1G 1C0 1C1 1Y 1C2 1C3 B A 2C0 2C1 2C2 2C3 2G Rev.2.00 Jan 31, 2006 page 2 of 6 2Y HD74HC352 Absolute Maximum Ratings Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature Symbol VCC VIN, VOUT IIK, IOK IO ICC or IGND PT Tstg Ratings –0.5 to 7.0 –0.5 to VCC +0.5 ±20 ±25 ±50 500 –65 to +150 Unit V V mA mA mA mW °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Input rise / fall time*1 Symbol VCC VIN, VOUT Ta tr, tf Ratings 2 to 6 0 to VCC –40 to 85 0 to 1000 0 to 500 0 to 400 Unit V V °C ns Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Item Input voltage Symbol VCC (V) VIH VIL Output voltage VOH VOL Input current Iin Quiescent supply current ICC Min Ta = 25°C Typ Max Ta = –40 to+85°C Unit Min Max 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 2.0 1.5 3.15 4.2 — — — 1.9 4.4 5.9 4.18 5.68 — — — — — — — 2.0 4.5 6.0 — — 0.0 — — — 0.5 1.35 1.8 — — — — — 0.1 1.5 3.15 4.2 — — — 1.9 4.4 5.9 4.13 5.63 — — — — 0.5 1.35 1.8 — — — — — 0.1 4.5 6.0 4.5 6.0 — — — — 0.0 0.0 — — 0.1 0.1 0.26 0.26 — — — — 0.1 0.1 0.33 0.33 6.0 6.0 — — — — ±0.1 4.0 — — ±1.0 40 Rev.2.00 Jan 31, 2006 page 3 of 6 Test Conditions V V V V Vin = VIH or VIL IOH = –20 µA Vin = VIH or VIL IOH = –4 mA IOH = –5.2 mA IOL = 20 µA IOH = 4 mA IOH = 5.2 mA µA Vin = VCC or GND µA Vin = VCC or GND, Iout = 0 µA HD74HC352 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Symbol VCC (V) Propagation delay time tPLH tPHL Output rise/fall time tTLH tTHL Input capacitance Cin 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 — Min — — — — — — — — — — — — — Ta = 25°C Typ Max — 125 16 25 — 21 — 160 18 32 — 27 — 100 10 20 — 17 — 75 5 15 — 13 5 10 Ta = –40 to +85°C Unit Test Conditions Min Max — 155 ns Data to Y — 31 — 26 — 200 ns A or B to Y — 40 — 34 — 125 ns G to Y — 25 — 21 — 95 ns — 19 — 16 — 10 pF Test Circuit VCC VCC Output Pulse Generator Zout = 50 Ω See Function Table 1G Input 1Y 1C0 to 1C3 CL = 50 pF A Output B 2Y 2C0 to 2C3 2G Note : 1. CL includes probe and jig capacitance. Rev.2.00 Jan 31, 2006 page 4 of 6 CL = 50 pF HD74HC352 Waveforms tr tf 90 % 50 % Input 10 % 10 % t PLH 0V t PHL 90 % Same-phase output VCC 90 % 50 % VOH 90 % 50 % 10 % t PHL 50 % 10 % t TLH t PLH t THL 90 % 90 % Inverse-phase output 50 % 10 % t THL VOL 50 % 10 % VOH VOL t TLH Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns 2. The output are measured one at a time with one transition per measurement. Rev.2.00 Jan 31, 2006 page 5 of 6 HD74HC352 Package Dimensions JEITA Package Code P-SOP16-3.95x9.9-1.27 RENESAS Code PRSP0016DG-A *1 Previous Code FP-16DNV MASS[Typ.] 0.15g D NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 16 9 c *2 Index mark HE E bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Dimension in Millimeters Min Nom Max D 9.90 10.30 E 3.95 A2 8 1 Z e *3 bp x A1 0.10 0.14 0.25 0.34 0.40 0.46 0.15 0.20 0.25 6.10 6.20 1.75 A M L1 bp b1 c A c A1 θ L y Detail F 1 θ 0° HE 5.80 1.27 e x 0.25 y 0.15 0.635 Z 0.40 L L Rev.2.00 Jan 31, 2006 page 6 of 6 8° 1 0.60 1.08 1.27 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .5.0