A P V- 1 6 E 16W Single Output Switching Power Supply F ■ Features Constant voltage design Protections: Short circuit / Over load / Over voltage Fully isolated plastic case Cooling by free air convection Small and compact size Class Ⅱ power unit, no FG No load power consumption <0.5W Pass LPS IP42 design Suitable for LED lighting and moving sign applications 100% full load burn-in test Low cost, high reliability 2 years warranty 110 SELV series LPS IP42 ■ Applications Indoor LED lighting LED decorative lighting LED office lighting LED signage ■ Description APV-16E series is one 16W AC/DC constant voltage mode single output LED power supply. It accepts input 180~264VAC and provides four models with different output voltage, 5V, 12V, 15V,24V, respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, APV-16E ideally fits the entry-level LED applications. ■ Model Encoding APV - 16E - 15 Output voltage Output wattage Series name File Name:APV-16E-SPEC 2015-12-22 A P V- 1 6 E 16W Single Output Switching Power Supply series SPECIFICATION MODEL OUTPUT DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER APV-16E-12 APV-16E-15 APV-16E-24 5V 2.6A 0 ~ 2.6A 13W 12V 1.25A 0 ~ 1.25A 15W 15V 1A 0 ~ 1A 15W 24V 0.67A 0 ~ 0.67A 16.08W 120mVp-p 120mVp-p 150mVp-p 80% 82% RIPPLE & NOISE (max.)Note.2 100mVp-p VOLTAGE TOLERANCE LINE REGULATION Note.3 LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE ±5.0% ±1.0% ±2.0% Note.6 HOLD UP TIME (Typ.) INPUT APV-16E-5 500ms, 30ms / 230VAC at full load 20ms/230VAC at full load Note.4 180 ~ 264VAC 254 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) PF>0.5/230VAC at full load 75% 79% AC CURRENT INRUSH CURRENT(Typ.) 0.3A/230VAC COLD START 50A(twidth=185μs measured at 50% Ipeak) at 230VAC 47 ~ 63Hz MAX. No. of PSUs on 16A 13 units (circuit breaker of type B) / 22 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE 0.25mA / 240VAC Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16V 17.5 ~ 21V 27.6 ~ 32.4V Protection type : Shut off o/p voltage, clamping by zener diode WORKING TEMP. -30 ~ +70℃(Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS IP42 approved; design refer to EN61347-1,EN61347-2-13 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH EMC Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3 EMC EMISSION Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A EMC IMMUNITY MTBF 1145.7K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION PACKING NOTE 77*40*29mm (L*W*H) 0.1Kg; 120pcs/14Kg/1.06CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:APV-16E-SPEC 2015-12-22 A P V- 1 6 E 16W Single Output Switching Power Supply Mechanical Specification series Unit:mm 90 82.5 77 150±10 2 IEC52 H03VVH2-F 0.75mm AC/N(Blue) AC/L(Brown) 15.5 40 19 +V(Red) -V(Black) 31 UL1569 20AWG T case 150±10 29 ※ T case: Max. Case Temperature Block Diagram I/P fosc : 67KHz EMI FILTER POWER SWITCHING RECTIFIERS RECTIFIERS & FILTER +V -V DETECTION CIRCUIT PWM CONTROL Derating Curve Static Characteristics 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 60 50 40 180 190 200 210 220 230 240 250 264 INPUT VOLTAGE (VAC) 60Hz File Name:APV-16E-SPEC 2015-12-22