RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASWSS0151 V5 Features • • • • • • • • Functional Schematic Low Insertion Loss: 0.65 dB @ 2.4 GHz Isolation: 24 dB @ 2.4 GHz Low Current Consumption: <10 μA @ -3 V Lead-Free SOT-363 Plastic Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of the SW-438 V1 RFC V2 RF1 GND RF2 Description M/A-COM’s MASWSS0151 is a GaAs MMIC SPDT switch in a low cost, lead-free SC70 (SOT-363) surface mount plastic package. The MASWSS0151 is ideally suited for applications that include transmit / receive switching for Bluetooth and WLAN equipment. The MASWSS0151 can also be used in applications up to 500 mW in cellular, PCS, DCS1800, GSM, CDMA, and other analog and digital wireless communications systems. Pin 1 Pin Configuration Pin No. Function Description 1 RF1 RF Input / Output 2 GND RF Ground 3 RF2 RF Input / Output The MASWSS0151 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information 4 V2 Control 2 Input 5 RFC RF Common Input 6 V1 Control 1 Input 1 Part Number Package Absolute Maximum Ratings 2,3 MASWSS0151 Bulk Packaging Parameter Absolute Maximum MASWSS0151TR-3000 3000 piece reel Input Power (1 GHz) +32 dBm MASWSS0151SMB Sample Board (Includes 5 Samples) Operating Voltage +8 Volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASWSS0151 V5 Electrical Specifications: TA = 25°C, VC = 0 V / -3.0 V, Pin = 0 dBm, Z0 = 50 Ω 4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss DC - 3.0 GHz dB — 0.65 0.8 Isolation DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz dB dB dB 29 — — 31 25 21 — — — Return Loss DC - 1.5 GHz 1.5 - 3.0 GHz dB dB — — 22 20 — — P1dB 1 GHz dBm — 31 — IP2 Two Tone, 10 dBm / Tone, 900 MHz, 5 MHz Spacing dBm — 81 — IP3 Two Tone, 10 dBm / Tone, 900 MHz, 5 MHz Spacing dBm — 55 — 2nd Harmonic 2.4 GHz, Pin = +20 dBm dBc — -70 — 3rd Harmonic 2.4 GHz, Pin = +20 dBm dBc — -60 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF nS — 20 — Trise, Tfall 10% to 90% RF, 90% to 10% RF nS — 10 — μA — 5 10 Control Current 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. Lead-Free SC70 (SOT-363)† Truth Table 5,6 5. 6. V1 V2 RFC-RF1 RFC-RF2 1 0 0 1 Off On On Off Differential voltage, V (state 1) - V (state 0), must be +2.1 V minimum and must not exceed 5 V. 0 = -5 V to 0 V, 1 = -2.9 V to 5 V. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. † Reference Application Note M538 for lead-free solder reflow recommendations. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASWSS0151 V5 Typical Performance Curves vs. Frequency over Temperature Isolation Insertion Loss -40ºC +25ºC -40ºC +85ºC 0.8 60 0.7 50 0.6 40 +25ºC +85ºC 30 0.5 20 0.4 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 F re que nc y (G H z) F re que nc y ( G H z) Return Loss -40ºC +25ºC +85ºC 15 20 25 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 F re que nc y ( G H z) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.