MSDM Series FAST / TTL Buffered Triple Independent Delays 14-Pin Package Commercial and Mil-Grade Versions FAST/TTL Logic Buffered 3 Independent Equal Delay Lines *** Unique Delays Per Line are Available *** Operating Temperature Ranges 0OC to +70OC, or -55OC to +125OC 8-pin DIP/SMD Versions: FAM3D Series 14-pin DIP/SMD Versions: FAI3D Series MSDM 14-Pin Schematic Vcc OUT 1 OUT 2 OUT 3 14 12 10 8 1 3 5 7 IN 1 IN 2 IN 3 GND Electrical Specifications at 25OC 14 Pin DIL TTL Buffered Delay Triple Independent Delays Tolerance Commercial MIL-Grade (ns) Part Number Part Number MSDM-5 MSDM3-5M 5 ± 1.00 MSDM-6 MSDM3-6M 6 ± 1.00 MSDM-7 MSDM3-7M 7 ± 1.00 MSDM-8 MSDM3-8M 8 ± 1.00 MSDM-9 MSDM3-9M 9 ± 1.00 MSDM-10 MSDM3-10M 10 ± 1.50 MSDM-15 MSDM3-15M 15 ± 2.00 MSDM-20 MSDM3-20M 20 ± 2.00 MSDM-25 MSDM3-25M 25 ± 2.00 MSDM-30 MSDM3-30M 30 ± 2.00 MSDM-35 MSDM3-35M 35 ± 2.00 MSDM-40 MSDM3-40M 40 ± 2.00 MSDM-45 MSDM3-45M 45 ± 2.25 MSDM-50 MSDM3-50M 50 ± 2.50 MSDM-60 MSDM3-60M 60 ± 3.00 MSDM-70 MSDM3-70M 70 ± 3.50 MSDM-75 MSDM3-75M 75 ± 3.75 MSDM-80 MSDM3-80M 80 ± 4.00 MSDM-90 MSDM3-90M 90 ± 4.50 MSDM-100 MSDM3-100M 100 ± 5.0 TEST CONDITIONS -- FAST / TTL VCC Supply Voltage ................................................ 5.00VDC Input Pulse Voltage ................................................... 3.20V Input Pulse Rise Time ....................................... 3.0 ns max. Input Pulse Width / Period .......................... 1000 / 2000 ns 1. Measurements made at 25OC 2. Delay Times measured at 1.50V level of leading edge. 3. Rise Times measured from 0.75V to 2.40V. 4. 10pf probe and fixture load on output under test. Dimensions in Inches (mm) Commercial Grade 14-Pin Package with Unused Leads Removed as per Schematic. (For Mil-Grade MSDM3 the Height is 0.335") .810 (20.57) MAX. .400 (10.16) MAX. .245 .275 (6.22) (6.99) TYP. MAX. OPERATING SPECIFICATIONS VCC Supply Voltage ................................... 5.00 ± 0.25 VDC ICC Supply Current .......................... 45 mA typ, 95 mA max. Logic “1” Input: VIH ....................... 2.00 V min., 5.50 V max. IIH ............................... 20 µA max. @ 2.70V Logic “0” Input: VIL ........................................... 0.80 V max. IIL ............................................ -0.6 mA mA VOH Logic “1” Voltage Out .................................. 2.40 V min. VOL Logic “0” Voltage Out ................................ 0.50 V max. PWI Input Pulse Width ........................... 100% of Delay min. Operating Temperature Range ........................... 0O to 70OC Storage Temperature Range ..................... -65O to +150OC P/N Description MSDM - XXX X Buffered Triple Delays: 14-pin Com'l: MSDM 14-pin MIL: MSDM3 Total Delay in nanoseconds (ns) Temp. Range Blank = Commercial M = Mil-Grade Examples: MSDM-25 = 25ns (25ns per Line) 74F, 14-Pin Thru-hole MSDM3-50M = 50ns (50ns per Line) 74F, 14-Pin, Mil-Grade Specifications subject to change without notice. Rhombus Industries Inc. .120 (3.05) MIN. .200 (5.08) TYP. .050 (1.27) TYP. .020 (0.51) TYP. .010 (0.25) TYP. .300 (7.62) MIL-GRADE: MSDM3 Military Grade delay lines use integrated circuits screened to MIL-STD-883B with an operating temperature range of -55 to +125OC. These devices have a package height of .335" Auto-Insertable DIP and Surface Mount Versions: Refer to FAI3D Series, same 14-pin footprint. For space saving, refer to FAM3D 8-pin Series For other values & Custom Designs, contact factory. MSDM 9901 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]