UNISONIC TECHNOLOGIES CO., LTD ABS22 THRU ABS210 SCHOTTKY BRIDGE DIODE 2.0A SCHOTTKY BRIDGE RECTIFIER DESCRIPTION The UTC ABS22 THRU ABS210 is a schottky bridge rectifier, it uses UTC’s advanced technology to provide customers with high surge current capability and low forward voltage drop, etc. The UTC ABS22 THRU ABS210 is suitable for surface mount application. - + ABS FEATURES * Glass passivated die construction * Low forward voltage drop * High current capability * High surge current capability * Designed for surface mount application SYMBOL ORDERING INFORMATION Ordering Number ABS22G-ABS-R ABS24G-ABS-R ABS26G-ABS-R ABS28G-ABS-R ABS210G-ABS-R Package ABS ABS ABS ABS ABS Packing Tape Reel Tape Reel Tape Reel Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-064 .A ABS22 THRU ABS210 SCHOTTKY BRIDGE DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL ABS22 200 200 200 140 ABS24 400 400 400 280 RATINGS ABS26 ABS28 ABS210 600 800 1000 600 800 1000 600 800 1000 420 560 700 2 UNIT Peak Repetitive Reverse Voltage VRRM V Working Peak Reverse Voltage VRWM V DC Blocking Voltage VDC V RMS Voltage VRMS V Average Rectified Output Current TA=100°C IO A Peak Forward Surge Current, 8.3ms Single IFSM 60 A Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature Range TJ -55 ~ +150 °C Storage Temperature Range TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL Junction to Ambient θJA Note: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. RATINGS 62.5 UNIT °С/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL Forward Voltage Per Element VF Peak Reverse Current at Rated DC Blocking Voltage IR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IF=1.0A IF=2.0A TA=25°C TA=125°C MIN TYP MAX UNIT 0.95 V 1.0 V 5.0 μA 200 μA 2 of 3 QW-R202-064 .A ABS22 THRU ABS210 SCHOTTKY BRIDGE DIODE TYPICAL CHARACTERISTICS 1.6 1.2 0.8 0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0 50 100 Case Temperature (°C) 150 Maximum Non-repetitive Forward Surge Current 60 Peak Forward Surge Current (A) Instantaneous Forward Current (A) 2.0 0.4 Typical Forward Characteristic 10 40 30 20 Single Half-sine-wave (JEDEC METHOD) 0 1 2 5 10 20 50 Number Of Cycles At 60Hz 0.1 TA=25℃ Pulse Width:300us 2% Duty Cycle 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Forward Voltage (V) Typical Reverse Characteristics 50 10 1.0 100 Instantaneous Reverse Current (μA) Average Forward Current (A) Maximum Forward Current Derating Curve 2.4 100 TA=125°C 10 TA=75°C 1 0.1 TA=25°C 0.01 0 20 40 60 80 100 120 140 Percent Of Rated Peak Reverse Voltage (%) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-064 .A