J Series Crystal ¾ 5mm X 3.2mm X 4 Pads Ceramic Package ¾ Wide Frequency Range ¾ Tight Tolerance and Stability ¾ Tape and Reel Packaging ESR CHART: ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance Load Capacitance Equivalent Series Resistance Mode of Operation Drive Level Insulation Resistance Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test 10.000MHZ to 50.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C ±3ppm per year max 7pF Max (See Part Number Guide for Options) See ESR Chart Fundamental 100µW Typical 500 Megaohms Min at 100VDC MIL-STD-883, Meth 2002, Cond B MIL-STD-883, Meth 2003 MIL-STD-202, Meth 215 MIL-STD-883, Meth 2007, Cond A MIL-STD-883, Meth 1014, Cond C MIL-STD-883, Meth 1014, Cond A Frequency Range 10.000MHz to 12.000MHz 12.000MHz to 16.000MHz 16.000MHz to 30.000MHz 30.000MHz to 50.000MHz ESR (Ohms) 70 Max 70 Max 60 Max 40 Max Mode / Cut Fund / AT Fund / AT Fund / AT Fund / AT MARKING: Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MECHANICALS DETAIL: 5.20 [.205] MAX 1.20 [.047] MAX 2.60 [.102] 3.40 [.134] MAX 3.40 [.134] 3 4 2 1 2.20 [.087] 1.40 [.055] 0.90 [.035] 1.20 [.047] 1.20 [.047] PIN CONNECTIONS PIN 1 CRYSTAL PIN 2 NO CONNECTION PIN 3 CRYSTAL PIN 4 NO CONNECTION 2.00 [.079] RECOMMENDED LAND PATTERN DIMENSION IN BRACKETS ARE IN INCHES PART NUMBER GUIDE: J Frequency 1 5mm X 3.2mm x 1.2mm 4 Pads Mode of Operation 1 = Fundamental Temperature Tolerance/Stability* Load Capacitance S = Series 16 = 16pF (Standard) XX = XXpF (8pF to 50pF) A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm** E = ±50 ppm / ±50 ppm F = ±30 ppm / ±30 ppm Operating Temperature A = 0°C to +70°C B = -20°C to +70°C C = -40°C to +85°C ** Value Added Options Blank = No Added Options T = Tape and Reel * Please consult with MMD sales department for any other parameters or options. ** Not all Frequency Tolerance/Stability options available at this temperature range. *** Not available in the 20MHZ - 40MHZ range. MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision 01/30/07 D