Strain Reliefs AS85049/41 and MS3057A Strain Reliefs M85049/41-3A MIL-DTL-5015 MS ”V” Thread (Mates to General Duty ‘A’ Endbell) Basic Part No. Dash No. SUPERCEDED SPECIFICATION MS3057-16A Basic Part No. Dash No. G D Cable Entry A Thread E F TABLE I Dash Conn. Shell A Thread Ref.(s) No. Class 2B 8S, 10S 3A 1/2 - 28 UNEF 4A 10SL, 12S, 12 5/8 - 24 UNEF 14S, 14 6A 3/4 - 20 UNEF 16S, 16 8A 7/8 - 20 UNEF 18 10A 1 - 20 UNEF 20, 22 12A 1 3/16 - 18 UNEF 24, 28 16A 1 7/16 - 18 UNEF 32 20A 1 3/4 - 18 UNS 36 24A 2 - 18 UNS 40 28A 2 1/4 - 16 UN 44 32A 2 1/2 - 16 UN 48 40A 3 - 16 UN Cable Entry Max .250 (6.4) .312 (7.9) .438 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .938 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) 2.375 (60.3) D Ref. .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .469 (11.9) .531 (13.5) .531 (13.5) .594 (15.1) .656 (16.7) E Dia ±.031 (0.8) .688 (17.5) .812 (20.6) .969 (24.6) 1.094 (27.8) 1.188 (30.2) 1.375 (34.9) 1.656 (42.1) 2.031 (51.6) 2.219 (56.4) 2.500 (63.5) 2.781 (70.6) 3.281 (83.3) F ±.031 .812 .875 1.062 1.156 1.250 1.469 1.688 2.031 2.281 2.688 2.938 3.500 (0.8) (20.6) (22.2) (27.0) (29.4) (31.8) (37.3) (42.9) (51.6) (57.9) (68.3) (74.6) (88.9) G ±.031 (0.8) .812 (20.6) .812 (20.6) .875 (22.2) .938 (23.8) .938 (23.8) .938 (23.8) 1.031 (26.2) 1.094 (27.8) 1.156 (29.4) 1.688 (42.9) 1.750 (44.5) 1.750 (44.5) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. Finish on M85049/41 is cadmium olive drab over electroless nickel (1,000 hour salt spray). © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 62-13