PBD1040CS~BD10200CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Voltage 40~200 V 10 A Current Features Plastic package has Underwriters Laboratory Flammability Classification 94V-O. For through hole applications Low power loss, High efficiency High surge capacity For use in low voltage, high frequency inverters free wheeling, and polarity protection applications Lead free in compliance with EU RoHS 2011/65/EU directive. Green molding compound as per IEC61249 Std..(Halogen Free) Mechanical Data Case: TO-252 Molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: As marking Standard packaging: 16mm tape (EIA-481) Approx. Weight: 0.0104 ounces, 0.297 grams Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL BD1040CS BD1045CS BD1050CS BD1060CS BD1080CS BD1090CS BD10100CS BD10150CS BD10200CS UNIT Maximum repetitive peak reverse voltage VRRM 40 45 50 60 80 90 100 150 200 V Maximum rms voltage VRMS 28 31.5 35 42 56 63 70 105 140 V VR 40 45 50 60 80 90 100 150 200 V Maximum dc blocking voltage Maximum average forward rectified current IF(AV) 10 A Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load IFSM 100 A Maximum forward voltage at 5A per diode Maximum dc reverse current at VF 0.7 o TJ=25 C 0.75 0.8 0.9 V 0.05 IR rated dc blocking voltage mA o TJ=100 C Typical thermal resistance 20 RJC 3 o C/W Operating junction and storage temperature TJ,T STG -55 to +150 -65 to +175 o C range Note: Both Bonding and Chip structure are available. May 26,2016-REV.04 Page 1 PBD1040CS~BD10200CS TYPICAL CHARACTERISTIC CURVES Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics Fig.5 Typical Reverse Characteristics Fig.6 Typical Reverse Characteristics May 26,2016-REV.04 Page 2 PBD1040CS~BD10200CS Fig.7 Typical Forward Characteristics Fig.8 Typical Forward Characteristics Fig.9 Typical Forward Characteristics Fig.10 Typical Forward Characteristics Fig.11 Operating Temperature Derating Curve May 26,2016-REV.04 Page 3 PBD1040CS~BD10200CS MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel May 26,2016-REV.04 Page 4 PBD1040CS~BD10200CS Part No_packing code_Version BD1040CS_L2_00001 BD1040CS_S2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1 Code 2 ~5 Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D May 26,2016-REV.04 st nd th Page 5 PBD1040CS~BD10200CS Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 26,2016-REV.04 Page 6