FF-0440-3 This filter series is available with current ratings of 3,6,8, and 10 amps. The filters are also produced with configurations featuring 1/4 tab terminals, AWG #18 leads, or with an IEC inlet connector. The design is intended for systems which have requirements to meet the following requirements: • FCC • EN55022 or other European requirements • MIL-STD-461D or E. Other configurations may also be available. Check with our engineering department if you don’t find what you need. Operating Voltage = 115/250 V~ Operating Current = 3 Amps Operating Frequency = 50 / 60 Hz Temperature Range = -20 TO 50 Deg. C Diel. Withstand (L-CASE) = 1500 V~ FOR 1 MIN. Diel. Withstand (L-L) = 1500 Vdc For 1 Min. Leakage Current = 0.5 ma @ 250 V~, 60 Hz Discharge Volt after 1.0 second = 10 V Max. Agency approvals = UL Order P/N: FF-0440-3 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884