Series AM3T-NZ 3 Watt | DC-DC Converter FEATURES: RoHS compliant 24 Pin DIP Package Shielded metal package High efficiency up to 83% Wide 2:1 input range Operating temperature -40oC to + 85oC Input / Output Isolation 1500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Models Single output Model AM3T-0505S-NZ AM3T-0509S-NZ AM3T-0512S-NZ AM3T-0515S-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 4.5-9 4.5-9 4.5-9 4.5-9 5 9 12 15 600 333 250 200 1500 1500 1500 1500 68 70 72 73 Models Dual output Model AM3T-0505D-NZ AM3T-0512D-NZ AM3T-0515D-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 4.5-9 4.5-9 4.5-9 ±5 ±12 ±15 ±300 ±125 ±100 1500 1500 1500 68 721 73 NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Nominal Typical 5 Maximum 4.5-9 Units VDC (Pi) Network Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Maximum 1500 > 1000 100 Units VDC MOhm pF Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Short circuit restart Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise www.aimtec.com F 051e R6.B Conditions Typical 20MHz bandwidth ±1 ±3p and ±5 n. Continuous Auto-recovery ±0.2 ±0.5 ±0.5 ±1 ±0.03 80 Tel: +1 514 620 2722 1 of 3 Maximum Units % % % % % % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ 3 Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load With derating above +71C 300 100 KHz o C o C o C 95 % -40 to +85 -55 to +125 Metal 15 1.25 x 0.80 x 0.40 inches 31. 80 x 20.30 x 10.20 mm >1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) g Dimensions 1500VDC Dual No pin -V Input -V Input No pin No pin N.C. No pin +V Output No pin -V Output V+ Input V+ Input No pin No pin -V Input -V Input Common No pin -V Output No pin +V Output No pin Common +V Input +V Input No pin 31.80 (1.25) 23.03 (0.91) 0.50 (0.02) 2 3 11 9 Bottom View 23 22 16 2.54 (0.10) Printed Face 15.24 (0.60) Single 20.30 (0.80) 1 2 3 9 10 11 12/13 14 15 16 22 23 24 Units Free air convection Pin Out Specifications Pin Maximum 14 5.08 (0.20) Built-in Stand-offs to ease PCB cleaning 4.10 (0.16) 10.20 (0.40) N.C.: not connected Filtering Single output Filtering Dual output Derating www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ 3 Watt | DC-DC Converter Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C External capacitors Vin (VDC) 5 Cin) (uF) Vout (VDC) Cout (uF) 100 3.3 5 12 15 2200 1000 470 330 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only