Kingbright APJKA4008RWC 4.0x0.8mm right angle smd chip led lamp Datasheet

4.0X0.8mm RIGHT ANGLE SMD CHIP LED
LAMP
PRELIMINARY SPEC
Part Number: APJKA4008RWC/A
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
WHITE
Description
The source color devices are made with InGaN on SiC Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
Features
z4.0mmx0.8mm RIGHT ANGLE SMT LED, 1.4mm THICKNESS.
zLOW POWER CONSUMPTION.
All devices, equipment and machinery must be electrically
grounded.
z WIDE VIEWING ANGLE.
zIDEAL FOR BACKLIGHT AND INDICATOR.
Applications
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
z traffic signaling.
zPACKAGE : 2000PCS / REEL.
z backlighting (illuminated advertising , general lighting).
zMOISTURE SENSITIVITY LEVEL : LEVEL 4.
z interior and exterior automotive lighting.
zELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V.
z substitution of micro incandescent lamps.
zTYP. COLOR TEMPERATURE:6500K
z reading lamps.
zCOLOR COORDINATES:X=0.31,Y=0.31 ACC. TO
z signal and symbol luminaire for orientation.
z marker lights (e.g. steps, exit ways, etc).
CIE1931(WHITE).
zOPTICAL EFFICIENCY:10.5 lm/W(TYP.)
z decorative and entertainment lighting.
zCOLOR REPRODUCTION INDEX:80
z indoor and outdoor commercial and residential
zRoHS COMPLIANT.
architectural lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is 0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 1 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
Selection Guide
Note2
Dice
Part No.
APJKA4008RWC/A
Lens Type
WHITE (InGaN)
Note3
luminous Intensity
Iv(mcd) @ 20 mA
Φv (mlm)
@ 20 mA
Viewing
Note1
Angle
Min.
Typ.
Typ.
2θ1/2
70
180
700
90°
WATER CLEAR
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power dissipation
Pt
114
mW
Reverse Voltage
VR
5
V
Junction temperature
TJ
110
°C
Operating Temperature
Top
-40 To +85
°C
Storage Temperature
Tstg
-40 To +100
°C
IF
30
mA
IFM
100
mA
Rth JA
Rth JS
400
160
°C/W
°C/W
DC Forward Current
Peak Forward Current
Note4
Thermal resistance
Note5
Junction/ambient
Junction/solder point
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data.
For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad),
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Chromaticity coordinate x acc.to CIE1931
IF=20mA [Typ.]
X
Chromaticity coordinate y acc.to CIE1931
IF=20mA [Typ.]
Y
Note1
Note1
Forward Voltage IF=20mA [Min.]
Forward Voltage IF=20mA [Typ.]
Forward Voltage
Unit
0.31
-
0.31
-
2.7
VF
Note2
IF=20mA [Max.]
Reverse Current (VR=5V)
Value
3.3
3.8
[Typ.]
0.01
IR
Reverse Current (VR=5V)
V
[Max.]
μA
10
Temperature coefficient of x
IF=20mA, -10°C≤ T≤100°C
[Typ.]
TC x
-0.1
10-3 / °C
Temperature coefficient of y
IF=20mA, -10°C≤ T≤100°C
[Typ.]
TCy
-0.2
10-3 / °C
Temperature coefficient of VF
IF=20mA, -10°C≤ T≤100°C
[Typ.]
TCV
-2.5
mV/ °C
Notes:
1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates.
2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V.
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 2 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
Brightness codes
Note1
Note2
luminous Intensity
Iv(mcd) @ 20 mA
Φv(mlm)
@ 20 mA
Code.
Min.
Max.
Typ.
M
70
130
300
N
110
220
480
P
180
320
710
Q
280
420
960
Notes:
1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the
typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.
White
APJKA4008RWC/A
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 3 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
APJKA4008RWC/A
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 4 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
Color Codes
White CIE
0.44
0.43
0.42
0.41
0.40
0.39
c1
0.38
0.37
0.36
c0
b4
0.35
0.34
0.33
b1
b3
0.32
0.31
b2
0.30
0.29
a1
0.28
a0
0.27
0.26
0.25
0.24
0.23
0.22
0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38
a0
a1
b1
X
0.264 0.283 0.296
0.280
X
0.248 0.275 0.283
0.264
X
0.283 0.330 0.330
0.287
Y
0.267 0.305 0.276
0.248
Y
0.286 0.321 0.305
0.267
Y
0.305 0.360 0.339
0.295
Reference CCT: 14000~9000k
Reference CCT: 14000~9000k
Reference CCT: 9000~5600k
b2
b3
b4
X
0.287 0.330 0.330
0.296
X
0.275 0.298 0.306
0.283
X
0.298 0.321 0.330
0.306
Y
0.295 0.339 0.318
0.276
Y
0.321 0.350 0.332
0.305
Y
0.350 0.379 0.360
0.332
Reference CCT: 9000~5600k
Reference CCT: 9000~7000k
c0
c1
X
0.330 0.361 0.356
0.330
X
0.321 0.366 0.361
0.330
Y
0.360 0.385 0.351
0.318
Y
0.379 0.419 0.385
0.360
Reference CCT: 5600~4600k
Reference CCT: 7600~5600k
Reference CCT: 6000~4600k
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 5 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
APJKA4008RWC/A
Recommended Soldering Pattern
(Units: mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
Reel Dimension
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 6 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
PACKING & LABEL SPECIFCATIONS
APJKA4008RWC/A
SPEC NO: DSAG3649
REV NO: V.5
DATE: JUN/29/2007
PAGE: 7 OF 7
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
ERP:1204000755
Similar pages